PD CA7-A Power Bank 22 5W User Guide

POWERBANK

User Guide CA7-A

Please read this operation instruction carefully before using this product and keep it properly.

Product Diagram

1. Output(USB)
2. Input(Micro)
3. Input/Output(Type-C)
4. LCD Display
5. Power Button

Specification

Model: CA7-A
Capacity: 27000mAh/99.9Wh
Battery Type: Polymer Battery
Input(Micro): 5V⎓2A 9V⎓2A 12V⎓1.5A
Input(Type-C): 5V⎓2.5A 9V⎓2A 12V⎓1.5A
Output(Type-C): 5V⎓3A 9V⎓2.22A 12V⎓1.67A(PD 20W)
Output(USB): 5V=3A 5V=4.5A 9V⎓2.22A 12V⎓1.67A(MAX 22.5W)
Charging Time:

1. About 8 hours(9V/2A)
2. About 13 hours(5V/2A)
   Working Temperature: 32°F -122°F (0°C-50°C)
   Product Size: 14.86.62.6cm/5.82 2.61.02in
   Product Weight: 410g/14.46oz

Functions

1 ) The LCD display will start flashing when the power bank is charging, and the green light will come on if a fast charge input is detected.
2 ) When the charger is unplugged , the LCD Display will turn off afterabout 30 seconds and enter standby.

2. Power Button

1. In the OFF mode, short press the power button once, the LCD Displaywill show the current battery level and will automatically enter standby mode after 35 seconds.
2. Double click will enter the OFF mode.

3. Discharge Function

1. When the power bank is charging the mobile phone, the LCD Display will display the power in a long-lasting manner. After the power is discharged, the LCD Display will all turn off.

2. When the phone is unplugged to interrupt charging, the LCD Display will stay on for about 35 seconds and then turn off to enter standby mode.

3. When the mobile phone is charged or the load current is less than about 60mA, the power bank will turn off the output and enter the standby mode.

4. There is an identification chip circuit in the Apple Lightning charging cable, which is equivalent to a light load. When connecting the power bank to charge the iPhone, if the iPhone is disconnected from the plug for more than 30 seconds, it will enter the standby mode after the LCD Display is oft For charging, you need to unplug and insert the USB plug or press the wake-up button to charge. It will not be affected by other mobile phones other than iPhone.

Precautions

1. For the first use, please fully charge the product;
2. If the product has abnormalities such as battery expansion, leakage, deformation, water immersion, or short circuit, stop using it immediately;
3. Do not drop or use this product in high temperature, humid, strong magnetic environment;
4. Keep this product out of the reach of children;
5. Do not leave this product in the car, the closed high temperature environment will damage our battery;
6. When charging is completed, please unplug the connection line in time to avoid loss;
7. When the product enters the protection status due to short circuit, over-discharge, etc.(the performance is that the product has no output), it can be reactivated by shortly pressing the switch button. If it is invalid, please connect to the external power adapter to charge to recover;
8. Do not use an all-in-one data cable to charge multiple devices at the same time to prevent damage to the devices;
9. If the power bank is not used for a long time, over-discharge may occur. In order not to affect the performance of the power supply, please fully charge and discharge the power bank at least every 3 months.

Warning

• This product contains lithium-ion batteries. To avoid danger caused by cell or other hazards, do not open the shell without authorization;
• To avoid fire hazards, don’t disassemble, crush, puncture, short product, or fire, or be exposed to temperatures above 60°C environments.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>