Jpodream i35 Bluetooth Earphones User Guide
- June 14, 2024
- Jpodream
Table of Contents
i35 Bluetooth Earphones
User Guide
i35 Bluetooth Earphones
- Power On/Off /activate Sin
- LED indicator light
- Multi-function button
- Volume up / next song
- Volume down / previous song
2 YEARS GLOBAL WARRANTY!
Thank you for purchasing! This manual will guide you to use this headset
Tips:
- Ensure safety, please follow the rules mentioned in this manual. Before using the headset, we strongly recommend you read this manual;
- Please pay attention to sharp edges, uneven surfaces, metal parts, accessories and packaging to avoid any possible damage;
- Please do not dismantle and repair this product by yourself. This may cause complete damage, which are not covered by the warranty;
- Please do not wipe this product with oil or other corrosive liquid;
- Please do not use this product in dangerous places.
Basic parameters:
| Model | i35 | Connection range | 10 meters |
|---|---|---|---|
| Bluetooth version | V5.1 | playback time | 120 hours |
| Protocol | A2DR HFRHSP AVRCR SPP | Talking time | 120 hours |
Batten/ type/
specification| Polymer lithium battery 3.7V 1000mAh| Charging time| 3 hours
Speaker impedance| 320| Standby time| 1000 hours
Charging mode| USB-c charging port| Working frequency| 20-20KHz
Function| In-line control answering/hanging up/rejecting calls, power on and
off, volume adjustment, listening to music, pause, play, switch songs up and
down. Support Google IOS voice assistant.
Product application| Support any type of mobile phone with device, IPAD,
tablets, laptops, desktop computers. Desktop computers without Bluetooth
function must be used with Bluetooth adapters.
Pairing
- Keep the distance between the mobile phone and the headset within one meter, the closer the better.
- Press the power button ’①’ for 3 seconds and release when the indicator light ‘②’ flashes red and blue alternately, the headset has entered the pairing mode.
- Turn on the Bluetooth function of the mobile phone, search for devices, and click ‘i35’ to connect. When the connection is successful, the headset indicator light ‘②’ flashes blue slowly.
- After the pairing is completed, the headset and the mobile phone will remember each other, and there is no need to pair them again next time you use it. When the mobile phone is turned on, the headset will automatically connect after turning on.
Operating:
Play/Pause: Press button ‘③’ to play/pause music;
Volume up: Keep press button ‘ + ‘ to increase volume;
Volume down: Keep press button ‘-’ to decrease volume;
Next song: Short press’+’ button to play the next song;
Previous song: Short press ‘-‘ button to play the previous song;
Power off: Keep press button ‘①’ for 3 seconds to turn it off;
Low battery: The red indicator light ‘②’ flashes slowly, and there is a low
battery prompt ‘The battery is low, please charge’)：
Charge: plug the charger into the headset charging port (the red indicator
light is on);
Answer or end phone call: Click button ‘③’ ;
Reject phone call: Press button ‘③’ for 2 seconds;
Dial the last call: In standby mode or playing music mode double-click ‘③’;
Conversion mode: long press the MODE button for about 3 seconds;
Chinese and English conversion: Power on without pairing, double-click
button‘③’;
Start the voice assistant: Quick click the button ‘①’ twice to activate ‘Siri’
or ‘Google voice assistant’
Charging:
Connect the USB-C cable with headphones’ charging port. When charging the
indicator light ‘②’ is red, after fully charged the indicator light go off.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition, compliance with
exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>