Nodelay S-AIR100 Wireless Surround Sound Amplifier User Manual
- June 14, 2024
- Nodelay
Table of Contents
S-AIR100 Wireless Surround Sound Amplifier
User Manual
Please carefully read the User Manual before using the product
Feature of Product
High Fidelity Sound Quality
Adopt the advanced 5.8G wireless audio technology of Avnera Company in the
United States, support the audio input sampling rate of 32-96kHz, and the
sound quality reaches the uncompressed stereo CD standard
Low Latency
The latency is as low as 14.8ms (typical, stereo), easily meeting the 5.1/7.1
home theater surround sound standard.
Long Distance
Advanced radio frequency technology and software algorithm, wireless
transmission distance up to 150m (line of sight range).
Anti-jamming
Easily upgrade your living room or professional theater to wireless surround
sound with superior auto-detection and broadband interference avoidance.
High Power
High-efficiency class-D digital power amplifier, the powerful output power is
enough to drive the surround speakers to create a shocking scene.
High Performance Circuit Design
From DAC to operational amplifier, from power supply to filter circuit,
everything is repeatedly debugged and determined by experienced engineers to
maximize the overall noise ratio of the circuit.
Wireless Transmitter
- Working status LED lights
- High level signal input amplitude adjustment
- Power supply
- High level signal input
- Low level signal input
Wireless Receiver
- Working status LED lights
- Power supply
- Speaker output
Specifications
Product Name: Wireless Audio Transmitting and Receiving Power Amplifier
Model: S-AIR100
Output Power: 100W (L+R, 40, THD=10%,DC24V)
Power Supply: DC24V(Wireless Receiver)
DC5V(Wireless Transmitter)
Wireless Frequency Range: 5. 725-5. 825GHz
Wireless Delay: 14. 8ms typ, for stereo
Sampling Frequency Range: 32-96KHz
Wireless transmission distance: Max 100m (Line of Sight)
Input Level: 2.3V/Vp-p(0dB)
Operating Temperature:0 to 40°C(32 to104 F)
Weight: 80g(Transmitter) 270g(Receiver)
Building a Wireless Surround 5.1 Home Theater Building a Projector
Wireless Sound System Connect The Transmitter to The 5.1CH Amplifier
Connect The Transmitter to The Projector Connect Surround Speakers to
The Receiver
Mi Adjust High Level Input Amplitude
Adjust the high level of the wireless surround transmitter according to the
field test results Input the volume potentiometer to realize the overall sound
pressure balance of the home theater speakers.
Notice
-
Please do not disassemble the product shell, it may cause product damage or other dangers.
Please do not arbitrarily dismantle, extrude ,ouncture,short circuiting this product or put this product into water,fire or expose this product in a place where temperature is higher than 40°C. -
The product is not suitable being treated as toys.
-
Please keep the fan out of the reach of infants and young children. When using in an environment with infants and young children, adult supervision is required to prevent infants’ fingers from touching the fan leaf.
-
Please use a qualified charger and data cable to charge the fan. If the data cable is aging or damaged, it should be replaced in time.
-
The fan is not easy to place on a vibrating table or item, which can cause it to slip and cause permanent damage.
MIFCC Regulatory Conformance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause hamaul interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which cab be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B limits. All peripherals
must be shielded and grounded. Operation with non-certified peripherals or
non-shielded cables my result in interference to radio or reception.
MODIFICATION: Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the device.
WE ARE HERE FOR YOU
www.nodelay.tech
Shenzhen Aiyin Digital Electronic CO.,LTD
TEL/FAX:(+86)755 29599123
Email:aiyindigital@outlook.com
Address: Room 3A08,Hengan Business Building,NO.15
Alley 1 of Cuigang, Hua ide Community, Flying Sub-District,
Baan District, Shenzhen City
2023. 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>