CXY T13 Multi Function Portable Car Jump Starter User Manual

: June 14, 2024
: CXY

Table of Contents

CXY T13 Multi Function Portable Car Jump Starter
What’s in the Box
AT A GLANCE
SPECIFITIONS
HOW TO RECHARGE THE JUMP STARTER
HOW TO JUMP START A CAR
CHARGE VARIOUS DIGITAL DEVICES WITH T13
LED FLASHLIGHT
CUSTOMER SERVICE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CXY T13 Multi Function Portable Car Jump Starter

CXY-T13-Multi-Function-Portable-Car-Jump-Starter-
product

Friendly Tips
Please carefully read the instruction manual and use product correctly based on the instruction manual so that you can be familiar with the product more conveniently and quickly! Please keep the user manual for future reference.

What’s in the Box

CXY T 13 Jump Starter x 1
Battery clamps with starter cable x1
High quality USB-A to USB-C cable xl
High quality USB-C to USB-C cable xl
Cigarette lighter converter x1
Jump starter carry case xl
User manual x1

AT A GLANCE

Power Button
Jump Button
Jumping port
USB C output/input: PD 60W
USB output: QC 18 w
DC output: 12V/6A
LED Light

SPECIFITIONS

Capacity: 16000mah/59.2wh
Weight: 1 S00g/52.9oz
Size:
- 22690S4mm
- 8.93.52.1 in
USB-C Input: 5V/ 3A 9V/ 3A 12V/ 3A 15V/3A 20V/3A (PD 60W)
USB-C Output: 5V/ 3A 9V/ 3A 12V/3A 15V/3A 20V/3A (PD 60W)
USBOutput: 5V/3A 9V/ 2A 12V/1.5A (QC18W)
DC Output: 12V/6A
Starting Current: 700A
Peak Current: 1500A

HOW TO RECHARGE THE JUMP STARTER

2 ways to recharge the jump starter:

Use a USB-C charger adapter and the USB-C cable we provided to recharge the jump starter via the USB-C port. Support PD 60W fast charging (60W PD charger adapter required)
Use 5521 connector chargers (5521 DC car charger, 5521 laptop charger, 5521 AC to DC adapter charger) to recharge the jump starter via the 5521 DC port.

PLEASE BE NOTED:

This product is designed for vehicles with 12V battery only. Do not attempt to jump start vehicles with a higher battery rating, or different voltage.
If the vehicle isn’t started immediately, please wait for 1 minute to allow the jump starter to cool down before next attempt. Do not try to restart the vehicle after three consecutive attempts as this may damage the unit. Check your vehicle for other possible reasons why it can’ t be restarted.
If your vehicle battery is dead or its battery voltage is under 2V, it’s unable to activate the jump cable and your vehicle will not be started.

HOW TO JUMP START A CAR

Switch on your jump starter and make sure it’s over 25% charged. $CXY-T13-Multi-Function-Portable-Car-Jump-Starter-fig- $2$$
Insertjumper cable into jumping port.
Connect red clamp to positive(+) terminal and black clamp to negative(-) terminal of the car battery.
Press the Jump button for 3 seconds.
- Display screen shows Orange”READY”means the jump starter and clamps are at standby mode.
- Display screen shows Green “READY”means it’s all ready to start your car.
- Display screen shows”RC” means the clamps and car battery negative and positive poles are connected reversely. Please connect them correctly and try again.
- Display screen shows “LV” means low voltage, please recharge the jump starter then try again.
- Display screen shows u HT” means clamps over heat, please wait for several minutes to cool down then try again.
- Display screen flicker”188″ means the jump starter over heat, please wait for several minutes to cool down then try again.
Start your engine.
Remove clamps and jump starter. $CXY-T13-Multi-Function-Portable-Car-Jump-Starter-fig- $3$$

CHARGE VARIOUS DIGITAL DEVICES WITH T13

This product has 3 output ports for multiple charging demands. Such as cellphone, tablet, iPad, laptop, PSP, gamepad, car vacuum cleaner (with the provided cigarette lighter converter) and more.