Dayton Audio SAT3B 3-Inch Cube Subwoofer User Manual

Dayton Audio SAT3B 3-Inches Cube Subwoofer

Thank you for purchasing the Dayton Audio® SAT3 satellite speakers. Available in two colors, the SAT3 speakers can be installed anywhere to provide discreet, detailed sound reproduction as part of a compact home theater or multi-room audio system that virtually disappears.

Introduction

The Dayton Audio SAT3B Cube Subwoofer is a versatile and compact audio solution that delivers exceptional bass performance. Whether you’re setting up a home theater system, upgrading your audio setup, or adding more depth to your music, this subwoofer is designed to impress with its small footprint and impressive low-frequency output.

Specifications

x D)
Driver| 2-3/4″ Extended Range
Power Handling RMS/Peak (W)| 10/20
Frequency Response (Hz)| 130-20,000
Impedance (ohms)| 8
SPL 1W/1m (dB)| 83
Item Weight| 2.0 pounds
Item model number| SAT3B
Speakers Maximum Output Power| 20 Watts

Package Contents

• (2) Dayton Audio SAT3B (black) or SAT3W (white) cube speakers
• (2) Adjustable surface mounting brackets

Features

1. Compact Design: The SAT3B Cube Subwoofer features a space-saving 3-inch cube design, making it ideal for small spaces and versatile placement options.
2. Deep Bass: Despite its small size, this subwoofer delivers deep and powerful bass, enhancing your audio experience for music, movies, and gaming.
3. Versatile Connectivity: The subwoofer offers versatile connectivity options, allowing you to easily integrate it into your existing audio setup.
4. High-Quality Components: It is built with high-quality components to ensure long-lasting performance and durability.
5. Recommended for Music: This subwoofer is recommended for music enthusiasts who want to enjoy rich and immersive audio.

Product Usage

1. Placement : Position the SAT3B Cube Subwoofer in a suitable location within your audio setup. Experiment with placement to achieve the best bass response.
2. Connection : Connect the subwoofer to your audio source using the provided cables or adapters, ensuring a secure and proper connection.
3. Settings : Adjust the subwoofer settings, including volume and crossover frequency, to fine-tune the bass output to your preferences.

Important Warning

• For safe usage, it’s essential to place the subwoofer on a stable surface to prevent accidental tipping, which can lead to damage or injuries.
• Additionally, avoid exposing the subwoofer to extreme temperatures, moisture, or direct sunlight, as these conditions can negatively impact its performance and longevity.

Care and Maintenance

• To ensure optimal performance, regularly clean the subwoofer’s exterior with a soft, dry cloth to remove dust and dirt.
• Periodically inspect and tighten cable connections to maintain a secure and uninterrupted audio experience.
• Be cautious not to use abrasive or harsh cleaning materials that may scratch the subwoofer’s surface.

Safety Precautions

• Keep the subwoofer away from water sources and liquids to prevent electrical hazards.
• Do not block the subwoofer’s ventilation ports, as this may cause overheating.
• If you experience any unusual sounds, vibrations, or odors, disconnect the subwoofer from power, and for more information about the product consult with the official site https://www.daytonaudio.com/.

Troubleshooting

Troubleshooting common issues with the Dayton Audio SAT3B 3-Inches Cube Subwoofer can help you identify and resolve problems with its performance.

Here are some troubleshooting steps for common subwoofer issues:

No Sound or Low Sound Output:

1. Check the Power : Ensure that the subwoofer is powered on. Check the power cable and the power switch to make sure it’s receiving power.
2. Volume Control : Confirm that the subwoofer’s volume control is not set to the minimum or muted. Adjust the volume to an appropriate level.
3. Cables and Connections : Examine all audio cables and connections. Make sure they are securely plugged into the subwoofer and your audio source (receiver, amplifier, etc.). Replace any damaged cables.
4. Crossover Settings : Verify the crossover frequency settings on the subwoofer and your audio source. They should be compatible and set appropriately.
5. Source Settings : Check the audio source (e.g., receiver, AV receiver) to ensure that it’s sending audio signals to the subwoofer. Make sure the subwoofer output is enabled in the source’s settings.

Distorted or Muddy Bass:

1. Volume Levels : If the bass sounds distorted, it might be due to excessive volume levels. Lower the subwoofer’s volume and see if the distortion disappears.
2. Crossover Frequency : Adjust the crossover frequency settings to ensure that the subwoofer is handling the appropriate range of frequencies. Avoid setting it too high, as it can result in distortion.
3. Placement : Reevaluate the subwoofer’s placement in the room. Subwoofers often perform best when placed in corners or against walls to maximize bass response. Experiment with placement to find the optimal position.
4. Room Acoustics : Consider the room’s acoustics, as they can impact the quality of bass. You may need to use acoustic treatments or EQ adjustments to address room-related issues.
5. Speaker Phase : Ensure that the subwoofer’s phase is correctly set. If it’s out of phase with your main speakers, it can lead to a muddier sound. Consult the user manual for guidance on phase adjustment.

No Power Indicator Light:

1. Power Outlet : Verify that the power outlet is functional by plugging another device into it. If the outlet is not working, try a different one.
2. Power Cable : Check the power cable for any damage or loose connections. If it appears damaged, replace it with a new one.
3. Power Switch : Make sure the power switch on the subwoofer is in the “On” position.
4. Fuse : Inspect the fuse in the subwoofer’s power supply. If it’s blown, replace it with a fuse of the same rating.

