Kingspan KIAU0064 Kooltherm Insulation Installation Guide
- June 15, 2024
- Kingspan
Table of Contents
INSTALLATION GUIDE
Kingspan Kooltherm K3 Insulation
Your Ceiling Specialist
Every material. One source.
PARTNERING WITH THE WORLD’S LEADING CEILING MANUFACTURERS
Great design is in the detail, and the details are our speciality. We offer
the broadest range of premium products from a single source. Our proprietary
systems provide the platform for your unique design, giving you complete
freedom and customisation to create truly stunning projects.
MBS Architectural can supply any of the products featured in this brochure,
and be your one point of contact throughout the project lifecycle – from
design conception to installation on site.
Reach out to get your hands on product samples, or discuss your project in
more detail – 03 9580 7800 /
hello@mbsarchitectural.com.au
Insulation
Solid Concrete Ground Floor
KOOLTHERM K3 INSTALLATION GUIDE
This document is intended as a guide, and should be used in conjunction with
the detailed Installation Instructions, Handling, Storage and OH&S information
available on our website.
Go to kingspan.com/au/en-au/products-
brands/insulation/insulation
Kooltherm® K3 Floorboard
- Prepare a level and flat substrate, with footings dug and install the damp proof membrane
- Apply tape to joins, ensuring a fully sealed membrane
- Accurately cut to size the Kooltherm K3 Floorboard and install in loose–laid break–bonded pattern, with joins lightly butted
- Overlay insulation boards with a separation layer and 150mm overlaps
- Install reinforcement over separation layer as per engineering requirements
- When required, apply vertical Kingspan XPS Slab Edge Insulation, butt joining boards to cover the entire outer perimeter edge of the slab. For ordering purposes for each Pack of Kingspan Kooltherm K3 generally you will require 1 Pack of Kingspan XPS Slab Edge Insulation
Scan to go to the K3 product page on our website
https://www.kingspan.com/au/en-au/products-brands/insulation/insulation-
boards/kooltherm-k3-floorboard
The information, technical details and fixing instructions etc. included in this literature are given in good faith and apply to uses described. Recommendations for use should be verified as to the suitability and compliance with actual requirements, specifications and any applicable laws and regulations. For other applications or conditions of use, Kingspan Insulation offers a Technical Advisory Service the advice of which should be sought for uses of Kingspan Insulation products that are not specifically described herein. Please check that your copy of the literature is current by contacting us or visiting www.kingspaninsulation.com.au
Every material. One source.
Reach out to our team for support, samples and advice.
03 9580 7800
hello@mbsarchitectural.com.au
VIC | 7 Haymer Court, Braeside 3195
QLD | 13 Pease Court, Bethania 4205
@MBSarchitectural
Documents / Resources
|
Kingspan KIAU0064 Kooltherm
Insulation
[pdf] Installation Guide
KIAU0064 Kooltherm Insulation, KIAU0064, Kooltherm Insulation, Insulation
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>