Allwinner T95H Android TV Box User Manual

Table of Contents

Allwinner-T95H-Android-TV-Box-PRODUCT

Power On/ Off and Sleep

Connect the box to the TV with HD cable, connect box to the power adaptor, Connect mouse, air mouse or other input devices with USB port
After the device and cable connected power led turn to blue.
After the device and cable disconnected, Power LED turns off
Under power on mode, press remote control’s power button, device is entering into sleep mode.
Under sleep mode, device will be wake when you press remote controls power button,

Open applications

Use remote control’s arrow keys to choose the wanted program, click OK button to open the selected program
Switch in the applications
Click “My Apps” to view recently used programs, click program icon to switch application arbitrarily

Click icon to view recently used programs, choose one of them by click and hold, drag it to blank area to close the application
This function only operated in the condition of Mouse mode.

Back To Home Screen

Read External Storage Data

Read U Disk
Insert U flash disk or removable hard disk into USB port in the status of power on, icon USB appears in top left corner of the desktop, open “FileBrowser”, the identified USB(A:) will appear under “Local Disk”, U disk’s operation is available now.

Read TF card

Insert TF card into the device in the status of power on, when icon appears in top left corner of the desktop, open “FileBrowser”, the identified External Storage Card will appear under “Local Disk”, TF card’s operation is available now.

WIFI Function

Home Screen → Settings Network Select “Wi-Fi” to open WIFI function Choose hotspot Input Password > Connect to the network

Ethernet Function

Operations on the box :

Home Screen → Settings Other More Setting Portable hotspot → Select Portable Wi-Fi hotspot”
Select “Set up Wi-Fi hotspot” to set up “Network SSID”, “Security” “Password” parameters
Ensure connected to the wired network, the box can be used as wireless AP to support more wireless devices access in the family

The Step that how to reflash the box

Uncompress the downloaded firmware(ROM) to the root of and SD/TF card(format your card first).
Insert the SD Card into powered-off Box (power cable not plugged in) with no external USB storage attached.
Using a toothpick, insert into the AV port of Box, press and hold the hidden button while plugging power in.Do not release until you see the screen of Robert Logo.
Update will run automatically. When it is done then choose “Reboot”. You can disregard any errors that display after the update, they are not relevant to your device.
When system has rebooted then you should first check to ensure wifi is working by going to Settings->Wi-Fi. Turn on the wiff if it’s off and you should be able to connect.

Read User Manual Online (PDF format)