avide Lighting ABLSBCAB-30WWR Armadura LED Sensor User Manual
- June 13, 2024
- avide Lighting
Table of Contents
avide Lighting ABLSBCAB-30WWR Armadura LED Sensor
Product Information
| Model | Languages |
|---|---|
| ABLSBCAB-30WWR/ABLSBCAB-30WWS | EN, DE, HU, RO, SK, CZ, HR, SI, SRB, PT, LT, |
PL, GR
ABLSBCAB-30WWS-DE/ ABLSBCAB-30WWS-DE| EN, DE
Thank you for choosing AVIDE product
The product has a magnetic attachment with adhesive on both sides. Please use the adhesive to attach the holder in the desired location. For convenience, the product can be easily removed and reattached, making it easier to load.
Disposal of Waste Equipment
Collect and dispose of waste equipment separately as it may contain parts that are hazardous to the environment or human health. Used or discarded equipment can be handed over free of charge at the point of sale or any distributor that sells equipment of the same nature and function. Electronic waste can also be disposed of at a collection point. This helps protect the environment, your community, and your health. If you have any questions, please contact your local waste management association.
Thank you for choosing AVIDE product! Please read the following instructions
carefully before use.
Prior to assembly, check the contents of the kit and its integrity. Do not use
the product in case of damage! Switch off the power supply before
installation! When assembling, make sure that the cables are connected
correctly. Make sure that the arrow on the controller and the arrow on the
strip face each other when connecting. Do not use the LED strip wrapped or
rolled up! Make sure the polarity is correct when inserting the battery.
Disassembly of the AC adapter and controller housing is prohibited and can be
fatal! We do not guarantee the disassembled devices! We do not accept any
liability for non-compliance with the rules of life and accident protection,
or for possible damage resulting from incorrect installation or damage to the
products.
Please read and keep the following instructions before using the product.
Warning
- Make sure that the device has not been damaged during transport! – Do not disassemble the product at home! – Please do not overstretch the adjustable parts of the lamp to avoid injuries – Please do not use the lamp in high temperature or high humidity environments. For use in dry, indoor conditions only
- Please do not look directly into the LED light.
The product contains a battery. Do not expose to extreme temperatures or disassemble the product.
- Please charge the battery before first use using the USB cable provided.
- Use the switch on the product to turn the LEDs on and off.
- There are 3 markings on the switch:
- ON: The product is constantly lit.
- OFF: The product is switched off.
- AUTO: The product will light up when motion is detected using the built-in motion sensor, it is lit for an additional 30 seconds after motion ceases, then it turns off.
- As the battery is draining, the brightness steadily decreases.
- Use the USB cable and 5V USB adaptor included in the package or the USB port on your computer to recharge the battery of the LED light.
- The indicator light will illuminate continuously during charging.
- Once the battery is charged the indicator will turn off.
- Continuously charging the lamp while it is running will significantly reduce battery life.
Fixing
The product contains a magnetic fixing with adhesive on both sides. Use the
adhesive to secure the mount in the desired location. Thanks to its
practicality, the product can be removed and reinserted in one easy movement,
making it easier to recharge the product later.
Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
For technical or warranty support, please contact the authorised representative:
Bramcke GmbH 52353 Düren
An Gut Nazareth 18A Germany
www.bramcke.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>