FLEWKEN A3.0 12 in 1 Planetarium Galaxy Projector User Manual
- June 14, 2024
- FLEWKEN
Table of Contents
FLEWKEN A3.0 12 in 1 Planetarium Galaxy Projector
Bringing you the real starry light show.
Unboxing Check
- Thank you for purchasing our products, please read the user manual carefully before use. The user manual contains necessary safety advice and user instructions, follow them to operate to avoid damaging the product for misuse.
- Check the product to ensure it is in good condition when received. Do not disassemble the host and component by yourself.
Package List
- Galaxy Projector x 1
- Type-C USB Cable x 1
- Film Discs x 2 Boxes (6pcs/box)
- User Manual x 1
Notices
Please use this product in a dark indoor environment.
This product requires the power adapter in DC 5V/2A, connecting with Type-C
USB cable.
Product Functions
- This product is an ultra-large focus adjustment projector with high resolution. Comes with 12pcs 4K HD film discs, freely choose your favorite film disc for projection.
- With an ultra-large projection area, this galaxy projector brings you into an immersive starry ambiance.
- Designed with a one-arm reinforced rotating stand, convenient to project at different angles.
Operating Instructions
Figures
Operations
Before use, please insert the film with the engraving “jUP” facing upward into the film tray (Please refer to the following page for instructions on replacing the film disc), plug the product to Type-C power port via USB cable and power on, it will automatically project the effect. The device default in 4 hours automatically shut off with slow rotating speed. After 40 minutes of operation, the device enters the breathing projection state by default.
- Power On/Off : Short press to power on/off. The device always powers on once plugged in by default.
- Rotation Speed : Adjust the projection rotating speeds, it defaults to slow speed. 3 speeds are optional: slow – fast – stop. Short press it to switch the rotating speed.
- Timer Setting : It normally shuts off in 4 hours. The timer indicator light is off by default. Short press it, “1 H” indicator light keeps on for setting 1 hour successfully as prompting; press it again, “2H” indicator light keeps on for setting 2 hours successfully as prompting; press it again to cancel the timer setting and enter a 4-hour auto shut off.
Change the film Discs
-
Standard: This galaxy projector comes with 12pcs film discs for optional.
-
Changing the film disc steps: Pinch the tray handle, pull out the film disc slot, then place one piece of film with the engraving “jUP” side facing upwards into the film slot, and then reset the tray back into the device. (see the following figures of the film replacement process)
-
Note: It is recommended to replace the film disc while the device is powered off.
Adjust Focus
- This product supports projection focus adjustment in 0.5m-3m/1.64-9.84ft.
- When adjusting the projection focus, you can refer to the current projection definition, and rotate the focus adjusted knob forward and reverse to make the projection effect more clearly.
Specifications
| Product Model | BL-DQY02 |
|---|---|
| Material | ABS |
| Power Input | DC 5V 2A |
| Maximum power | 10W |
| Projection Way | Film disc projection |
| Projection Area | The projection area is 7m’ – 16m’ /75.3ft’ – 172.2ft’ at a |
2m- 3m/6.56ft- 9.84ft projecting distance, and so on
Projection Source| LED light bead
Projection Distance| 0.5m-3m/1.64-9.84ft
Operating Temperature| -20’C- 50′ C/-4’F- 122’F
Storage Temperature| -20′ C- 60′ C/-4′ F- 140′ F
Operating Environment| Use in a dark indoor environment
Services
If there are any problems when experiencing the products, please feel free to contact us. Thank you for your cooperation!