SINBO SJ 3143 Solid Fruit Juicer User Manual

SINBO SJ 3143 Solid Fruit Juicer

Please read all instructions carefully before starting to use your appliance.

PARTS DESCRIPTION

Names and Locations of Main Components

• 1. Pusher cover
• 2. Pusher
• 3. Transparent upper cover
• 4. Juice filter
• 5. Pulp container
• 6. Juice spout
• 7. Jug cover
• 8. Foam separator
• 9. Jug
• 10. Non-slip base
• 11. Power Cord
• 12. Body
• 13. Lock latch

Technical Specifications

• AC230V
• 50Hz
• 1000W

Features

1. It has a delicate, simple, and beautiful design thanks to its combined structure; it is easy to operate and clean.
2. High-speed motor with overheating protection; high efficiency, economy in terms of time and power; long motor service life.
3. A safety lock device is used for switching to ensure safety and reliability during operation.
4. Juice spout design with sealing function

Warnings Before Use

1. This appliance is equipped with a safety device; the motor does not operate and secures the safety of the user when the handle is not seated on the cover or when the blade base is not pressed.
2. While removing or installing the components of the juicer, press the upper part of the feeding chute on the cover with your hand and push the handle inside to slide it inside or outside of the cover housing.
3. To remove the juice filter, remove the cover and pulp container first; then rotate the center ring up to 30 degrees while holding the juice spout by your hand and move it upwards; the filter shall be detached from the wheel automatically.
4. Check whether your power source is compatible with the rated voltage of the appliance before using the appliance to prevent damage.
5. Clean all detachable components (Refer to “Maintenance and Cleaning”).
6. Please follow the “Names and Locations of Main Components” diagram carefully while installing the components.
7. Please read the “Warnings” section carefully before starting to use your appliance.

Juicing

1. Ensure that the switch on your appliance is off before using your appliance. Thus, it may be prevented that the appliance starts to operate when the installation of components is not completed; and thus unnecessary damage to the appliance and injury to persons may be prevented.
2. Before starting to juice, ensure that the juice filter and wheel are engaged to their seats and that there is no harsh contact between the blade filter and the transparent cover. Place the transparent cover, insert the handle into the cover housing, and then operate the appliance.
3. Before operation, bring the juice spout to the sealing position to prevent the juice from overflowing and soiling the table after turning on the appliance
4. Note: The force you apply while pushing the food with the pusher shall be equal and indirect; pushing force shall not exceed 1 kg and force shall not be applied abruptly; otherwise juicing efficiency may be reduced.

Operating Period

This appliance is designed with a rocker switch for a power level of 0 / I / II (0 for stopping, I: less power, II: higher power). Select a higher power position for juicing. Stop for 1 minute after operating for 1 minute; then operate again. After performing the operation above 3 times, stop the appliance for 15 minutes and do not operate until it is cooled. This would increase the service life of the appliance and it would operate more efficiently.

Precautions

1. Place the appliance on a fixed and level counter before starting to operate. Operate as described above.
2. Before starting to juice, ensure that the juice filter and wheel are engaged to their seats and that there is no harsh contact between the blade filter and the transparent cover. Place the transparent cover, insert the handle into the cover housing, and then operate the appliance.
3. Before the initial operation, the motor shall operate in phase, which may cause a strange smell and sparks; this is normal. The phenomena described above shall disappear when the motor is operated for some time.
4. Ensure that not much juice and pulp is left in the center housing and in the pulp container while juicing. If they are filled, please turn off the appliance, clean the components, and then use the appliance again.
5. Do not open the container cover during operation. Do not insert your hand or any wire from the feeding chute while the appliance is on; otherwise, accidents with great damage may occur and the appliance may be damaged.
6. A protective device against excessive heat is installed in the motor to increase the service life of this appliance. If the motor is overloaded or operated for a long period of time and exceeds the warning temperature, power to the appliance shall be cut off automatically. When the motor is stopped, unplug the appliance, wait for the motor to cool down (about 30 minutes), then operate again.
7. It is forbidden to disinfectate the component with disinfection cabinets that operate at high temperatures or by steam/boiling.
8. Do not leave the appliance unattended during operation and never let children use this appliance.
9. After the operation, do not pour the food out without unplugging the appliance.
10. The blades are very sharp. To prevent any risk, please put the blades under running water to clean them, do not wash your hands.
11. This appliance shall not be used for purposes other than its intended purpose.
12. When the power cord is damaged, it shall be replaced by the manufacturer or the authorized dealer or equivalent persons to prevent any risk. In case of a fault, do not attempt to disassemble the appliance by yourself. Please contact our maintenance center or after-sales service center.
13. This appliance is for use in the home and similar environments:
    • personnel kitchens in stores, offices, or other work environments;
    • ranches;
    • customers in hotels, motels, or other accommodation units;
    • bed and breakfast environments.
14. The appliance is not designed to be operated by an external timer or a separate remote control system.
15. This appliance can be operated by children of 8 years and above, people with limited physical, auditory, and cognitive skills, or people with a lack of experience and knowledge as long as they are under supervision or are provided instructions regarding the operation of the appliance. Children aged lower than 8 or unattended children should not perform cleaning or maintenance of the appliance.
16. Keep the appliance and its cable from the reach of children aged lower than 8.

