Fellowes PS60-2 Paper Shredder User Manual

: June 13, 2024
: Fellowes

Table of Contents

Fellowes PS60-2 Paper Shredder
Product Information
Product Usage Instructions
PRODUCT USAGE GUIDE
IMPORTANT SAFEGUARDS
PARTS OF THE SHREDDER
ASSEMBLY
OPERATION
MAINTENANCE
TROUBLESHOOTING
LIMITED WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fellowes PS60-2 Paper Shredder

Fellowes-PS60-2-Paper-Shredder-product

Product Information

Model: PS60-2, PS60C-2
Shred Type: Strip (PS60-2), Confetti (PS60C-2)
Shred Size: 7/32″ (Strip), 5/32″ x 1-3/8″ (Confetti)
Entry Width: 9″ (230mm)
Recommended Use: 25-50 shredding passes per day
Maximum Running Time: 10-12 min. on / 20 minutes off

Product Usage Instructions

Assemble the shredder head onto the basket according to the assembly instructions provided in the manual.
Remove any large paper clips or foreign objects (except staples and small paper clips) from the paper to be shredded.
Ensure that the power switch is in the OFF position before plugging the shredder into a power supply outlet.
Move the power switch to the AUTO position to activate the auto-start sensor.
To clear the cutting blades, the shredder will run for about 1 second as soon as the paper is inserted into the paper entry.
For safety reasons, always move the power switch to OFF and unplug the shredder when it is unattended or not in use.
Do not attempt to shred paper clips or other hard materials, as this may damage the cutting system and void the manufacturer’s warranty.
Adjust the sheet capacity appropriately if folding paper to fit the paper entry.
Sheet capacity may vary depending on paper weight, humidity, and electrical currents.

Please refer to the product manual for more detailed instructions and safety guidelines.

PLEASE READ AND SAVE THIS MANUAL WITH YOUR ORIGINAL RECEIPT

Customer Service: 1-800-955-0959

PRODUCT USAGE GUIDE

| |
---|---|---
PS60- 2| PS60C- 2
Sheet capacity*:| 12| 7
Shred type:| Strip| Confetti
Shred size:| 7/32″| 5/32″ x1-3/8″
Entry width:| 9″| 9″
Recommended use:| 25-50| shredding passes per day
Maximum running time:| 10-12 min.| on / 20 minutes off

IMPORTANT SAFEGUARDS

Warning:

NEVER insert hands or fingers into paper entry as serious personal injury may result.
THIS MACHINE IS NOT A TOY. Keep children and pets away from the shredder AT ALL TIMES as serious injury may result. Always unplug the shredder when not in use.
Keep loose objects (jewelry, ties, long hair) away from the shredder. These items and others like them may cause serious injury if they accidentally fall into the paper entry.

Caution:

Confetti-cut shredders contain sharp edges on the underside of the machine. Use caution when positioning the shredder head onto the basket.
Do not exceed the recommended sheet capacity.
Do not shred plastic (except credit cards), continuous forms, adhesive labels, transparencies, newsprint, or cardboard.
This personal shredder is intended for paper only. Do not attempt to shred large paper clips or other hard materials (except staples and small paper clips).
Do not place the shredder near or over a heat source or water.
Always turn off and unplug the unit before moving or cleaning and when not in use.
Do not insert aerosol cleaners into or around the shredder. Some agents may combust, causing serious injury.
Never use flammable synthetic oil, petroleum-based, or aerosol lubricants to oil the cutting blades. Some agents may combust, causing serious injury. Use only a recommended oil in a non-aerosol container. See “MAINTENANCE.”
Do not use this product if it or the cord has been damaged in any way.
Do not open the cover for any reason. Doing so can expose you to dangerous voltages and will void your warranty.

Power Cord Care

Place the power cord in an easily accessible position, because it is the main disconnect switch.
Do not place a machine where adults, children, or animals may walk on the cord.
Do not rest anything on the power cord.
If an extension cord is used, be sure that all products plugged into the extension cord do not exceed the extension cord ampere rating.

PARTS OF THE SHREDDER

A. Basket
B. Paper entry
C. Shredder head
D. Power switch
E. LEDs (red and green)
F. Viewer

ASSEMBLY

NOTE:
Model PS60C-2 will operate only when used with the supplied basket. The supplied basket has a built-in safety feature that pre-vents the shredder from operating if used with any other basket or if improperly assembled.

To assemble shredder head onto basket:

CAUTION
Confetti-cut shredders (Model PS60C-2 only) contain sharp edges on the underside of the shredder head. Use caution when positioning the shredder head onto the basket.

Position the shredder head over the basket as shown in Figure 1.
For Model PS60C-2 ONLY: Align the slot on the back of the shredder head with the tab on the inside rear of the basket.
Lower shredder head onto basket (while maintaining tab/slot alignment).

OPERATION

Warning:
This product features an auto-start sensor. This sensor will turn on the cutting blades whenever anything is inserted into the paper entry (while the power switch is in the AUTO position). For the safety of pets and children, we recom-mend always moving the power switch to OFF and unplugging whenever the shredder is unattended or not in use.

Assemble shredder head to basket (see “ASSEMBLY”).
Remove any large paper clips or other foreign objects (except staples and small paper clips) from the paper. If folding paper to fit a paper entry, adjust sheet capacity appropriately.
Caution:
Do not attempt to shred paper clips or other hard materials (except staples and small paper clips) with this machine. Extensive use of paper clips or other hard materials will result in damage to the cutting system and will void the manufacturer’s warranty.
Be sure the power switch is in the OFF (O) position. Plug the shredder into the proper power supply outlet.
Move the power switch to the AUTO (I) position. To clear the cutting blades, the shredder will “run” for about 1 second immediately after switching to AUTO (I). When the unit is turned on and in standby mode (green LED lights), the shredder is ready to be fed paper through the paper entry. (See “TROUBLESHOOTING” if the red LED is lit.)
- Warning: NEVER insert hands or fingers into paper entry as serious personal injury may result.
- Caution: Do not exceed the recommended sheet capacity (see “Product Usage Guide” on page 1).
Slide paper straight into the paper entry until the shredder automatically begins shredding.
The shredder automatically stops when shredding is complete. Continue shredding as desired to a MAXIMUM shredding time of 10-12 minutes. At this time, the machine MUST be allowed to “cool down” for a MINIMUM of 20 minutes. (See the “Cool-Down Cycle” section for more information.) If the shredder jams or shuts off before the maximum shredding time, see the “Clearing a Jam” section for further instructions.
Move the power switch to the OFF (O) position when shredding is complete.
Unplug the power cord from the outlet when the shredder is unattended and not in use.
Look through the viewer to see if the basket is full. If full, lift off the shredder head and empty the basket contents. Replace the shredder head into position on the basket.

Cool-Down Cycle
This shredder is protected with a special safety feature which prevents the motor from overheating with extensive use. When shredding is attempted beyond the machine’s maximum running time, the shredder will automatically shut off its motor until it has cooled to an acceptable operating level. This is normal and the shredder will return to operation after the “cool-down” period. See “Product Usage Guide” (page 1) for maximum running time and related cooling or “off” time.

Clearing a Jam
If the shredder sheet capacity is exceeded or the paper is not put in straight, a jam may result. See “Product Usage Guide” (page 1) for maximum sheet capacity for your shredder. In the case of a jam, the shredder’s red LED will light and the shredder will automatically stop until the jam is cleared.

To clear a jam:

Move the power switch to the REVERSE (R) position. (If the wastebasket is full, empty it before clearing the jam.) The shredder will reverse the paper to clear the jam.
If the shredder jams in reverse, move the power switch to AUTO (I) and allow it to run for about five seconds. If the jam does not clear, move the power switch to REVERSE (R) again and allow to run for about five seconds. Repeat this procedure until the jam is cleared. If necessary, use care to grasp the paper carefully and pull it out to clear the jam.
Once the jam is cleared, move the power switch to AUTO (I) for continued shredding or OFF (O) if shredding is complete.

MAINTENANCE

Confetti cut shredders (Model PS60C-2) require regular (monthly) oil-ing of the cutting blades to maintain proper operation. Failure to oil the blades regularly could result in reduced sheet capacity performance, excessive noise during operation, paper jams, and possibly shredder failure. We recommend using only Powershred Lubricant #35250 (available by contacting Fellowes) or vegetable-based oil (such as corn or canola) in a non-aerosol container with an extension nozzle.

Caution:
Never use flammable synthetic oil, petroleum-based, or aerosol lubricants to oil the cutting blades. Some agents may combust, causing serious injury.

To oil the cutting blades:

From the top of the shredder, squeeze the recommended lubricant across the full width of the blades.
Move the power switch to the AUTO (I) position and allow the blades to run at least 3 seconds.
Move the power switch to the REVERSE (R) position and allow it to run for at least 3 seconds.
Repeat steps 2-3 above at least 3 times.

TROUBLESHOOTING

Shredder will not operate.| a. Shredder is not plugged in.
b. The power switch is in the OFF (O) position. Move the switch to the AUTO (I) position.
c. Shredder is jammed. See the “Clearing a Jam” section.
d. Shredder has exceeded the maximum run time and requires a “cool-down” time. See “Product Usage Guide” (page 1).
e. Shredder is not assembled properly. See “Assembly.”
---|---
The shredder makes a loud squeaking or rubbing noise. (Model PS60C-2 only)| Cutting blades need to be oiled REGULARLY. See the “MAINTENANCE” section.
Shredder suddenly stops while shredding.| a. Shredder has exceeded the maximum run time and requires a “cool-down” time. See “Product Usage Guide” (page 1).
b. The shredder is jammed. See “OPERATION -Clearing a Jam.”
The shredder shreds less than capacity. (Model PS60C-2 only)| Cutting blades need to be oiled REGULARLY. See the “MAINTENANCE” section.
The red LED is lit.| a. Shredder head is not assembled properly (Model PS60C-2 only). See “ASSEM-BLY.”
b. Paper is jammed. See “OPERATION -Clearing a Jam.”
The shredder runs for a few seconds after the paper has cleared the cutters. (Model PS60C-2 only)| This is normal. The shredder runs a few seconds longer than the paper in order to keep the cutters clear of paper particles and reduce the chances of a jam.

LIMITED WARRANTY

Fellowes warrants the cutting cylinders of the machine to be free of defects in material and workmanship for 5 years from the date of purchase by the original consumer. Fellowes warrants all parts of the machine to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling, or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED
IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary from state to state.
For more details or to obtain service under this warranty, please contact Fellowes Customer Service at 1-800-955-0959, Monday through Friday, 8 AM – 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on machines purchased outside the USA, contact the appropriate location listed in the Contact for Service section of this instruction manual.
- Warrantor: Fellowes, Inc.

Contact For Service