NLFGUW M416 Electric Gel Ball Blaster Toys Instruction Manual
- June 14, 2024
- NLFGUW
Table of Contents
M416 Electric Gel Ball Blaster Toys
NLFGUW®
PRODUCT MANUAL
Use instructions
Step 1. Put about 500 water beads bullets into a bigger container.
Step 2. Add about 1000ml water into it for 4 hours.
Step 3. Take out the water beads bullets and drain them water, then put the soaked water beads bullets into the hopper.
Step 4. Fasten the hopper cover to install into the gel ball blaster.
Remark 1. Drain the gel ball blaster when it’s soaked.
Remark 2. Pls use 7/8mm water beads bullets as standard for this gel ball blaster. Remark 3. If you don’t play the gel ball blaster for more than 2 hours, pls put bullets back into water to avoid dehydration.
WARNING
1. Recommended for ages 12 and above.
2. Charge the battery for at least 2 hours.
3. Soak your gel balls for 3 hours or more for maximum hydration.
4. Do not fire the gel ball blaster at people or animals.
5. Wear safety glasses when using Gel ball blaster.
6. Especially Noted: It needs to be equipped with 7-8mm water beads as standard.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>