Cleaning and Maintenance

1. You shall keep the motor dry and clean as this appliance will be used frequently.
2. If you will not be using the appliance for a long period of time, please keep the appliance in a dry and well-ventilated place to protect the motor against humidity and corrosion.
3. Do not wash the main appliance. Wipe with a wet cloth to clean it. Other components such as the pusher, center housing, pulp container, juice spout, etc. may be washed directly with water.

Warranty

Dear customer! We express our gratitude for your choice and guarantee the high quality and flawless operation of the product you have purchased when the rules of its operation are followed.

The warranty period for all products is 12 months from the date of purchase. With this warranty certificate, the Manufacturer confirms the serviceability of the product and undertakes to provide free repairs for any malfunctions that occur due to the manufacturer’s fault.

• Warranty repairs can be performed at any authorized service center in Russia.

Warranty conditions:

• In case of the need for warranty service, information about authorized service centers can be obtained on the website www.sinbo-russia.ru.
• Warranty service may be denied in the case of:
  • Violation of consumer operating or transportation rules
  • Professional use
  • Damage caused by domestic animals, rodents, and household insects
  • Signs of self-repair
  • Damage caused by force majeure or third parties

I agree with the conditions, and I have no claims regarding the appearance and completeness. (Customer’s Signature)

Manufacturer: DEIMA ELEKTROMEKANIK URUNLER INSAAT SPOR MALZEMELERI MALAT SANAYI VE TICARET ANONIM SIRKETT Jihangir M., Gyuverdjin D, No4, Avdjilar, Istanbul, Turkey

Importer in the Russian Federation: Limited Liability Company “Haskell” 119192, Moscow, Michurinsky Avenue, Building 11, Building 4, Room III, Office 4; TIN 7719269331; OGRN 14574070

• Country of manufacture: Turkey
• Warranty period: 12 months
• Date of manufacture: 11-2017

WARRANTY TERMS

1. The warranty period begins on the date of product delivery and lasts for 2 years.
2. The entire product, including all its parts, is covered by the warranty.
3. In the event of detecting a defect in the product, the consumer can exercise their rights as stated in Article 11 of Law No. 6502 on the Protection of the Consumer: a. Right to withdraw from the contract b. Right to request a discount from the sales price c. Right to request free repair d. Right to request the replacement of the defective product with an equivalent product
4. If the consumer chooses the right to free repair, the seller is obliged to repair the product without demanding any fees for labor, replacement parts, or any other charges. The consumer can also use the right to free repair against the manufacturer or importer. The seller, manufacturer, and importer are jointly responsible for the consumer’s exercise of this right.
5. If the product malfunctions again within the warranty period or the maximum repair period is exceeded, or if it is determined by a report from the authorized service station, the seller must, at the consumer’s request, provide a refund, a discount in proportion to the defect, or if possible, replace the product with an equivalent one. The seller cannot refuse this request. In case of non-fulfillment of this request, the seller, manufacturer, and importer are jointly responsible.
6. The maximum repair time for the product is 20 business days. This period starts on the date of notification of the product’s malfunction to the authorized service station or the seller if this is done within the warranty period, or from the date of delivery of the product to the authorized service station if it is done outside the warranty period. If the product’s malfunction cannot be resolved within 10 business days, the manufacturer or importer must, until the repair is completed, allocate a similar product with the same features for the consumer’s use. In case of a malfunction occurring within the warranty period, the time spent on repair is added to the warranty period.
7. Defects arising from misuse of the product, contrary to the instructions in the user manual, are not covered by the warranty.
8. Information about the addresses of authorized service stations and other relevant information can be obtained from our phone number 0850 811 65 65, accessible from anywhere in Turkey.
9. The consumer can apply to the Consumer Arbitration Committee or the Consumer Court at the place where they reside or where the consumer transaction is concluded regarding any disputes that may arise from the exercise of the rights arising from the guarantee.
10. In case the Warranty Certificate is not provided by the seller, the consumer can apply to the Ministry of Customs and Trade, Consumer Protection, and Market Surveillance General Directorate. EXCLUSIONS FROM THE WARRANTY COVERAGE (USER ERRORS):
11. Malfunctions occur after the expiration of the legal warranty period.
12. Malfunctions caused by incorrect use by the end-user (if not used as shown in the user manual).
13. Malfunctions that occur in relation to the use of other accessories.
14. Changes or damages not caused by the manufacturer, for example, if the product is opened by unauthorized repair shops.
15. All malfunctions arising from electricity and phone networks, such as power outages, voltage fluctuations, etc.
16. Any intervention made to the product outside of authorized service stations is prohibited.
17. Damaging the warranty label on the product.
18. Damage to the external surface of the product such as cracks, scratches, etc.
19. Malfunctions caused by falls, impacts, etc.
20. Malfunctions occur in dusty, humid, extremely hot, or cold environments.
21. Malfunctions are caused by natural disasters such as floods, fires, earthquakes, lightning strikes, etc.
22. Electrostatic damages to the products.
23. Damages during hand delivery/shipping caused by improper packaging are not covered by the warranty. With this contract, the parties agree to fully fulfill their responsibilities and obligations arising from Law No. 6502 on the Protection of the Consumer and the Regulation on After-Sales Services for Industry and Trade Products issued under this law. MANUFACTURER FIRM: DEIMA ELEKTROMEKANIK ÜRÜNLER INSAAT SPOR MALZEMELERI IMALAT SAN. VE www.sinbo.com – info@sinbo.com.tr

