Beikell B6007 Car Phone Holder User Guide
- June 14, 2024
- Beikell
Table of Contents
Beikell B6007 Car Phone Holder
Welcome
Thank you for purchasing this Beikell product. In order to ensure optimum performance and safety, please read this user manual carefully and keep it for future reference. If you need any additional assistance, please contact our customer support team or send us an email to support@ibeikell.com.
Package Contents
- 1 x Car Holder
- 1 x Long Arm Base
Structure Picture
Product Specifications
Materials: PC
Applicable Places: Windshield/Dashboard
Long Arm Base Installation Steps
-
Loosen the fixed nut completely, let the ball joint through the fixed nut (The thread must face the groove) and push it to the groove behind the car holder firmly.
-
Tighten the fixed nut.
-
Use a wet cloth to clean the place (windshield or dashboard) where the car holder needs to be installed, and then wait for it to dry.
-
As shown, push the suction cup lock up until it is fully open.
-
Attach the suction cup to the windscreen/dashboard. Press the suction cup firmly and then press the suction cup lock to lock it. (Hint: Suction cup sticks better when left to stand for 24 hours after locking.)
-
Adjust the angle of the car holder to align it with the sight line. (Twiddle the length adjustment knob to adjust the length of the arm. Twiddle the angle adjustment knob to change the angle of the arm.)
Using Steps
-
Press the quick release button on the side of the car mount and the clamp arm will automatically pop open.
-
Open the supporting feet.
-
Place the phone and push the clip arms at both ends to tighten the clip arms and hold the phone firmly.
-
After use, press the quick release button again to open the clip arms and take out the phone.
Warning
- Please install the car holder on a suitable place before starting driving navigation, do not operate and adjust the car holder during driving.
- Do not install the car holder on a place which will influence the operation of airbag and driving.
- Keep the car holder away from children.
Customer Support
TEL: 1-800-360-5881
EMAIL: support@ibeikell.com
WEBSITE: www.ibeikell.com
© Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
All rights reserved.
Beikell Car Phone Holder
Model No.: B6007
Manufacturer: Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
Manufacturer Address: Room 302, Building 8, Yunli Intelligent Park, Fada
Road, Bantian Street, Longgang District, Shenzhen, Guangdong, China
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>