Mcpiwohy S9 Rechargeable Vertical Ergonomic Mouse User Manual
- June 14, 2024
- Mcpiwohy
Table of Contents
Vertical mouse S9 user manual
Does the product have a 2.4 GHz wireless lithium battery and the cable version
is optional
Does packing list: (mouse, receiver, charging line, manual) *1
S9 Rechargeable Vertical Ergonomic Mouse
OPTICAL VERTICAL MOUSE
Healthy Mouse HOMOO S9
This mouse is full of vitality, innovation, and has many healthy benefits.
By changing the way you use your wrist and arms, you will effectively reduce
pain and discomfort. Add rubber oil coating to prevent sweaty fingers from
sliding. From the office to gaming, using the optical vertical mouse is
comfortable and healthy.
Connecting USB Receiver
Take out the receiver from the package box and insert USB receiver into the USB port on your computer. For the first time use, please toggle the power switch(on the bottom of the mouse) to the “ON” position, the mouse and USB receiver will automatically connect.
Intelligent sleep and wake up
The mouse has automatic wake up and sleep function. If it not use for a while,
the mouse will automatically enter a dormant status, you can press any button
on the mouse to wake up the mouse.
The mouse lights will continue to flash and keep working with the receiver.
Turning off the mouse
When the mouse does not need to be used, toggle the power switch to the “OFF” position. You can leave the USB receiver in computer or put it back into the slot under the mouse for safe keeping.
Rechargeable batteries (using 5 c)
It uses 5C rechargeable lithium battery. Please use the original charging
line(provided by original factory). The product can be used while charging,
but will extend the charging time. When battery is low, it will power off
automatically to avoid the danger of excessive discharge.
Charge indicator: light bright for charging status, lamp light will stay on.
If it is flashing, there may be poor contact, please check the connection.
It need 3—4 hours for a full charge and wiill last 30 to 60 days. It can be
recharged 300 times.When charging, charging port LED shine blue;
Full charge, LED turn off.
Notes: This product has 3 configurations, A .B.C for your choice.
Configure A: lithium battery version, this version has a built in rechargeable
lithium battery, with an additional USB charging cable.
Configure B: AAA battery wireless models, loaded with 2 AAA batteries,
shipping do not including 2pcs AAA battery Configuration C: wired models, a
USB cable to connect the equipment power supply
Appendix
Technical parameters Specification
Measurements (LWH):105 x 73 x 60(mm)
Weight (grams): 80.5g(bare computer)
Operational range: > 10m
Transmit power: +5db max
Operation voltage: 3.7v
Operation current: < 10mA
Charging current: <300mA
Sleep current: <1 uA
Sensitivity: wired:3200-2400-1600-1000dpi fourth gear cycle
li—ion battery:800—1200-1600dpi
dry battery:800—1200-1600dpi
Computer system requirements:
Windows 2000
Windows XP
Windows Vista, Windows CE, Windows 7, Windows10
Linux Android
Maintenance
Do not attempt to remove the device or replace lithium battery , or it will
make the warranty be invalid and may cause it to short circuit; fire and
explosion danger.
The battery will discharge if do not use for a long time.
Use the specified charger. Disconnect the device after the battery has been
fully charged. Overcharging the battery will shorten the life of the battery.
Use only a damp cloth with mild soap to clean the device. Solvents and other
cleaning agents may cause damage to the device.
Don’t expose device to very hot or very cold environment. Extreme temperature
can make electricity shorten the mouse life.
Troubleshooting
Following are some basic troubleshooting scenarios for the device.
Please contact support from the place of purchase if you’ re unable to resolve
any issues with the device.
| Malfunction | The possible reasons | The solution |
|---|
The mouse
no respond| 1 , The battery is low 2,Power switch is turned off 3,The device
is installing the driver| 1,Solution A: charge for at least 15 minutes
Solution B: if using for the first time propose a full charge before use
2,Check if the switch has been turn to ‘ON” position 3, Check the light on
the buttom of mouse if is bright
unable to conn— ect to the USB receiver| 1,The receiver not inserted
correctly 2,Low battery shut— down automatically| 1,Pull out the receiver and
re—insert into USB port 2,Use the mouse on a full charge again
the mouse pointer is irregular or slow to respond| 1,Equipment may not be the
optimal receiving range
2,Low voltage
3,Dust and oil on the laser at the bottom 4,The mouse DPI is too low|
1,Move mouse closer to the receiver
2,Please charge or change batteries
3,Use wet cloth clean the bottom of the laser 4,change the DPI by press left
key and middle wheel together
Product can not charge| 1,Low battery
2, Poor connection
3,Charging line damaged| 1,Please contact the local dealer to replace 2,Check
whether the product is connected to the charger safely.
3,Replace the new charging line