CME EDR200 Swivel and Tilt Wall Bracket Instruction Manual

CME EDR200 Swivel and Tilt Wall Bracket Instruction Manual

Assembly equipment

Technical dat

Parts Instructions

Self-locking nut, designed to prevent accidental loosening. Tighten firmly, with the correct tools, even after feeling the first resistance.

Assembly Instructions

• Please read the warnings and assembly instructions carefully before using this product. We suggest you keep the instruction manual for future use.

• This product contains small parts that if swallowed may cause suffocation. Keep out of the reach of children.

• Consult the TV manual to ensure the product is installed correctly and adjusted ergonomically.

• We suggest you rely on a qualified installer or retailer to assemble and install the product.

• Before mounting the bracket check that the wall you wish to apply it to is suitable.

• The screw anchors supplied
  are suitable only for use on solid walls, perforated brick and reinforced concrete walls. When installing the bracket on other kinds of walls, different anchoring systems should be used.

• hen drilling holes in walls, make sure that they are the correct depth and diameter and remove any dust and waste.

• When mounting the bracket on solid wooden walls or beams, use only the self-threading screws supplied. No screw anchors are required as specified in the instructions.

• The product should only be used to carry TVs with the weights and drill holes indicated.

• The screws supplied to secure the TV to the bracket are suitable for the majority of TVs on the market, but they may not be right for yours. Check that the diameter, length and thread of the screws are right for your TV and if they are not purchase new ones.

• In order to avoid putting excessive tension on the connectors leave the cables slack.

• The bracket is designed for use only in indoor domestic environments with temperatures between + 5°C and + 40°C.

• Only use warm water and neutral soap to clean the product. Do not use solvents.

• Regularly check the anchorages and any parts that move or rotate.

• If damaged, the product should not be used.

• Follow the assembly instructions in the instruction manual. No liability will be accepted if these instructions and proper uses are not adhered to or if the bracket is tampered with in any way.

M9990069 – Istruzioni – CME EDR200 – 02-2023-F021.pdf 1 02/02/2023 11:50:15

M9990069
02/2023 – F021

References

• Meliconi - Lo specialista dell'accessorio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>