Russell Hobbs 23060 Supreme Steam Traditional Iron User Guide
- June 14, 2024
- Russell Hobbs
Table of Contents
23060 Supreme Steam Traditional Iron
User Guide
23060 Supreme Steam Traditional Iron
23060 Steam Iron Help Guide
To get the most from your product and to avoid damaging it please read the
instruction manual. Here are some key points.
Do not use descaler or scented water in any iron – it damages the steam
generating material and may cause a brown discharge from the soleplate.
You may use the iron with tap-water, but if you live in a hard water area, you
should use distilled water (not chemically descaled or softened water). If you
buy distilled water, check that it’s suitable for use in irons.
- Check for textile care symbols .
- Iron fabrics needing low temperatures first, then those that need medium temperatures and finish with those needing high temperatures .
TEMPERATURE SETTING GUIDE
| Label marking | Dot setting |
|---|---|
| cool – nylon, acrylics, polyester | |
| warm – wool, polyester mixtures | |
| hot – cotton, linen | |
| Max – denim | max |
| do not iron | – |
If the instructions on the fabric label differ from this guide, follow the instructions on the label.
STEAM IRONING
- To steam iron, set the temperature control to S or higher.
- Set the steam control S = no steam, S = high steam.
- Wait till the light goes out, then start ironing.
SELF CLEAN – To avoid scale build up, use the self-clean function at least monthly in normal water areas, more often in hard water areas. You’ll need a basin or a large bowl to catch the water coming out of the soleplate.
- Fill the reservoir to the max mark.
- Set the temperature control to max, set the steam control to S.
- Sit the iron on its heel.
- Put the plug into the power socket and wait till the light goes out.
- Hold the iron over the basin or bowl, with the soleplate down.
- Press the C and hold it down.
- Gently move the iron to and for, over the basin or bowl.
- Water and steam will wash scale and dust through the soleplate.
- When the reservoir is empty, release the C button.
- Unplug the iron, and sit it on its heel