Vacoulery 60LED Solar Outdoor Light Chain Instructions

Vacoulery 60LED Solar Outdoor Light Chain

INSTALLATION INSTRUCTIONS

STEP 1

Insert the spike into the connecting rod.

STEP 2

Assemble the solar panel to cradle on the anchor spike.

STEP 3

Tear off the protective film.

STEP 4

Press the power button before use.

STEP 5

Put the solar panel into your garden and make sure the panels are fully exposed to the sun.

Specifications

• Solar Panel: 2V/100MA 2V/150MA|2V/200MA 2V/250MA 2V/300MA
• Battery: D1.2V/800MAH 2V/800MAH | 2V/1200MAH |2.2V/1000MAH
• Number of LED: _30PCS 40PCS 50Pcs 60Pcs Other
• Colour of LED: Warm White Cool White Multi-color Other

Note

1. Make sure the switch of the lights is turned to “ON” status; if not, the battery will not be charged. Please tear off the protective film from the solar panel before use.
2. Please put them under the sun for direct sun exposure to get fully charged. Make sure to get them charged for more than 6 hours of direct sunlight during the day. After being charged, the lamp will light up when the solar panel is in a dark environment or when the solar panel is fully covered.
3. The garden solar lights are ONLY designed to be protected from the rain. Please do NOT immerse them in the water.
4. Please charge the solar panel before using it for the first time to avoid running out of power during transportation.

Method of Operation

1. Connect the solar panel and the stake.
2. Drive the stake into the ground and make sure that the solar panel is not sheltered from the sun.
3. Set the lights on the places you want.
4. Tear off the protective film on the solar panel. Press the button ON/OFF to turn it on and

it will work normally. You can also change the mode through the button MODE and set TIMER.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>