UNiKA PD Series Power Conditioner User Manual

UNiKA PD Series Power Conditioner

INTRODUCTION

We congratulate you on choosing UNiKA PD Series power conditioner. This series is designed for easy use and incorporate the latest advances in power technology, along with useful and innovative features. Please read all instructions carefully before operating.

FRONT PANEL

1. Rack Mounting Ears – Two front panel mounting holes are provided on each mounting ear.

2. Rear light ON/OFF switch for gooseneck lamp – This switch controls to turn ON or turn OFF the rear light.

3. Front light On/OFF switch for 2 pull-out LED light pipes – This switch controls to turn ON or turn OFF the front 2 pull-out LED light pipes.

4. Hour and Minute buttons for time set up – These buttons enable to set-up hour and minute which are shown in the LCD screen.

5. Two front panel pull-out LED light pipes – These retractable LED light pipes helps users to operate in a dark environment easily and more convenient.

6. LCD digital voltmeter/ammeters/system clock – This LCD indicates voltage, time and current for users easily to control them properly.

7. Front panel resettable circuit breaker – This reset button is used to reset the breaker.

8. Unstitched front panel convenience outlet – This outlet keeps power that is
   always ON.

9. AC power illuminated switch – The switch is used to turn ON or turn OFF the 8 rear panel outlets.

10. Power Output (CH9~CH11) All the PD Series with the same rear panel as below:
    

11. AC Power Cord – Plug this cable into a standard 110V or 220V wall outlet. Be sure that the supplied voltage in your area matches the unit’s required voltage. Never plug your power conditioner into a wall outlet that does not match its required voltage which helps to avoid serious damage may occurred on the unit.

12. XLR lamp connector – This is used to connect the detachable gooseneck lamp.
    (The gooseneck lamp is an optional accessory up to customer’s demand, the standard product doesn’t include this lamp.)

13. Power Output (CH1~CH8) – For CH6~CH8, 3 outlets with wall wart spacing.

FEATURES

All PD series models (PD-1/2/3)

• 8 rear panel outlets and 1 unswitched front panel convenience outlet.
• 3 outlets with wall wart spacing
• Total power capacity of 1800 watts
• Surge and spike protection
• Rear XLR lamp connector for gooseneck lamp detachable
• Front panel resettable circuit breaker and power illuminated switch

For PD-1

• 3 additional front panel outlets (total 11 switched outlets, 1 unswitched outlet)

For PD-2

• LCD digital voltmeter/ammeters/system clock
• Hour and Minute buttons for time set up

For PD-3

• LCD digital voltmeter/ammeters/system clock
• Hour and Minute buttons for time set up
• 2 front panel pull-out LED light pipes with front LED on/off switch
• Rear light on/off switch for gooseneck lamp

OPERATION

MAXIMUM LOAD

The eight circuit breaker-protected outlets are rated at 15 amps total, which is equivalent to 1800 watts at 120 volts. If the total load exceeds 15 amps, the circuit breaker will trip, cutting off power to your rack. If this happens, reduce the load by unplugging one or more units from the unit, then push the circuit breaker button in to reset it.

LAMPS

The PD series power conditioner with easily pull-out LED light pipes (PD-3 only) and may be aimed to provide the best illumination for your equipment. You should set the front rack lights switch to the OFF position if not using the lights for an extended period of time.

AC POWER SWITCH

The PD series power conditioners have a master AC POWER switch for the rear outlets.
This switch glows when the unit is on.

WARNINGS

1. All operating instructions should be read before using this equipment.
2. To prevent the risk of electrical shock, do not remove the cover or the back. There are no user serviceable parts inside.
3. Do not expose this unit to rain or moisture or to heat sources such as radiators, stoves, or other items that generate excessive heat.
4. This unit should be cleaned only with a damp cloth. Do not get moisture inside the unit.
5. When moving this equipment, it should be placed in its original carton and packing, to reduce the risk of damage in transit.

SPECIFICATIONS

| PD -1| PD- 2| PD- 3
---|---|---|---
Total Power Capacity| 1800watts| 1800watts| 1800watts
Maximum Output Current| 15amps| 15amps| 15amps
Power Outlets| 8 Rear Panel Outlets,
3 Front Panel Outlets and
1 Front Panel Unstitched Outlet| 8 Rear Panel Outlets and
1 Front Panel Unstitched Outlet| 8 Rear Panel Outlets and
1 Front Panel Unstitched Outlet
Power Switch| Front Panel Power On/Off Illuminated Switch| Front Panel Power On/Off Illuminated Switch| Front Panel Power On/Off Illuminated Switch,
Rear Light On/Off Switch and
Front LED On/Off Switch
Circuit Breaker| Front Panel Resettable Breaker| Front Panel Resettable Breaker| Front Panel Resettable Breaker
Filtering| Advanced Power Filtering| Advanced Power Filtering| Advanced Power Filtering
Protection Circuit| Surge & Spike Protection| Surge & Spike Protection| Surge & Spike Protection
Construction| Steel Chassis| Steel Chassis| Steel Chassis
Light Pipes| X| X| 2 Front Pull-Out, Shock Mounted
Metering| X| LCD Digital Display
Input Voltage, Current & Time| LCD Digital Display
Input Voltage, Current & Time

XLR Connector

| Rear Rack Lamp 12V/420mA Max (Lamp Not Included)| Rear Rack Lamp 12V/420mA Max (Lamp Not Included)| Rear Rack Lamp 12V/420mA Max (Lamp Not Included)
Dimensions (H×W×D)| 44 x 483 x 284mm| 44 x 483 x 284mm| 44 x 483 x 284mm
Weight| 3.3kg| 3.8kg| 3.9kg
Rack Space| 1U| 1U| 1U

Customer Support

www.unika.com.tw
6F, No.168, Xin-Hu 2nd Rd.
Nei-Hu District, Taipei City. 11494.
Taiwan, Republic of China.
+886 2 27933017
+886 2 27928264
unika@unika.com.tw

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>