Tattu TA3200 Dual Smart Charger User Manual
- June 13, 2024
- Tattu
Table of Contents
Tattu TA3200 Dual Smart Charger
To users:
Dear user, thank you for using TATTU products. In order to ensure your safe
and smooth use of the TATTU TA3200 / TA3200HV charger, please read this USER
GUIDE carefully and follow the precautions mentioned.
Contact Us
- United States
- Website: www.genstattu.com
- Contact: +1 925-364-7166
- Email: [email protected]
Safety Instructions
Please read the following instructions carefully for your safety and optimal user experience before using this product:
- Keep the charging ports clean and avoid any contact with metal objects.
- If the charging port comes into contact with liquids or foreign substances, promptly clean it and ensure it remains free of debris. Failure to do so may result in poor connectivity, battery short-circuiting, or charging issues.
- Regularly inspect the charging ports, plugs, and other components before daily use. Do not use alcohol or other flammable substances to clean the charging equipment.
- Always use compatible power plugs, sockets, and power cables. Using a power supply with a higher rating than recommended may lead to device overheating or damage.
- If any abnormalities or warnings occur during the charging process, immediately disconnect the power, verify that the product functions properly, and then resume use if everything is in order.
- Maintain a distance of at least 30cm between the battery and the charger, as well as between multiple batteries, during charging to prevent overheating or potential hazards.
- Charge the device on a flat and cool surface. Avoid charging in enclosed spaces, high temperatures, or unstable environments.
- Once charging is complete, disconnect the charger from the battery and store them in a safe, clean, and cool area.
- Keep the charger away from heat sources at all times, whether in use or idle.
- Do not expose the charger to direct sunlight or rain.
- Use only AC power within the specified voltage range. During charging, keep away from flammable or explosive materials and ensure that someone is present as a precaution.
- Modifying or disassembling the charger is strictly prohibited. Users will be solely responsible for any consequences arising from unauthorized modifica- tions or disassembly.
- Do not place heavy objects or clutter on the charger, and never sit or place weight on it.
- Do not use damaged charging equipment. If repairs or replacements are required, please promptly contact the TATTU customer service center.
Product Overview
The TA3200 / TA3200HV Dual Channel Smart Charger is a versatile charger with
support for charging and storage modes. When connected to TATTU smart
batteries, it automatically detects battery information, eliminating the need
for manual parameter adjustments. It can also work with non-smart batteries by
easily setting the charging current and mode. This product is equipped with
various safety features including temperature protection, overcurrent
protection, overcharge protection, disconnection protection, and fast
balancing. Throughout the charging process, the charger constantly monitors
the battery’s status. Once the battery is fully charged, the charging manager
will automatically stop the charging process.
NOTE
Please double-check the charger model you have purchased. The TA3200 charger
is only compatible with LiPo batteries, whereas the TA3200HV charger is
exclusively meant for LiHV batteries. Never attempt to use the TA3200HV
charger to charge LiPo batteries, as it poses a risk of overcharging.
Parameters
- Model:
- TA3200 (LiPo Version)
- TA3200HV (LiHV Version)
- Input Voltage: AC 100~240V 50/60Hz 15A (Max)
- Output Voltage: DC 15~60V
- Charging Current: Up to 60A
- Discharging Current: Up to 3A
- Maximum Charging Power: 3200W
- Maximum Discharging Power: 70W ×2
- Operating Temperature: 0~60 °C
- Storage Temperature: -20~60°C
- Dimensions: 276×154×216mm
- Weight: Approximately 6kg
- Supported Battery Types and Cell Count:
- TA3200 is compatible with LiPo batteries only, 6-145
- TA3200HV is desianed for LiHV batteries onlv. 6-14S
Structure Overview
- Charging interface A
- Balance charging port A
- Display
- Channel
- Charging current
- Start/Stop
- Mode
- Balance charging port B
- Charging interface B
- AC input
- USB upgrade
- Screw hole for case ground
Operation interface.
Ul introduction
Main interface
On the main interface, simply tap the left button to quickly switch and view
the real-time cell voltage.
Individual cell voltages
In the interface showing individual cell voltages, an upward arrow indicates
the highest voltage among the cells, while a downward arrow indicates the
lowest voltage.
How to use
To begin, connect one end of the power cord to the charger’s power input port and the other end to a power socket. The charger’s screen will display the startup interface. Take note of the charger model shown on the startup interface and ensure you do not use the TA3200HV (high voltage version) for charging LiPo batteries, as it may pose a risk of overcharging. After approximately 3 seconds, the startup interface will automatically transition to the main interface of the charger.
Connect to TATTU smart battery
Once the battery is connected to the charger, if the communication is
successful, the TATTU icon on the main interface will appear in yellow. You
don’t need to manually set the charging current. Simply press the left key to
select the working mode, and then press and hold the right key to initiate
smart charging
Connect to non-smart battery
Ensure that the battery is properly connected to the charger, and make sure to
connect the balance charger as well. Press the up button briefly to select the
appropriate charging current. Then, press the down button to choose the
desired working mode, and finally, press and hold the right button to start
the charging process.
During the charging process, the charging current is relatively high. For
safety purposes, please avoid directly removing the battery. If you need to
remove the battery, please press and hold the right button first to pause the
charging.
Device Settings
On the main interface, press the left button briefly to access the battery voltage display. Then, quickly press the up and down buttons to enter the device settings interface.
Upgrade
- If you need to upgrade the firmware, please use the USB cable provided in the package. Connect one end of the cable to the upgrade port on the charger and the other end to your computer. During the process, it may be necessary to automatically install the USB driver software from the internet. Please follow the steps below:
- Long press the left button on the charger.
- Connect the charger to a power source.
- Release the button after hearing a “beep” sound from the charger.
- Open the upgrade software and select the “Update” option to begin the upgrade process.
- During the upgrade, the charger’s screen will remain black. It is important to avoid unplugging the USB cable or interrupting the power supply, as doing so can cause the upgrade to fail (resulting in the clearing of the original software).
- If needed, you can restart the upgrade by repeating the above steps
- Please note that this upgrade software is compatible with Windows 7/10 operating systems only.
Note: This upgrade software only supports windows 7/10 system.
After sales and warranty
Thank you for purchasing this product. TATTU will do its best to provide you with excellent after-sales service. Please contact the TATTU after-sales service with anyquestions regarding the product.
- TATTU batteries carry a limited manufacturer warranty. Please contact TATTU after sales service with any questions regarding the manufacturer warranty.
- TATTU products carry a warranty period of one year from the original date of purchase. A valid proof of purchase is required for all manufacturer warranty claims.
- If the TATTU product is outside of the warranty period we may at our sole discretion offer a discount good for the purchase of a new similar item.
- The following is not covered by the manufacturer warranty.
- Failure to use correct input voltage
- Failure to follow instruction manual
- Mechanical damage due to external causes
- Disassembly, or modification by the user(modifying original connectors,wires,- components,etc.)
- Use in improper conditions(damage or rust from rain,humidity,etc.)
- Normal wear and tear, dents and scratches
TATTU is not responsible for the use, abuse or misuse of this product. Please pay close attention to all details and use this product correctly. The user shall bear any and all consequences caused by use, misuse and or operation of this product. Grepow INC. shall bear no responsibility for any expense beyond the cost of unit production and reserves the right to amend, edit or modify this document in any way deemed necessary by us with or without prior notice.
ABOUT COMPANY
- Website:
- Contact:
- +1 925-364-7166
- +49 (0)211 93670190
- Email: