TapWell TW800-200 Towel Warmer Instruction Manual
- June 13, 2024
- Tapwell
Table of Contents
TapWell TW800-200 Towel Warmer
Product Information
Product Name: TW800-200 Towel Warmer
Mounting Instructions: These instructions are for your safety. Please read through them thoroughly prior to handling the product and retain them for future reference.
Content:
- 3x Pre-mounted screws
- 3x Plastic mounts
- 2x Pre-mounted hole template guide
- 1x On/Off-box
Cleaning and Maintenance: Wipe the surface clean with a soft, damp cloth. Never use solvents, abrasives, bleaches, acids, strong detergents, aggressive chemical cleaners, or solvent-type cleaning solutions on the product. On brushed surfaces, wipe in the same direction as the surface lines.
Safety: The product shall always be installed by an authorized electrician. When using electrical appliances, to reduce the risk of fire, electric shock, and injury, one should always follow the basic precautions.
Proper Disposal: This marking indicates that this product should not be disposed of with other household waste in EU countries. To recycle your used device, please use the recycling or collection systems.
How it Works: The towel warmer has a button for operation. Pushing the button once turns it on with a white glow. Pushing twice sets it to a 2-hour timer mode with a subdued white glow. Pushing three times sets it to a 4-hour timer mode with a fainted white glow. Holding the button turns it off.
Recommended Mounting Height:
- TW1500-200: 310.00
- TW1500-85: 310.00
- TW800-200: 310.00
- TW750-85: 310.00
Important Note: The towel warmer should be installed in an appliance box.
Hole Measurements :
- 182.0
- 6.0
- 6.0
- 58.0
- 124.0
Junction Box Location: 74.0, 6.0, 788.5
Separate Pre-mounted Screws and Plastic Mounts: Please refer to the attached template guide for hole measurements.
Silicone: Apply silicone in the holes for the screws and around the hole for the On/Off-box.
Product Usage Instructions
- Ensure the towel warmer is installed by an authorized electrician for safety reasons.
- Clean the surface of the towel warmer with a soft, damp cloth. Do not use solvents, abrasives, bleaches, acids, strong detergents, aggressive chemical cleaners, or solvent-type cleaning solutions.
- To turn on the towel warmer, push the button once. It will emit a white glow.
- To activate the 2-hour timer mode, push the button twice. The towel warmer will emit a subdued white glow.
- To activate the 4-hour timer mode, push the button three times. The towel warmer will emit a fainted white glow.
- To turn off the towel warmer, hold the button.
- Ensure the towel warmer is mounted at the recommended height based on the model.
- Install the towel warmer in an appliance box.
- Refer to the attached template guide for accurate hole measurements.
- Use the pre-mounted screws and plastic mounts provided to secure the towel warmer.
- Apply silicone in the holes for the screws and around the hole for the On/Off-box.
- Dispose of the product properly by using recycling or collection systems, as indicated by the recycling symbol.
Content
You need:
Cleaning and maintenance
Wipe the surface clean with a soft, damp cloth. Never use solvents, abrasives, bleaches, acids, strong detergents, aggressive chemi-cal cleaners or solvent- type cleaning solutions on the product. On brushed surfaces, wipe in the same direction as the surface lines.
Safety
IMPORTANT – the product shall always be installed by authorized
electrician.
When using electrical appliances, to reduce the risk of fire, electric shock,
and injury, one should always follow the basic precautions, which include:
- Read all instructions before using the product.
- This product is hot during use. To avoid burns, do not let your bare skin come into contact with hot surfaces.
- Extreme care should be taken when the product is used near children and leaving it unattended.
- If special precautions need to be taken during the installation of the device, appropriate details should be given.
- Keep the product clean.
- Use the product only as specified in this manual. Using the device other than the manufacturer’s instructions may result in fire, electric shock, or personal injury.
- In order to avoid any hazard, if the power cord is damaged, it must be replaced by the manufacturer, the manufacturer’s service Centre or a similarly licensed person.
Proper disposal of this product
This marking indicates that this product should not be in EU countries. To
recycle your used device, please use the recycling or collection systems.
How it works
Mounting Instruction
Recommended Mounting Height
IMPORTANT – to be installed in appliance box
Hole measurements (also see attached template guide)
Separate pre-mounted screws and plastic mounts
- This product is a dry type heater, it does not contain any liquid.
- Children under the age of 3 should be kept away from the product unless they are under constant supervision.
- Children aged 3 to 8 years may only switch the appliance on or off when it’s placed or installed in its normal operating position if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
IMPORTANT – apply silicone in holes for the screws and around the hole for On/Off-box.