Frequently Asked Questions

How do I clean my SINBO SJ 3143 Solid Fruit Juicer?

To clean your juicer, first ensure it is unplugged. Then disassemble the removable components like the juice filter, pulp container, and juice spout. These components can be washed directly with water. Wipe the main appliance with a wet cloth, but do not wash it. Make sure to keep the motor dry and clean as it's used frequently. For the blades, simply put them under running water for cleaning, avoiding washing by hand.

How long is the warranty for my SINBO SJ 3143 Solid Fruit Juicer?

The warranty period for all products is 12 months from the date of purchase. During this period, the manufacturer provides free repairs for any malfunctions due to manufacturing faults. Make sure to keep your purchase receipt and the warranty certificate.

Can children use the SINBO SJ 3143 Solid Fruit Juicer?

Yes, this appliance can be operated by children aged 8 years and above, individuals with limited physical, auditory, and cognitive skills, or those lacking experience, as long as they are supervised or provided with instructions. Children under 8 or unattended children should not be involved in cleaning or maintaining the appliance.

How can I avoid accidents while using the juicer?

Ensure that the switch on your appliance is off before using it. Always check that the juice filter and wheel are properly engaged, and there's no harsh contact between the blade filter and the transparent cover. Also, never open the container cover during operation, and never insert your hand or any objects into the feeding chute while the appliance is on. These precautions will help prevent accidents and damage to the appliance.

Can I use my SINBO SJ 3143 Solid Fruit Juicer for professional purposes?

No, this juicer is intended for home and similar environments. It should not be used for professional purposes. If you have any further questions or concerns, feel free to contact the manufacturer or authorized service centers for assistance.

Can I operate the juicer with an external timer or remote control system?

No, the appliance is not designed to be operated with an external timer or a separate remote control system. Use it as described in the user manual.

What should I do if I suspect a defect in my product?

If you detect a defect, refer to Article 11 of Law No. 6502 on Consumer Protection. You have several rights, such as the right to withdraw from the contract, request a discount, request free repair, or request a replacement. Please contact the seller, manufacturer, or importer for assistance.

How do I store my SINBO SJ 3143 Solid Fruit Juicer when not in use?

If you're not using the juicer for an extended period, store it in a dry and well-ventilated place to protect the motor against humidity and corrosion. Keep the motor dry and clean as this appliance is used frequently.

What do I do if my appliance overheats?

The appliance has a protective device against excessive heat to increase its service life. If the motor overheats due to an overload or long operation, it will automatically cut off power. When this happens, unplug the appliance, wait for the motor to cool down (about 30 minutes), and then operate it again.

What do I do if my power cord is damaged?

If the power cord is damaged, it should be replaced by the manufacturer, an authorized dealer, or equivalent professionals to avoid risks. Do not attempt to disassemble the appliance by yourself if a fault occurs; contact the maintenance center or after-sales service center for assistance.

How do I avoid the appliance overheating during operation?

The appliance is designed with a rocker switch that has power levels 0 / I / II (0 for stopping, I for lower power, and II for higher power). Select a higher power position when juicing, and operate for 1 minute, then stop for 1 minute. After doing this cycle three times, let the appliance rest for 15 minutes before further operation. This will help increase the service life and efficiency of the appliance.

Can I use the SINBO SJ 3143 Solid Fruit Juicer in a professional kitchen?

No, this juicer is intended for home and similar environments. It should not be used in professional kitchens, stores, offices, or other work environments. It's designed for home use.

Download This PDF Link:SINBO SJ 3143 Solid Fruit Juicer User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>