HomeSelect 6662 LED Linear Light Instruction Manual

June 13, 2024
HomeSelect

HomeSelect-LOGO

HomeSelect 6662 LED Linear Light

HomeSelect-6662-LED-Linear-Light-PRODUCT

Product Information

The LED Linear Light is a high-quality lighting fixture designed  for both residential and commercial use. It features a sleek and modern design, providing bright and energy-efficient lighting. The light is equipped with a reliable switch and durable wire connections to ensure long-lasting performance. The fixture is easy to install and requires minimal maintenance.

Product Usage Instructions

Troubleshooting:

  • Possible Cause: Power is off.
  • Corrective Action: Make sure the power supply is on.
  • Possible Cause: Faulty switch.
  • Corrective Action: Test or replace the switch.
  • Possible Cause: Faulty wire connection.
  • Corrective Action: Check wiring and wire connections.
  • Possible Cause: Fuse blows or circuit breaker trips when light is turned on.
  • Corrective Action: Check for crossed wires or grounding out of the power wire.

Product Maintenance:

  1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
  2. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

Installation

WARNING: Before installation, turn off the main power at the circuit breaker. Installation must be performed by a qualified licensed electrician.

Tools Required for Installation and Assembly
(not included):

  • Phillips screwdriver
  • Flathead screwdriver
  • Wire cutters
  • Wire strippers
  • Safety goggles
  • Electrical tape

Installation Steps:

  1. Removing the existing fixture:
    • Remove the existing fixture.
  2. Install Fixture Mounting Screws:
    • Install fixture mounting screws (A).
  3. Connecting the wires:
    • Connect the white supply wire to the white fixture wire.
    • Connect the black supply wire to the black fixture wire.
    • Connect the ground supply wire to the ground fixture wire.
    • Use wire nuts to secure all connections.
  4. Installing the ceiling fixture:
    • Tuck the fixture wires into the ceiling box.
    • Install the fixture base (B) onto fixture screws and secure it into slots.
    • Install the magnetic cover plates.

For more detailed information and visual illustrations, please refer to the installation manual available at www.HomeSelects.com.

LED Linear Light Models 6662 – 6664

HomeSelect-6662-LED-Linear-Light-FIG-1

DANGER : Before installation, turn off the main power at the circuit breaker.

WARNING: Installation must be performed by a qualified licensed electrician.

TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY
(not included):

Installation

  1. Removing the existing fixture
    • Remove the existing fixture.HomeSelect-6662-LED-Linear-Light-FIG-3
  2. Install Fixture Mounting Screws
    • Install fixture mounting screws (A)HomeSelect-6662-LED-Linear-Light-FIG-4
  3. Connecting the wires
    • Connect the white supply wire to the white fixture wire.
    • Connect the black supply wire to the black fixture wire.
    • Connect the ground supply wire to the ground fixture wire.
    • Use wire nuts to secure all connections.HomeSelect-6662-LED-Linear-Light-FIG-7
  4. Installing the ceiling fixture
    • Tuck the fixture wires into the ceiling box.HomeSelect-6662-LED-Linear-Light-FIG-5
  5. Installing the ceiling fixture
    • Install the fixture base (B) onto fixture screws and secure it into slots.
    • Install the magnetic cover platesHomeSelect-6662-LED-Linear-Light-FIG-6

TROUBLESHOOTING

Possible Cause| Corrective Action|
---|---|---
The light will not turn on.| 1. Power is off.| 1. Make sure the power supply is on.
2. Faulty switch.| 2. Test or replace the switch.
3. Faulty wire connection.| 3. Check wiring.
The fuse blows or the circuit breaker trips when the light is turned on.| 1. Crossed wires or power wire is grounding out.| 1. Check wire connections.

PRODUCT MAINTENANCE

  1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
  2. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for five (5) years from the date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set up, or used in any way not by the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and especially disclaim any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.

www.HomeSelects.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals