CYCLIQ FLY6 HD Bike Camera and Light User Guide

June 13, 2024
CYCLIQ

CYCLIQ logo Quick Start GuideCYCLIQ FLY6 HD Bike Camera and
Light

Congratulations on choosing the No.1 brand in HD camera/light combos. The tips below are essential for all Fly6 users.

TIPS

  • Fly6 comes pre-installed with a class 10 MicroSD card.
  • Once powered on, Fly6 will begin recording.
  • Don’t forget to share your footage at cycliq.com/videos for your chance to win prizes.

FLY6 MANUAL
For more detailed information, please download the full Fly6 manual from www.cycliq.com/support

WHAT’S IN THE BOX

Included in your Fly6 box is everything you need to go riding now!CYCLIQ
FLY6 HD Bike Camera and Light - package

FLY6 OVERVIEW

TIP
Light Button – When Fly6 is powered on, a quick press of the power button will scroll through the different light modes. CYCLIQ FLY6 HD Bike Camera and
Light - OVERVIEW 1

TIP
Courtesy Dimmer Button –When Fly6 is powered on, a quick press of the courtesy dimmer button will scroll through the different light brightness modes.CYCLIQ FLY6 HD Bike Camera and Light - OVERVIEW
2

CONNECT & CHARGE

With the supplied USB cable, connect your Fly6 to a PC or Mac. Fly6 will be visible on your computer. Your Fly6 charge light will glow Red while charging and then turn off indicating full charge.CYCLIQ FLY6 HD Bike Camera and
Light - OVERVIEW 3

POWER AND BATTERY LIFE
Fly6 has audible alerts when the unit is turned on/off which denote the battery charge level.

Should the Fly6 battery deplete beyond 5% during operation, 3 long beeps will sound. Video and audio functions will turn off and the light will continue to operate on remaining power for up to 1.5 hours.
NOTE
Audible sounds are only a guide to Fly6 charge levels.

OPERATING YOUR FLY6
Important: Before operating, ensure the USB cover is firmly closed/sealed.
Power Button

  1. Press and hold for 1 second to turn Fly6 on/off.

  2. Quick press to cycle through flashing sequences.
    Courtesy Dimmer

  3. Quick press to cycle through brightness modes.

NOTE
Fly6 will remember your last settings.

MOUNTING FLY6

Fly6 can be mounted on your seat post or aero seat post.
To mount your Fly6 follow these simple steps:

  1. Insert either standard or aero length Velcro strap and pull all the way through until clasp meets housing, ensuring silicon-coated surface is facing outwards to grip your seat post.

  2. Select the appropriate spacer for your bike (0 degree, 7.5 degree, or aero spacer) and place between Fly6 and the seat post, making sure the Fly6 is fully vertical.

  3. While holding Fly6 against the seat post, wrap strap around and thread through the clasp.

  4. Pull strap tight, check Fly6 is secure, then double back the strap and secure on Velcro.

INCIDENT PROTECTION

In the event of an incident, Fly6 is equipped with a safeguard to ensure your important data is not lost.
If you are knocked from your bike and Fly6 tilts past 60 degrees for more than 5 seconds, 3 quick beeps will sound indicating incident mode is active. Fly6 will record for a further 60 minutes before saving and powering off with 3 loud  beeps. CYCLIQ FLY6 HD Bike Camera and Light -
PROTECTION

NOTE
To achieve optimal performance, Cycliq recommends you regularly perform a full overwrite of your MicroSD card using SD Formatter – www.sdcard.org/downloads (free software download).

SET DATE AND TIME

  1. Connect Fly6 to a PC/Mac.

  2. Fly6 will appear on your computer.

  3. Open Fly6 in your file explorer.

  4. Using a text editing application (Text edit on Mac or Notepad on Windows) open CONFIG.TXT

  5. Modify from a ‘0‘ to a ‘1’ in the 1st row.

  6. Modify date to suit the following format:
    Sep 24 2016 12:56:00

  7. Save the file.

  8. Safely remove your Fly6 from your computer.

  9. Turn on to have the settings take effect.

MICRO SD CARD
Included with your Fly6 is an 8GB class 10 MicroSD card which has been pre- installed. Fly6 supports up to 32GB class 10 MicroSD cards.
NOTE
To achieve optimal performance, Cycliq recommends you regularly perform a full overwrite of your MicroSD card using
SD Formatter – www.sdcard.org/downloads (free software download).

TECHNICAL DATA

Video: 1280x720p
Frame Rate: 30 fps
Video Format: .AVI
Video Compression Format: .264
File Size: 10 minutes (~400-900mb)
Battery Life: Up to 6hrs
Max Lumens: Up to 30
Max Supported
Memory Card: 32gb
Recommended
MicroSD Card: Class 10
Weight: 4.5oz (127g)
USB: Micro 2.0

CYCLIQ COMMUNITY

Share your videos with the Cycliq community by uploading them to www.cycliq.com/videos

TIP
Approved videos are automatically entered into regular prize draws.

Follow us on social media

YOUR VIDEOS

TROUBLESHOOTING

PROBLEM SOLUTION
Fly6 powers down unexpectedly Idle mode prevents the battery from depleting

if you have forgotten to turn off Fly6 after 15 minutes with no movement.
Records for only 1 hour| Incident capture protection mode will activate if Fly6 is tilted over more than 60  degrees from vertical for more than 5 seconds. Your Fly6 will then turn off completely after 1 hour.
3 loud beeps| Battery has depleted to 5% or less. