velleman VM166T 2 Channel Transmitter With LED Light Instruction Manual

velleman VM166T 2 Channel Transmitter With LED Light

Product Information

• Product Name: VM166T
• Description: 2 Channel Transmitter with LED Light
• Compatible Receivers: VM109, VM130, VM151, VM152, VM162, K8057, …

Specifications:

• Power supply: 6V battery type A11 (included)
• Operation frequency : 433MHz
• Compliance: R&TTE compliant (ETS 300-220)
• Dimensions: 46 x 33 x 14mm (1.8 x 1.3 x 0.5)

Features:

• Small bright LED that generates a unique 32-bit code
• LED moment and toggle mode, with auto turn off after 4.5 minutes
• More than 1,000,000,000 unique codes
• Code can be changed for safety purposes
• LED transmit indicator

Certification:
Velleman hereby certifies that the device VM166T meets the essential requirements and all other relevant stipulations of directive ETS 300-220. For the complete conformity declaration, check out: http://www.velleman.be/downloads/doc/ce_VM166T.pdf

Website:www.vellemanprojects.com

Product Usage Instructions

Transmitter Instructions:
The transmitter comes with a factory set default code. For security reasons, we recommend changing this code before learning the transmitter to a receiver.

1. Remove the battery.
2. Briefly press button 3.
3. Insert the battery, minding the polarity.
4. LED 4 starts flashing slowly.
5. Press and hold button 3. LED 4 will briefly flash as long as the button is held.
6. Release the button at any time.
7. LED 4 will flash 3 times to indicate that your unique code has been generated. The unit is now ready for use.

To return to the factory default code:

1. Remove the battery.
2. Briefly press button 2.
3. Insert the battery, minding the polarity.
4. LED 4 starts flashing slowly.
5. Briefly press button 2.
6. LED 4 will flash 5 times to indicate that the unit has been reset to the default code. The unit is now ready for use.

Remarks:

• If you insert the battery and do not wish to change the code, wait until LED 5 stops flashing or briefly press button 1.

Operation of the Built-in Flashlight Function:

• Momentary mode: Press and hold button 3, the LED will turn on until the button is released.
• Toggle mode : Briefly press button 3, the LED will turn on. Press again to turn off.
• Remark: When turned on in toggle mode, the LED will automatically turn off after approximately 4 minutes to extend battery life.

Description

1. Channel 1
2. Channel 2
3. Setup/flashlight’ button
4. Transmit indicator
5. Flashlight LED light
6. 6V Battery

• Velleman hereby certifies that the device VM166T meets the essential requirements and all other relevant stipulations of directive ETS 300-220
• For the complete conformity declaration check out : http://www.velleman.be/downloads/doc/ce_VM166T.pdf

Specifications and features

SPECIFICATIONS

• power supply: 6V battery type A11 (included)
• 433MHz operation
• R &TTE compliant ( ETS 300-220) *
• dimensions: 46 x 33 x 14mm (1.8″ x 1.3″ x 0.5″)

FEATURES

• very small
• bright LED
• generates unique 32-bit code
•  LED moment and toggle mode, with auto turn off after 4.5min ? more than 1,000,000,000 unique codes
• code can be changed for safety purposes
• LED – transmit indicator

Transmitter instructions

The transmitter comes with a factory set default code. For security reasons we recommend to change this code before you learn the transmitter to a receiver.

To change the code to your own unique code:

1. Remove the battery
2. Briefly press button 3
3. Insert the battery. Mind the polarity.
4. Led 4 starts flashing slowly
5. Press and hold button 3. Led 4 will briefly flash as long as the button is held.
6. Release the button at any time.
7. Led 4 will flash 3 times to indicate that your unique code has been generated. Unit is now ready for use.

To return to factory default code:

1. Remove the battery
2. Briefly press button 2
3. Insert the battery. Mind the polarity.
4. Led 4 starts flashing slowly
5. Briefly press button 2
6. Led 4 will flash 5 times to indicate that the unit has been reset to default code. Unit is now ready for use.

Remarks: If you insert the battery and you do not wish to change the code: Wait until led 5 stops flashing OR briefly press button 1

Operation of the built-in flashlight function:
Momentary mode: press and hold button button 3, led will turn on until the button is released.

• Toggle mode: briefly press button 3, led will turn on. Press again to turn off.
• Remark: When turned on in toggle mode, led will automatically turn off after approx. 4 minutes to stretch battery life.

WARRANTY

• This product is guaranteed against defects in components and construction from the moment it is purchased and for a period of TWO YEAR starting from the date of sale.
• This guarantee is only valid if the unit is submitted together with the original purchase invoice. VELLEMAN components Ltd limits its responsibility to the reparation of defects or, as VELLEMAN components Ltd deems necessary, to the replacement or reparation of defective components. Costs and risks connected to the transport, removal or placement of the product, or any other costs directly or indirectly connected to the repair, will not be reimbursed by VELLEMAN components Ltd. VELLEMAN components Ltd will not be held responsible for any damages caused by the malfunctioning of a unit.

SAFETY INSTRUCTIONS

• All repairs should be executed by qualified technicians.
• Avoid the installation of the module in locations with standing or running water or excessive humidity. Indoor use only !
• Handle the module gently and carefully. Dropping it can damage the circuit board.
• Never exceed the protection limit values indicated in the specifications.
• As safety requirement vary, please check with your local authorities.
• Facilitate the operation of the device by familiarising yourself with its adjustments and indications.
• Velleman modules are not suitable for use or as part of life support systems, or systems that might create hazardous situations of kind.

R & TTE Declaration of Conformity

• declare, on ow- own responsibility, that the finished product:
• brand : Velleman Module  trade name 2 channel transmitter with LED light
• type or model : Nr. VM166I
• Extra information : Works with VMI 09, VMI 30, VMl 52, VMl 62 and K8057 receiver constituting the subject of this declaration, conforms with the essential requirements and other relevant stipulations of the R&TTE Directive (1999/5/EC).
• The product conforms to the following norm(s) and/or one or several other normative documents:
• EMC (art. 3.1.b): EIS 300 683 /1995 (EN55022) (m the basis CIEMC DoC : ti!I)

SPECTRUM (art. 3.2) : I-EIS 300-220

Additional information:

• Technical data are available and can be obtained from : VELLEMAN COMPONENTS
• LEGEN HEIRWEG 33 9890 GA VERE – BELGIUM

Name: SANTENS STEPHAN Capacity: R&D MANAGER

VELLEMAN KIT NV
Legen Heirweg 33
9890 Gavere
Belgium Europe
Info : http://www.velleman.be

Modifications and typographical errors reserved HVM166T’1 © Velleman Kit nv Designed in Europe, Printed in Taiwan

References

• Velleman – Wholesaler and developer of electronics
• Details – Own brands – Velleman – Wholesaler and developer of electronics

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>