FXTUL-M3 M3 Motorcycle Diagnostic Tool User Manual
- June 13, 2024
- FXTUL
Table of Contents
FXTUL-M3 M3 Motorcycle Diagnostic Tool
www.fxtul.com
sales@fxtul.com
+86-755-2321 6348
PRODUCT OVERVIEW
FXTUL M3 is a handheld motorcycle diagnostic tool for mainstream motorcycle brands and can help technicians diagnose problems faster and make repairs. This tool has functions such as voltage detection, multi-language selec-tion, and unit switching. It has a clear interface and is easy to operate. It is a good helper for motorcycle maintenance.
PRODUCT PICTURE
Functions:
- Diagnose
- Voltage Detection
- Settings
- Help
Button Instructions:
- Short press to select [F1]
- Long press to select [HELP]
- Short press to select [F2]
- Long press to select [F3]
- [ ] Left/Right/Up/Down
- [ ] Back
- [OK] Conf irm
DIAGNOSE
System Diagnosis Features
- Supports scanning, identifi cation and code reading of all systems of the current model, and reports the assembly status of all systems and whether there are fault codes for each system.
- Support to browse the assembly status and fault code description of all systems of the vehicle model.
- Support one-click code clearing of all systems.
- Display data stream with oscillogram.
Functions
- Support engine / ABS / Tire pressure / Anti-theft and other systems
- Read system information
- Read fault code
- Clear fault code
- Read data stream
- Read freeze frame data
- Actuator test
- Service function (including idle speed regulation /throttle position learning, etc.)
OPERATION GUIDELINE
Brand Model Selection
- Press the [ ] key to select the diagnostic icon, and press the [OK] key to select the model brand.
Mode Selection
- Press [ ] to select the vehicle brand, and press [OK] to enter the diagnosis mode selection. There are two options: [Quick Test] and [Control Unit] (the screen is shown below).
Quick Test’
- [Quick Test] is to automatically scan the assembly status of all systems of the vehicle model and read the fault codes. During the system scanning process, you can press and hold [F3] to pause the scanning (the screen is shown below).
[F1] – [Report]
Display the assembly status of the system, explain whether there is a fault code, and expand the fault code description (the screen is shown below).
[F2] – One-click code clearing
For systems that have been assembled and have fault codes, all codes shall be cleared and the fault codes shall be read again.
Single System Diagnosis
Customers independently choose the functions to be performed (the screen is shown below).
Module Information
[Module Information] will display system information, such as production date, serial number and other information (the screen is shown below).
Read Fault Code
[Read Fault Code] (the screen is shown below). ( Note: manual selection of [Current / Pending] is not
required for some vehicles.)
Press the [ ] button to select one of them, press the [OK] key to view the
fault code information in the system, (the screen is shown below).
Press the [ ] key to switch the fault codes.
Clear Fault Code
[Clear Fault Code], the screen will show the relevant prompts for code clearing (the screen is shown below).
Press [F1] to perform code clearing.
Real-time Data Stream
- Press the [ ] key to select [Real-time Data Stream] to enter the data stream selection interface. You can press [F1] to select all or press the [OK] key to select the specifi ed data stream (the screen is shown below).
Read Freeze Frame Data
Press the [ ] key to select [Read Freeze Frame
Data] to read the freeze frame information (the screen is shown below).
Actuation Test
Press the [ ] key to select [Actuation Test] (the screen is shown below). After selecting the desired function, operate according to the prompts.
Voltage Detection
Press the [ ] key in the main menu to select [Voltage Detection], and the OBD battery voltage can be detected in real time (the screen is shown below).
Press [F1] to enter the waveform display (the screen is shown below).
Settings
Press the [ ] key to select the [Settings] icon, press the [OK] key, there are three functions: voice switch, unit switch, and language selection (the screen is shown below).
Voice Settings
Press the [ ] key to select [Voice], press the [OK] key to turn on or of f the voice.
Unit Settings
Press the [ ] key to select [Unit], press [OK] to select metric / imperial units switch.
Language Settings
Press the [ ] key to select [Language], press the [OK] key to select the language of dif ferent countries.
Help
Press the [ ] key to select the [Help] icon, press the [OK] key to view the current system version and software package version.
ABOUT SOFTWARE UPGRADES
Connect the device to the computer and wait for the device to be recognized by the computer. After the recognition is successful, a new drive symbol will appear on the computer. Open this and replace the “DIAGNOSE” folder in the drive with the downloaded “DIAGNOSE” upgrade folder, and then power on again. The updated f iles can be obtained by contacting the customer service or the of f icial website.
Thank you for choosing our products, we will provide you with the following services and commitments:
- The warranty period of this product is 3 years.
- After the warranty expires, replacing parts will incur a repair fee.
- Please contact the manufacturer after failure, we will give you the most perfect service in the shortest time.
The following items are not covered by the warranty:
- The wearing parts are not covered by the warranty.
- Products purchased through informal channels.
- Damage caused by use and maintenance not in accor-dance with the product manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>