HETP HX200K1 33800mAh USB C Power Bank Instructions
- June 14, 2024
- HETP
Table of Contents
HETP HX200K1 33800mAh USB C Power Bank Instructions
Please read this operation instruction before using the product.
Product Ports
Product Features
Safety: With multiple protection designs, several abnormal conditions such as overcharge, overdischarge, high temperature and short circuit can be easily handled no matter in charging, discharging or standby state to provide reliable guarantee for your mobile phone and digital device.
Efficiency: With quick charging and discharging efficiency, supporting
quick charging and discharging, Multi protocol intelligent output.
Compatibility: embedded with intelligent USB charge controller,
compatible with main stream mobile phone and digital device, supporting main
stream quick charging and discharging device.
Quality: Choose high-quality lithium polymer batteries and customize
charge and discharge
Product Introduction
Thank you for your selection. This product is a type of high-capacity portable power source with high quality Li polymer electric core and customized charging and discharging electric chip, which performs well in safety, efficiency and compatibility, etc.
Basic parameters
Product model: HX200K1
Battery type: Li-polymer electric core
Input parameter: Type-C–5V/2.1A. Micro–5V/2.1A
Output parameter: 4USB —5V/2.1A
Dimension: ～23.7×80×159mm
Usage temperature: 0℃~45℃
Product Operation
Power Indicator Switch
To view the current remaining power of the product, you can tap the switch to re-light the LED display to view the current remaining power of the product (if there is no other operation, the display will go out again after about 30 seconds) During the discharging process, tap this switch twice continuously to end the current discharging state, and tap this switch again to start the discharge again.
Charging Charge the product with a brand power adapter connection. LED display shows current battery charge while charging( Normal input: the IN symbol is bright).
Discharging
This product uses a smart identification charging design. When the digital product is connected with a USB power cable, the digital product can be intelligently and automatically recognized, and the charging function can be activated. LED display shows current battery charge during charging(Normal discharge: the OUT symbol is on).
Notice
- Please fully charge this product before first usage.
- During the usage of this product, please lighten the screen of digital product and confirm that the charging connection label is correctly displayed to ensure that the product is in normal working condition.
- During the charging for this product or charging for digital product with this product, please select adaptive connecting line by yourself.
- If the performance of this product is insufficient when charging a digital product, please charge it as soon as possible.
- During the connection between the digital product and this product, the digital product has priority to use the electric quantity of this product.
- When the digital product is fully charged, please take out the connecting line in time to avoid loss.
- If the product enters into protection status due to output short circuit or other reasons (LED has no display after pressing buttons), it can be recovered by charging activation via external charger
Warning
Since this product contains Li-ion electric core, it’s forbidden to dismantle the product shell arbitrarily to avoid possible damage to electric core or other dangers.
It’s forbidden to arbitrarily dismantle, squeeze, puncture this product or put it in short circuit, water, fire or exposed to an environment with a temperature higher than 60℃ (140℉).