Bissell 1808C Aeroswift Vacuum User Guide

June 14, 2024
Bissell

AEROSWIFT
Vacuum
USER GUIDE
1808 SERIESBissell 1808C Aeroswift Vacuum

More of a video person? Look for this icon and go online for an instructional how-to video at www.bissell.ca

IMPROTANT SAFTY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM.
Alaa sir oe a odarivci: che oo slat s wider esc eather boda frompartle ye sr crs ip use saa npfsep coeaicbe ag cwairecescoa Whee sins ar olee ess) apolarce, asc cece abace chad ec emacs ceclusea ths follow ine
Do not unplug by pulling on » Do not use to pick up toxic
WARNING
To unplug, grasp the plug, material (chlorine bleach,
TO REDUCE THE RISK OF FIRE not the cord. ammonia, drain cleaner, etc.).
ELECTRIC SHOCK, OR INJURY:
» Do not handle plug or vacuum
» Do not pick up anything that is
» Do not leave vacuum cleaner cleaner with wet hands. burning or smoking, such as when it is plugged in. Unplug
» Do nol put any object into cigarettes, matches, or hot from outlet when not in use openings. Do not use with ashes. i. and before servicing any opening blocked; keep
» Do not use without filters in
» Do not use out doors or on openings free of dust, lint, hair, place. wet surfaces. and anything that may reduce
» Do not pick up hard or sharp low air flow. objects such as glass, nails,
» toy ose attention te neceseary
» Keep hair, loose clothing. screws, coins, etc. . . fingers, and all parts of body
» Use only on dry, indoor sprees arrow entzes ang tam apenrasand” “ace other than described in moving parts.
» Keep appliance on a level this User’s Guide, Use only
» Turn off all controls before surface, manufacturer’s recommended plugging ie. unplugging
» Do not carry the vacuum vacuum Cleaner, cleaner while it is running.
attachments. Utre when cleanin
» Do not use with damaged on stare ee wren cieaning
» Unplug before connecting cord or plug. If appliance is On Stairs. . or disconnecting the not working as it should, has
» Do not use to pick up TurboBrush™ Tool. been dropped, damaged, left flammable or combustible outdoors, or dropped into materials (lighter fluid, gasoline, water, have it repaired at an kerosene, etc.) or use in areas authorized service center. ners trey may be ae
» Do not pull or carry by cord, » 70 NOt USE Vacuum Cleaner in use cord asa handle, dose an enclosed space filled with a door on cord, or pull cord vapors given off by oil base around sharo edges or corners. paint, paint thinner, some moth Do not run appliance over cord proofing substances, flammmable Keep cord away from heated . dust, or other explosive or toxic surfaces, vapors.

THIS APPLIANCE HAS A POLARIZEDPLUG
SAVE THESE INSTRUCTIONS
To reduice thesseosle tre shoos< toe corlarck cab aocler zen obo tede clade ioyroertean tee orcer. Wis Gheowall fl tice ochre oaths only one wey Fo bae deg eas eb Po cui a cheeci tle everse the dielit sl fone, qe i sees aeta | a feud: | coer ey coors tlle arcocr 3 JI i Coretcban ae | BT SL vcd SAVE THESE INSTRUCTIONS FOR FUTURE USE
Tels micostis for heusebcla ose cnby.
Thanks for buying a BISSELL vacuum!
We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your vacuum works as well in two years as it does today, so this guide has tips on using (pages 6-7), maintaining (pages 7-9), and if there is a problem, troubleshooting (page 10). In just a few simple assembly steps, you’ll be ready to vacuum. Flip to page 5 and let’s get started!

What’s In The Box?

Bissell 1808C Aeroswift Vacuum - Box

NOTE: Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.

Product View

Bissell 1808C Aeroswift Vacuum - Box 1

  1. Handle
  2. TurboBrush’ Tool
  3. Crevice Tool (stored inside Extension Wand)
  4. Tank Release Button
  5. Stretch Hose
  6. Carry Handle
  7. Extension Wand
  8. Power Cord
  9. Bottom-Empty Dirt Bin
  10. Height Adjustment Knob
  11. Combination Dusting/ Upholstery Tool
  12. Lower Hose
  13. ON/OFF Pedal
  14. Recline Pedal

Cord Release and Storage Twist Cord Release down to quickly remove cord

Assembly

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating procedures.

Bissell 1808C Aeroswift Vacuum - Assembly

NOTICE
Brushroll continues to turn while product is turned on and handle is in upright position. To avoid damage to carpet, rugs, furniture and flooring, avoid tipping vacuum or setting it on furniture, fringed area rugs, or carpeted stairs during tool use.
NOTICE
With brushroll on, do not allow cleaner to sit in one location for an extended period of time, as damage to floor can result.

Install Filter

WARNING
Before using your vacuum, make sure that the dirt container is in locked position and that the filter is in place. DO NOT operate your vacuum without the filter.

Bissell 1808C Aeroswift Vacuum - Assembly 1

Power on & Settings

Bissell 1808C Aeroswift Vacuum - Assembly 2

TIP: for optimal carpet cleaning performance, adjust to the lowest practical setting. If your vacuum is difficult to push, adjust to the next higher setting.

