ATEM POWER AP120SG-FIX Shingled Bifacial Solar Panel Kit User Manual
- June 13, 2024
- ATEM POWER
Table of Contents
AP120SG-FIX Shingled
Bifacial Solar Panel Kit
User Manual
MODEL NO.: AP120SG-FIX / AP200SG-FIX
V1.1
ABOUT US
ATEM POWER, born in June 2017, as a synonym for exciting outdoor experience,
is an Australian company with dedication and passion for the R&D of high
quality products in the field of renewable energy products, batteries and
related accessories.
Since the company was founded, we have committed to innovation that aims to
make your life infinitely more convenient. And the belief in our conviction
for quality and commitment allows us to innovate in developing products that
are optimally tailored to the needs of our amazing customers.
We engineer and supply solar products for homes, 4x4s, recreational vehicles
and virtually any application you can think of. And we also develop reliable,
high performing deep-cycled batteries and lithium batteries for standby or
daily power needs. Accessories include battery chargers and inverters that are
ideal for RV’s, commercial vehicles, boats, yachts and many more applications!
At ATEM POWER, we stay true to our DNA by prioritizing technological
innovation designed to improve our products and striving to provide excellent
customer care. Because we are motivated to explore the limits of solar power!
WARNINGS & SAFETY INFORMATION
DO NOT operate monocrystalline solar panels UNLESS YOU HAVE READ AND UNDERSTOOD THIS MANUAL and the panel should be installed as per these installation instructions. ATEM POWER recommends that the panel be installed by a suitably qualified person.
- Please bear in mind that the solar panel should be kept away from liquids and chemical solvents.
- Never place your solar panel near fire or flammable materials.
- DO NOT immerse the solar panel in water or wet it.
- Any modifications to the product will void the warranty.
- You should never disassemble, bend, hit or step on your solar panel. Handle and install your solar panel with care, otherwise cells and wiring may be damaged, which can cause short circuit, local overheating and decrease in efficiency.
- Ensure nothing sharp or heavy could potentially break or damage the solar panel during transport or storage.
- DO NOT connect the solar panel directly to a battery.
- Never touch terminals when the panel is exposed to light or during the installation. Use insulating gloves and properly isolated tools.
- DO NOT use mirrors or other devices to artificially concentrate sunlight on the panel.
- Remove any shades (such as shades from weeds, trees, buildings, etc.) which cover your solar panel while it is working.
- You must not use fabrics or other stuff to directly cover the whole or part of the surface of the product while it is working.
- Children, adults with reduced physical or mental abilities, or those who are under the influence of drugs or alcohol are not allowed to use this product.
- This solar panel is not intended to charge non-rechargeable batteries, which may cause injuries to the user or damage the panel and the controller.
- DO NOT disassemble the unit or remove any attached components. Incorrect reassembly may result in a risk of fire or electric shock.
- DO NOT operate the unit if it has been smashed, pierced, or otherwise damaged in any way.
- Please use a wet sponge or cloth to clean the unit as necessary. A mild, non-abrasive cleaning agent can be used to remove grime and dirt.
- This unit is not intended for commercial use.
CAUTION
Be aware of shading that can occur as a result of roof mounted accessories on your caravan or motorhome. Shading sections of your solar panels will significantly reduce your solar panels performance. Care must be taken to avoid the possibility of shading as much as possible during the installation process.
PACKAGE LIST
1 PC(s) ATEM POWER Shingled Solar Panel
TECHNICAL SPECIFICATION
| MODEL NO.: | AP120SG-FIX | AP200SG-FIX |
|---|---|---|
| Panel Size: | 125045030mm | 115088030mm |
| Wire Size: | 2.5mm²; 0.7m Long | 4mm²; 0.9m Long |
| --- | --- | --- |
| Cell Type: | Shingled Module Grade A Monocrystalline Cell | |
| Max. Power(PM): | 120W | 200W |
| Open-Circuit Voltage(VOC): | 23.56V | 22.36V |
| Short-Circuit Current(ISC): | 6.47A | 11.37A |
| Max. Power Voltage(VMP): | 19.64V | 18.64V |
| Max. Power Current(IMP): | 6.1A | 10.72A |
| Max. System Voltage: | 500V | |
| Max. Series Fuse Rating: | 15A | |
| Power Tolerance: | ±3% | |
| Operating Temperature Range: | – 40°C ~ 80°C | |
| Waterproof rating: | IP68 | |
| Connector Type: | MC 4 |
Certifications:
ROUNTINE MAINTENANCE
- Regularly inspect your solar panels and make sure its surface is free from dust, dirt, and other debris.
- Clean with a wet cloth or glass cleaner if necessary.
- Make sure that all structural components and electrical connections are secure and clean.
- Check and replace damaged components if necessary.
TROUBLESHOOTING
| PROBLEM | CAUSE | SOLUTION |
|---|
Solar panel doesn’t work despite sufficient sunlight
| Loose connection| Reconnect
Bad soldering of wires inside the junction box| Contact us
Low power output| Loose connection| Reconnect
Wrong tilt angle| Adjust the angle to capture direct sunlight.
Shadow| Remove any shadow covering the panel
Accumulation of dust| Clean, best on a regular basis
High operating temperature| Ensure sufficient air circulation beneath the
panel
WARRANTY
ATEM POWER (“Manufacturer”) warrants, to the original purchaser, (“User”) that
its solar panel, if purchased from manufacturer or an authorized distributor
or dealer, will be free of defects in material and/or workmanship under normal
application, installation, use and maintenance conditions from the date sold
and for the duration (the “Warranty Period”) of 5 YEARS. Within the Warranty
Period, subject to the exclusions listed below, the Manufacturer will repair,
replace the solar panel or provide you with a refund at our discretion, if the
unit in question are determined to be defective in material or workmanship. If
the Manufacturer deems the solar panel to be not repairable, a new, similar
panel will be offered, or a refund will be issued. This Limited Warranty is to
the original purchaser of the solar panel and is not transferable to any other
person or entity.
EXCLUSIONS :
This warranty does not cover defects that are caused by normal wear and tear,
inadequate maintenance, transportation, storage or faulty repair, misuse,
neglect, accident or abuse, failure to observe installation instructions or
improper installation. It is recommended that the installation should be
performed by suitably qualified technicians or the warranty will be voided.
For further clarity, this warranty is also void if the solar panel:
- is used for applications other than which it was designed and intended for,
- is not properly installed in accordance with the user manual,
- is damaged due to the non-observance of any of the instructions supplied by ATEM POWER, or defects
- resulting from any action of the purchaser including but not limited to mishandling, operation outside of design limits, or unauthorized modification,
- is disassembled, altered, or repaired by someone other than an authorized Manufacturer’s agent,
- has been subject to adverse weather, extreme temperature, or physical damage,
- has been damaged by force majeure (e.g. flash of lightning, overvoltage, storm, fire),
- selected by the user is not of the correct size or specification for the intended application,
CLAIMS:
Request return authorization. No returns will be credited without an
authorization. In the case of returned products, Manufacturer’s exclusive
liability for breach of any warranty on the product shall be to replace the
solar panel within the warranty period in accordance with the terms of this
limited warranty. In no event shall Manufacturer be liable for any loss or
damages of any other kind, whether direct, incidental, consequential including
lost profits, exemplary, special or otherwise, including any lost profits or
removal, shipping, or installation expenses.
For more information, please visit https://atempower.com/