CADEAU Bk-100 Solar Interaction Wall Lamp Instruction Manual

June 14, 2024
CADEAU

CADEAU Bk-100 Solar Interaction Wall Lamp

Precautions

  1. During the first use of the product, place the product in a place with sufficient sunlight for charging, the product shou Id be used after being charged for several hours.
  2. When the product will not be used for a longtime, please place the product in a place with sufficient sun light, too, the charging time is 1 day. For keeping the function of the battery, you’d better comprehensively charge the product in a place with sufficient sunlight for once a month.
  3. The charging time and charging efficiency of the solar panel may be affected by the weather and the installation position. Considering the conversion rate of solar power generation, if the product is used with good weather, it will gain higher charging efficiency and effectiveness. 9When there’s sunlight and other lights, and if the power switch is off, the LED lamp will not be lightened in day and night.
  4. The solar lamp should be installed in the place with sufficient light to ensure the solar panel will absorb sunlight sufficiently, so that the working hour of the solar lamp will be prolonged.
  5. The angle of the solar lamp and the direction of the light shoul be adjusted to the best position, it is suggested that the best height is 2-3m.
  6. During winter or when the sunshine du ration is short, it is suggested using the solar lamp under mode 1.

Specification

  • Name of product Solar interaction wall lamp
  • Model ZJ-SL 100
  • Output 5.5V,1W
  • Battery capacity 2200mAh
  • Angle of the sensor 120degrees
  • Induction distance 3-5 meters
  • Brightness 1000LM
  • Quantity of LED 100LED

Use method

  1. For charging the built-in battery, please set lamp in the place with direct sunlight

  2. The strong sunlight can be converted into solar energy in a more effective way.

  3. Used in the place where the light is required, such as path, garage and backyard, etc. Within those areas, please place the light in the place where can be easily illuminated by the sunlight.
    Used in the place where the light is required, such as path, garage and backyard, etc. Within those areas, please place the light in the place where can be easily illuminated by the sunlight.

    • Long press for 1s to enter mode 1: Human body induction mode (the lamp will be on when people come, and the lamp will be off after the people have left for 15s)
    • Pattern 2 : Human body interaction + slight light mode (the lamp will be on when people come, the lamp will be slight after the people have left for 15s, and the lamp will be on again when people come)
    • Pattern 3 : Slight light mode (the lamp be slight light all the time no matter there’s any person or not)

Using method

Changan 2 seconds to open the switch

  • Notes: If there’s sunlight or other lights on the solar panel, the lamp will not be on even if the ON/OFF switch has been turned on. During testing, other objective should be used to cover the solar panel, then the lamp will be on after turning on the ON/OFF switch.

CADEAU-Bk-100-Solar-Interaction-Wall-Lamp-FIG-2

  • fix the device ni a fit place with the equipped screws

CADEAU-Bk-100-Solar-Interaction-Wall-Lamp-FIG-3

  • it is recommended to install vertically against the wall 2-3m hi above the ground as picture @shown you cantory terest patal i sided on ny aaconviso will affect the effect of solar charging at daylight

CADEAU-Bk-100-Solar-Interaction-Wall-Lamp-FIG-4

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals