PS140 User Manual v1.0

DEVICE INITIALIZATION

1. Connect Main Power & Ignition Input to initialize device.
2. Device will take 3 – 5 min to initialize.
3. Red LED Indicates that device is ON.
4. Blue LED shows GSM status. If it blinks at every 1 sec it means searching for GSM network and if it blinks at 2 sec then device is registered to GSM network.
5. Green LED shows GPS status. If GPS fix then it will remain ON otherwise it will keep blinking.
6. After device is initialized and GPS is fix, it will start sending packets to server..

IMPORTANT INSTRUCTIONS FOR SMS COMMANDS

1. Keep SMS delivery report ON in your mobile phone before sending SMS commands.
2. Wait for 60 sec for device response, after the SMS is delivered.
3. If there is no response from device in 60 sec then send SMS command again.
4. If SMS command is sent, then don’t send next SMS command before 60 sec or device response.
5. If SMS not delivered in 60 sec, then send the command again.

OTA SMS COMMANDS

There are 3 types of commands:

1. SET Commands: To set device parameter values
2. GET Commands: To retrieve device parameter values
3. CLR Commands: To clear device parameters

Format:

SET Command: #<4 digit password>#SET:#;
GET Command: #<4 digit password>#GET:#;
CLR Command: #<4 digit password>#CLR:#;

OTA SMS Commands are as below:

1|
---|---
Device Parameter| Private Server IP Port
Description| Main Server IP Port on which customer will have live tracking facility
Parameter ID| PIP
SET Command| #1234#SET: PIP #192.168.1.1,9001;
GET Command| NA
CLR Command| NA

2|
---|---
Device Parameter| Govt. Server IP Port
Description| Govt. Primary Server IP Port for live location data and alerts
Parameter ID| GIP
SET Command| #1234#SET: GIP #192.168.1.1,9001;
GET Command| #1234#GET: GIP #
CLR Command| #1234#CLR: GIP #

3|
---|---
Device Parameter| Emergency Server IP Port
Description| Govt. Emergency Server IP Port for panic alerts
Parameter ID| EIP
SET Command| #1234#SET: EIP #192.168.1.1,9001;
GET Command| #1234#GET: EIP #
CLR Command| #1234#CLR: EIP #

4|
---|---
Device Parameter| APN
Description| Access Point Name for SIM operator
Parameter ID| APN
SET Command| #1234#SET: APN #airtelgprs.com;
GET Command| #1234#GET: APN #
CLR Command| #1234#CLR: APN #

5|
---|---
Device Parameter| SOS Number
Description| Backend Control Centre Mobile Number for SMS Fallback in case of panic alerts and no GPRS connectivity
Parameter ID| SOS
SET Command| #1234#SET: SOS #9212499082;
GET Command| #1234#GET: SOS #
CLR Command| #1234#CLR: SOS #

6|
---|---
Device Parameter| Vehicle Registration Number
Description| Vehicle Number in which device is installed
Parameter ID| VRN
SET Command| #1234#SET: VRN #DL01CE9898;
GET Command| #1234#GET: VRN #
CLR Command| #1234#CLR: VRN #

7|
---|---
Device Parameter| Logs Interval 1
Description| Data rate in sec when vehicle ignition is ON
Parameter ID| LOGS
SET Command| #1234#SET: LOGS #20;
GET Command| #1234#GET: LOGS #
CLR Command| #1234#CLR: LOGS #

8|
---|---
Device Parameter| Logs Interval 2
Description| Data rate in sec when vehicle ignition is OFF
Parameter ID| LOG2
SET Command| #1234#SET: LOG2 #600;
GET Command| #1234#GET: LOG2 #
CLR Command| #1234#CLR: LOG2 #

9|
---|---
Device Parameter| Health Packet Time Interval
Description| Data rate in sec at which health packet will be sent to server
Parameter ID| HPTI
SET Command| #1234#SET: HPTI #120;
GET Command| #1234#GET: HPTI #
CLR Command| #1234#CLR: HPTI #

10|
---|---
Device Parameter| Emergency Packet Time Interval
Description| Data rate in sec at which emergency packet will be sent to server
Parameter ID| EPTI
SET Command| #1234#SET: EPTI #60;
GET Command| #1234#GET: EPTI #
CLR Command| #1234#CLR: EPTI #

11|
---|---
Device Parameter| Emergency Mode Timeout Duration
Description| Time in sec after which emergency mode will be off automatically
Parameter ID| EMTD
SET Command| #1234#SET: EMTD #120;
GET Command| #1234#GET: EMTD #
CLR Command| #1234#CLR: EMTD #

12|
---|---
Device Parameter| Over Speed Limit
Description| Over speed limit in km/hr
Parameter ID| OSL
SET Command| #1234#SET: OSL #90;
GET Command| #1234#GET: OSL #
CLR Command| #1234#CLR: OSL #

13|
---|---
Device Parameter| Harsh Acceleration Limit
Description| Threshold for harsh acceleration in g
Parameter ID| HAL
SET Command| #1234#SET: HAL #20;
GET Command| #1234#GET: HAL #
CLR Command| #1234#CLR: HAL #

14|
---|---
Device Parameter| Harsh Breaking Limit
Description| Threshold for harsh breaking in g
Parameter ID| HBL
SET Command| #1234#SET: HBL #20;
GET Command| #1234#GET: HBL #
CLR Command| #1234#CLR: HBL #

15|
---|---
Device Parameter| Rash Turn Limit
Description| Threshold for rash turn in km/hr
Parameter ID| RTL
SET Command| #1234#SET: RTL #30;
GET Command| #1234#GET: RTL #
CLR Command| #1234#CLR: RTL #

16|
---|---
Device Parameter| IMEI
Description| To get device IMEI number
Parameter ID| IMEI
SET Command| NA
GET Command| #1234#GET: IMEI #
CLR Command| NA

17|
---|---
Device Parameter| Immobilize ON
Description| To Immobilize vehicle engine (Relay at digital output 1 will be ON)
Parameter ID| IMON
Command| #1234# IMON #

18|
---|---
Device Parameter| Immobilize OFF
Description| To mobilize vehicle engine (Relay at digital output 1 will be OFF)
Parameter ID| IMOF
Command| #1234# IMOF #

19|
---|---
Device Parameter| Relay 2 ON
Description| To turn ON Relay at digital output 2
Parameter ID| R2ON
Command| #1234# R2ON #

20|
---|---
Device Parameter| Relay 2 OFF
Description| To turn OFF Relay at digital output 2
Parameter ID| R2OF
Command| #1234# R2OF #

21|
---|---
Device Parameter| Restart Device
Description| To restart device
Parameter ID| RST
Command| #1234# RST #0; (To restart normally)

1234# RST #1; (To erase all logs and restart)

22|
---|---
Device Parameter| Other Parameters
Description| Some useful device parameters
Parameter ID| PAR
Command| #1234# PAR #

23|
---|---
Device Parameter| Device Settings
Description| To get current settings
Parameter ID| GCS
Command| #1234# GCS #

References

• airtelgprs.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>