TDC USA INC 22589 5pc Wicker Patio Bistro Bar Set Instruction Manual
- June 4, 2024
- TDC USA INC
Table of Contents
Wicker Patio
Bistro Bar Set
Assembly Instructions
Made in Vietnam
The owner’s manual contains important safety information as well as assembly,
use, and maintenance instructions. Keep the packaging and bags away from
children and dispose of all packaging properly before use. Keep this manual
for future reference.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
We will be happy to correct any problems that you may have or answer any of
your questions regarding the purchase of this product. Please contact us at
our Toll-Free customer service number
1-800-599-8898 for any assistance and
replacement parts. Thank You.
WARNING!
- Keep all children and pets away from the assembly area. Children and pets should be supervised when they are in the area of product construction.
- Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be.
- Please read all the instructions and warnings before assembling. In order to make the whole product adjust to the best, please install all the screws on the product and tighten all the screws after adjusting the product which can stand on the floor even. Not intended for commercial use.
- Check all bolts for tightness before use.
- IMPORTANT – check and tighten bolts often to keep them secure
- CHOKING HAZARD-Small parts. Not suitable for children under 36 months. The product contains small parts, that keep children away when assembling.
- ADULT ASSEMBLY REQUIRED.
Always remove protective material and poly bags and dispose before assembly.
Parts
Table Assembly Instructions
Step 1:
Carefully remove a glass from Table Top (A) and set it aside until assembly is
complete. Set Table Top (A) upside down on a soft, non-abrasive surface as
illustrated above. Insert two M6x20 Bolts (AA) with Washers (CC) through
eyelets at the top of each leg (B), and into the bolt-threading found along
the rim of Table Top (A), see Fig. 1.
Step 2:
Insert one M6x30 Bolt (BB) with Washer (CC) through eyelets found on the
inside of Table Ring (C), and into the bolt-threading found at the end of the
horizontal extensions of Legs (B), see Fig. 2. Use Hex Key (EE) to tighten all
bolts left loose throughout the assembly process.
Step 3:
Turn the table right-side up and carefully set the glass in the center of
Table Top (A). The table is now ready to use.
Chair Assembly Instructions
Step 1 :
Insert two M6x40 Bolts (AA) with Washers (CC) through the backend [underneath]
of the seat of Chair Seat (B), and into the bolt-threading found in the center
of Chair Back (A), see Fig. 1. Follow these steps to assemble the opposite
side of Chair Seat (B) to Chair Back (A).
Step 2:
Place Support (C) in between the footrest of Chair Seat (B), and the
horizontal bar near the bottom of the legs of Chair Back (A) as illustrated
above. Insert one M6x15 Bolt (BB) with Washer (CC) through the bracket at the
end of Support (C) into the bolt-threading found underneath the footrest of
Chair Seat (B), see Fig. 2. Insert one M6x15 Bolt (BB) with Washer (CC)
through the bracket at the opposite end of Bottom Support (C), and into the
bolt-threading found underneath the horizontal bar of Chair Back (A). Use Hex
Key (EE) to tighten all bolts left loose throughout the assembly process.
Step 3:
Turn the chair right-side up when finished. Place Seat Cushion (D) onto Chair
Seat (B). Secure the cushion to the chair by connecting the fastening straps
around Chair Back (A), see Fig. 3. Your chair is now ready to be used. Follow
these steps to assemble the remaining three chairs.
Limited Warranty
Please contact our service hotline by phone, email, or fax when needing
assistance with assembly or with faulty parts. This allows us to provide
support in the event of possible operator errors.
All furniture manufactured and sold by TDC USA, Inc. is warranted to the
original purchaser against defects in workmanship and materials. If a product
manufactured by TDC fails during the first year from the date of purchase
under the terms of our limited warranty, TDC will replace the item at no
charge. After one year, it will be the original purchases’ responsibility to
pay for freight and packing. TDC reserves the right, in the case of
discontinued or out-of-production models, to replace them with an item of
similar quality. (Glass breakage is not warranted.)
NOTE: You must retain the original receipt to obtain a warranty!
FRAMES:
Frames are warranted against defects in materials and workmanship from the
date of original purchase. Damage to frames or welds due to commercial use,
improper assembly,
exposure to water and sub-freezing temperatures, and/or abuse are not covered.
FABRIC:
Fabric on cushions, slings, and umbrellas is warranted against separation
at the seams. Fading, mildew, and/or discoloration due to exposure to
elements, chemicals, and spills are not covered.
POWDER COAT AND/OR PAINT:
The finish is warranted against blistering, peeling, or cracking. Fading
resulting from exposure to the elements, chemicals, and spills is not covered.
Scratches and chips due to
normal wear and use are not covered.
FREIGHT & PACKING:
TDC will be responsible for shipping, handling, and packaging charges for
all valid warranty claims.
CARE & MAINTENANCE:
Be careful to never allow water to build up in flames as this will cause
corrosion and freeze damage in cold climates. Wash all frames with a solution
of mild soap and water. Rinse will clean water and dry with a soft absorbent
cloth towel. Frames can be treated with a liquid wax for maximum protection
against UV rays and/or salty damp air. If your set includes cushions, slings,
and/or an umbrella, they may be cleaned be hand with a solution of soap and
water with a clean water rinse.
LIMITED WARRANTY EXCLUSIONS:
- Damage caused by acts of nature
- Wind damage
- Failure caused by unreasonable, unanticipated, or abusive use
- Failure caused by a lack of reasonable and necessary care and maintenance
- Normal fade of fabrics, upholstery, or woven materials
- Glass table tops
- Bursting or cracking of tubing due to exposure to water and freezing temperatures
- Changes in wood color due to the natural aging of the wood
A sales receipt must be provided to validate
1-Year Limited Warranty.
Customer Service:
Monday – Friday • 9:00 am – 5:00 pm
Phone:800-599-8898
Email:support@tdcusainc.com
TDC USA, Inc.
5 Industrial Rd, STE 1
Fairfield, NJ 07004-3017
Wicker Patio
Bistro Bar Set
Dist. by TDC USA, Inc. Fairfield, NJ 07004
©2022 All Rights Reserved. Made in Vietnam.
Item #22589
Questions and Comments
1-800-599-8898 (9 am – 5 pm EST)
www.tdcusainc.com