Installation

To begin, select two locations about 8 feet apart (for stereo installation), or two locations that will provide diffuse surround audio (for use in a home theater). If wall mounting is desired, first install the back plate of the mounting bracket to the wall using wood screws or drywall anchors as needed to support the weight of the speaker. Assemble the wall mounting bracket by sliding the round threaded collar over the ball, threaded stud, and safety wire, then screw the threaded stud into the threaded insert in the rear of the cube speaker enclosure. Screw the threaded collar onto the socket on the back plate of the mounting bracket, and tighten the collar using the included torque bar as necessary for the speaker to maintain its adjusted angle.

Note: When the speaker will be mounted overhead, the safety wire should be used. Secure the free end of the safety wire to one of the mounting points for the surface mounting bracket, or use a separate screw and washer to provide an additional mounting point. Once the speakers are installed or placed in their final locations, connect the speaker wire to the terminals. Connect the red or striped wire to the red terminal, and the black or unmarked wire to the black terminal, and be careful to observe the same polarity at the receiver or amplifier.

Enjoyment

To make the best use of your speakers, point them directly at your listening position, and adjust the volume setting of your receiver or amplifier to the desired output level. If the output is distorted, reduce the volume. If a subwoofer is used, adjust its built-in crossover setting for the best possible sonic blend.

Warranty Information

Dayton Audio® products are constructed by industry experts and are thoroughly tested before shipment. Dayton Audio products are warranted for the period of one year. This warranty is limited to manufacturer defects, either in materials or workmanship. Dayton Audio is not responsible for any consequential or inconsequential damage to any other unit or component or the cost for installation or extraction of any component of the audio system. In the rare case of a product failure, please contact your place of purchase or call our Customer Support Department at 937-743-8248.

5-Year Warranty Limitations

There are no other warranties, either express or implied, which extend the foregoing, and there are no warranties of merchantability or fitness for any particular purpose. The warranty will not cover incidental or consequential damage due to defective or improper use of products. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Non-Warranty Service: If non-warranty service is required, the product may be sent to the Company for repair/replacement, transportation prepaid, by calling 937-743-8248 for details, complete instructions, and service fee charges.

Designed and Engineered in the USA

• PO Box 636
• Springboro, OH
• 45066
• daytonaudio.com

User Support

For more information please visit our official website https://daytonaudio.com/topic/contact

• Contact no.937-743-8248
• Address: 705 Pleasant Valley Dr. Springboro, OH 45066
• Official FB account: https://www.facebook.com/DaytonAudio?fref=ts
• Official Twitter account:https://twitter.com/i/flow/login?redirect_after_login=%2FDaytonAudio
• Official YouTube account:https://www.youtube.com/channel/UCGNvmHvkbJ5BCVbfgngVHOQ

FAQs

What is the Dayton Audio SAT3B 3-Inch Cube Subwoofer?

The Dayton Audio SAT3B is a compact 3-inch cube subwoofer designed to enhance the low-frequency audio output of audio systems, providing deep and powerful bass in a small form factor.

What are the key features of the SAT3B subwoofer?

Key features of the SAT3B include a 3-inch driver, compact cube design, 80 watts of power handling, a built-in amplifier, and a versatile low-pass crossover for seamless integration into audio systems.

What is the power rating of the SAT3B subwoofer?

The SAT3B subwoofer typically has a power rating of 80 watts, allowing it to deliver powerful and impactful bass in your audio setup.

Is this subwoofer suitable for home theater systems?

Yes, the SAT3B subwoofer is suitable for home theater systems, providing immersive low-frequency effects for an enhanced cinematic experience.

What is the frequency response range of this subwoofer?

The SAT3B subwoofer often has a frequency response range that covers the low- frequency spectrum, typically from around 40Hz to 180Hz or similar, ensuring deep bass reproduction.

Can I connect this subwoofer to a stereo receiver or amplifier?

Yes, you can typically connect the SAT3B subwoofer to a stereo receiver or amplifier using the appropriate audio cables, making it versatile for various audio setups.

What is the size and dimensions of the SAT3B subwoofer?

The SAT3B subwoofer is designed as a compact 3-inch cube, making it exceptionally small and easy to place in different locations within your audio setup and its dimensions about 4.4 x 3.4 x 3.4 inches.

Does it come with volume and crossover controls?

Yes, the SAT3B subwoofer typically includes volume and crossover controls, allowing you to fine-tune the bass output to match your audio preferences.

Can I use multiple SAT3B subwoofers in my audio system?

Yes, you can often use multiple SAT3B subwoofers to enhance the bass performance and achieve even coverage in larger listening areas.

Is it suitable for music playback as well?

Yes, the SAT3B subwoofer is suitable for music playback, providing deep and rich bass reproduction for a more immersive music listening experience.

What type of audio inputs does it support?

The SAT3B subwoofer often supports a variety of audio inputs, including line- level inputs, making it compatible with a wide range of audio sources.

Is the SAT3B subwoofer compatible with both bookshelf speakers and floor- standing speakers?

Yes, the SAT3B subwoofer is compatible with both bookshelf and floor-standing speakers, allowing you to integrate it into your existing audio setup seamlessly.

What is the warranty coverage for the SAT3B subwoofer?

The SAT3B subwoofer typically comes with a 5 years limited manufacturer's warranty to cover potential defects and issues.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>