Above Floor Cleaning

Bissell 1808C Aeroswift Vacuum - Assembly 3

Maintenance: Empty Dirt Tank

WARNING
To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.Bissell 1808C Aeroswift Vacuum - Assembly
Button

Maintenance: Clean Tank & Cyclone

Bissell 1808C Aeroswift Vacuum - Assembly Button 1

Maintenance : Filter

Bissell 1808C Aeroswift Vacuum - Assembly Button 2

WARNING
Do not operate vacuum with damp or wet filters, as well as without filters or the Dirt Container in place. Allow components to dry before reassembling the Dirt Container.
Maintenance: Check Brush & Belt
In Step 1 and 5, you will need a Phillips screwdriver.

Bissell 1808C Aeroswift Vacuum - Assembly Button 3

Bissell 1808C Aeroswift Vacuum - Assembly Button 4

Troubleshooting

To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

Problem| Possible causes|

Remedies

---|---|---
PowerBrush doesn’t rotate| Belt is broken or stretched| Follow maintenance instructions on checking brush and belt (page 9)
PowerBrush has lodged debris or other entanglements, keeping the brush from rotating| Check the PowerBrush and remove debris, also check the belt for any breaks or tears and replace if necessary
Vacuum won’t pick up dirt| Filters are dirty| Remove and rinse pre-motor and post-motor filters, allowing enough time for them to dry properly before reinserting
The Main Hose is not connected| Locate the Main Hose and reconnect by pushing the hose connection to secure the latch
There is a crack or hole in the Main Hose| If there is a crack or hole, order a new Main Hose from the BISSELL website
The Power Brush bristles are worn| Replace the PowerBrush
There is a clog in the vacuum| Remove debris and any other entanglements that may be restricting its rotation
The Dirt Container is not seated correctly| Press the Empty Button to release the Dirt Container and reseat properly
Dirt is escaping from the vacuumVacuum is hard to push| The Dirt Container is full| Empty the Dirt Container
Filters are missing| Check to see if the filter is in place
The Dirt Container is not seated properly| Press the Empty Button and remove the Dirt Container, then return it inserting the bottom first and pivoting the Dirt Container towards thevacuum (listen for a “click” sound indicating that it snapped into place)
Height adjustment knob is on too low of a setting| Place knob on highest setting and determine if there is any difference

Parts & Supplies
For Parts and Supplies, go to www.BISSELL.ca and enter your model number in the search field.

Warranty

This warranty gives you specific legal rights, BISSELL IS NOT LIABLE FOR INCIDENTAL and you may also have other rights which OR CONSEQUENTIAL DAMAGES OF ANY may vary from state to state. If you need NATURE ASSOCIATED WITH THE USE OF additional instruction regarding this warran- THIS PRODUCT. BISSELL’S LIABILITY WILL ty or have questions regarding what it may NOT EXCEED THE PURCHASE PRICE OF cover, please contact BISSELL Consumer THE PRODUCT.
Care by E-mail, telephone, or regular mail “EXCEPTIONS AND EXCLUSIONS FROM as described below. THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND Limited Two-Year Warranty IN LIEU OF ANY OTHER WARRANTIES Subject to the “EXCEPTIONS AND ; EITHER ORAL OR WRITTEN. ANY IMPLIED EXCLUSIONS identified below, upon receipt WARRANTIES WHICH MAY ARISE of the product BISSELL will repair or replace | By OPERATION OF LAW, INCLUDING (with new or remanufactured components THE IMPLIED WARRANTIES OF or products), at BISSELL’s option, free of MERCHANTABILITY AND  ITNESS FOR charge from the date of purchase by the A PARTICULAR PURPOSE, ARE LIMITED  original purchaser, for two years any TO THE FIVE YEAR DURATION FROM defective or malfunctioning part. THE DATE OF PURCHASE AS DESCRIBED See information below on “If your BISSELL ABOVE. product should require service”. This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User’s Guide is not covered.
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.
If your BISSELL product should require service:
Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.

Service

If your BISSELL product should require service:
Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.
Website: www.BISSELL.ca
E-mail: www.BISSELL.ca/email-us
Call: BISSELL Canada Consumer Care
1-800-263-2535
Monday- Friday 8am -lOpm ET
Saturday 9am – 8pm ET
Sunday 10am – 7pm ET
Please do not return this product to the store.
Other maintenance or service not included in the manual should be performed by an authorized service representative.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-263-2535,
Register your product today!
Registering is quick, easy and offers you benefits over the lifetime of your product.
You’ll receive:
Faster Service Special Promotions
Supplying your information now Optional: Register your email saves you time should you need to to receive notice of offers, contact us with questions regarding contests, cleaning tips and more! your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Visit www.bissell.ca/registration!
Visit the BISSELL website:www.bissell.ca
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number:
Please record your Purchase Date:
NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See Warranty on page 11 for details.
For cleaning tips and more visit www.BISSELL.ca or find us at:

Bissell 1808C Aeroswift Vacuum - Icon 2

Rate this product and let us (and millions of your closest friends) know what you think! www.bissell.ca

©2016 BISSELL Homecare, Inc.
BISSELL Canada Corporation
Mississauga, Ontario L5N OB3
All rights reserved, Printed in China
Part Number 161-0234 06/16
Visit our website at: www.BISSELL.ca

Documents / Resources

| Bissell 1808C Aeroswift Vacuum [pdf] User Guide
1808C Aeroswift Vacuum, 1808C, Aeroswift Vacuum, Vacuum
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Bissell User Manuals

Related Manuals