Contever B1M 202 Pcs Complete Epoxy Resin kit Instructions
- June 14, 2024
- Contever
Table of Contents
Epoxy Resin Operation Guide
- Not suitable for children under 3 years. Children aged 3-6 need to do DIY crafts accompanied by their parents.
- It is recommended to wear protective gloves, avoid skin contact.
- Make sure you are working in a well-ventilated room or area.
- Please make sure to mix according to 1:1 volume ratio.
- Please stir it slowly for 3-5 minutes until no swirls are seen. Make sure to scrape the cup to stir thoroughly.
- Do not add too many liquid colorants. Never add more than 6% of the total volume of the mixed resin.
- Please complete the operation within 30-40 minutes to ensure the effectiveness of the finished product.
- Full Cure: 8-24 hours. Demold Time: 24-48 hours.
- Optimal operating temperature is70°F-80°F (21°C-26°C)
Warm Tips for use in winter
lf used in a low temperature environment, please separately soak the resin Aand hardener B in warm water before using, and then stir until the epoxy resin becomes thin. (Note: If the resin and hardener are too cold, the curing process may be delayed or even stopped.)
COMMON PROBELMS & SOLUTION FOR RESIN ART
EPOXY WON’T CURE?
A: Add too much epoxy pigment or mica powder.
B: Resin A and Hardener B were not mixed in a 1:1 volume ratio
C: The temperature is too low or the relative humidity is too high.
(Optimum operating temperature is 70°F-80°F).
D: The stirring time is too short and the stirring is insufficient (3-5
minutes stirring clockwise)
HOW TO AVOID AIR BUBBLES?
a. Soak the resin and hardener separately in warm water before mixing them.
b. Stir slowly and in one direction, Stirring too fast can easily cause air
bubbles, Please stir slowly and in one direction
c. When making epoxy resin, the larger the volume, the faster the curing time.
You can use a heat gun to eliminate air bubbles.
d. The optimal operating temperature is 70°F-80°F (21°C-26°C), If the
temperature is too high, the resin will be cured faster and the self- defaming
time will be shortened, resulting in bubble problems.
WHAT SHOULD I DO IF EPOXY DRIPS ON MY HANDS?
We recommend to wear protective gloves when use resin product.
If you accidentally touch the skin, please wash it with soap or hand
sanitizer.
How to Use Resin Jewelry Making Kit
Pour A and B into the measuring cup at a volume ratio of 1:1.
Stir slowly for about 5 minutes until the liquid is transparent.
Pour the mixed resin into each dosing cup.
Add the color pigment, glitter or other decorations and stir.
Slowly pour the mixed resin into the mold.
The finished work can be demolded after curing at least of 24 hours.
Insert about 1/2 length of the drill, screw the head tightly.
Fasten the upper screw and turn the handle for drilling.
Then connect your finished work with keyring, leather cord, or ear hook.