WATWAT SMD0JN220709001 Kafir 2-Handle Wall Mounted Pot Filler Instruction Manual
- June 4, 2024
- WATWAT
Table of Contents
Instruction Manual
DESCRIPTION
- Brass construction
- Thread: 1/2 NPT
CARTRIDGE
- Brass cartridge
STANDARDS
- Certified to CUPC
- Certified to AB1953
- Certified to NSF/ANSI 61
- ADA for lever handle
Specifications
POT FILLER
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU I HOLE, 01-3/8″ MIN.
Note: Dimensions are for reference only. Detailed information is in accordance with the final product.
POT FILLER INSTALLATION
INSTALLATION MANUAL Tools You Will Need :
Notes before installation:
- Please check that all components are present.
- Before installation ensure that all feed lines are clear of debris and the on/off valve is present.
- Ensure water pressure is between 20-125 PSI (COLD WATER LINES ONLY).
- Pictures in the manual are general in content and may not represent exactly your purchased faucet. If you are having difficulties please contact a professional plumber.
- If you will be away from home for an extended period you should shut off the main water supply.
Daily maintenance
- Use a soft cloth and vinegar to remove hard-water spots.
- Check the aerator (if present) regularly for calcium build-up when the water stream is not optimum.
- D0 NOT use caustic cleaning products as the use will break down the finish and will void the product warranty.
- Acceptable cleaners include vinegar or mild non-abrasive liquid detergents.
- If the water pressure appears to be less than optimum remove, inspect, clean, or replace the aerator.
- wrap the thread on the pipe with the plumber’s tape and install the escutcheon on the flange. Then install the faucet on the mounting nipple and push the escutcheon against the wall.
- Remove the aerator, turn on the water, then flush the faucet and check for leaks. If ok, then turn off the water and install the aerator.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>