hager XEVA130 Round foot for a Charging Station Instruction Manual
- June 14, 2024
- hager
Table of Contents
XEVA130 Round foot for a Charging Station
installation manual
XEVA130 One charging station circular pedestal
XEVA135 Double charging station circular pedestal
XEVA116 Grounding kit for pedestal
XEVA150 Anchorage for XEVA13x
XEVA160 Drilling plate for pedestal XEVA13x
Fixation
Before fixing the pole, please ensure that all cables or conduits coming from the electrical cabinet are present & the location of the terminal.
- Location requirements
- Assembling the embedded base
- Sealing the embedded base
If the installation is carried out without a recessed base, use the drilling template on page 7. In case of chemical sealing use threaded rods with a diameter of 12 mm.
- Place all the cables inside the post and pass them through their respective holes.
- Fix the post to the ground using the nuts.
Installation of earthing cables
The equipotential earth connection must be made between the terminal, the
post and the support.
Follow the instructions in the “Opening” chapter of the instructions supplied
with the terminal. Then follow the steps described below.
Technical characteristics
XEVA130/XEVA135: terminal mounting posts
Weight| 78kg
Dimensions (D x H)| 200 x 1300 mm
Length of ground wires| 12m
Ground wire section| 16 mm?
Operating temperature| -25°C 4 +55°C
Storage temperature| -25°C 2 +70°C
Color| RAL 7021
Finishing| laqué mat
XEVA116: grounding kit
Weight| 5kg
Ground cable length| 10m
Earth cable section| 50 mm2
Operating temperature| -25°C 4 +55°C
Storage temperature| -25°C 4+70°C
XEVA150: recessed base
Weight| 3.6 kg
Dimensions (L x H x D)| 400 x 700 x 108 mm
Operating temperature| -25°C 4 +55°C
Storage temperature| -25°C a +70°C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>