AVLT DM84-1 Dual 27 Inch 43 Inch RGB Gaming Monitor Arm Desk Mount Instruction Manual
- June 14, 2024
- AVLT
Table of Contents
AVLT DM84-1 Dual 27 Inch 43 Inch RGB Gaming Monitor Arm Desk Mount
Disposal : The product with this mark indicates that this product
shouldn’t be disposed of with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the local recycle service or contact
your point of purchase to withdrawn the product.
IMPORTANT:
Failure to read, thoroughly understand, and follow all instructions can result
in serious personal injury, damage to equipment, or voiding of factory
warranty.
INSTRUCTIONS OF SAFETY AND WARNINGS:
- Make sure that the mounting surface is strong enough to handle a mounted product and equipment.
- DO NOT EXCEED THE MAXIMUM LISTED WEIGHT CAPACITY.
- Always use an assistant or a mechanical lifting device to safely lift and position heavy
- Tighten Screws firmly, but do not over-tighten. Over-tightening can cause product damage that greatly reduces the holding power.
- To protect sentence to manor let i it on the proud product.
- This artist may contain smit items that could be a choking hazard if swallowed. Keep children away unless the product is intended for their use and all instructions and manuals are fully reviewed and understood by them.
- Check that the product is secure and safe to use at regular intervals (at least every three months).
Should you ever have any questions or feel you require help please contact your place of purchase for assistance.
Compatible 75 100×100 00 200х200
PARTS
INSTALLATION
Note : Manage the USB cables as shown prior to setting up the clamp or grommet installation.
Safety Caution: Gas spring arm contains tension energy!
- Firmly hold the two halves of the gas spring arm together and have another person cut the cable zip tie
- Slowiy allow the gas spring arm to gradually stretch apart until fully extended to release the stored tension energy.
To properly balance the arm with monitors mounted, adjust the spring tension using the supplied Allen Key as follows:
CAUTION : To avoid damage to monitors or mount, always keep the arm in a
horizontal position while making adjustments. Again, ask for assistance if
required.
Note : If the display rotation does not stop at your desired position,
tighten the screws as shown.
Note : If the display tilt and swivel does not stop at your desired
position, tighten the screws as shown.
Button Function of Lighting:
- On/Off: Press and hold it for 2 seconds
- Change Light Mode: Quick press to switch to the next light mode (20 modes in total)
- Random Color Mode: Quick double press
- Memory: The system automatically stores the last used setting
If you have any questions or concerns about this product.
Please feel free to email us at
support@avlab.com.tw
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>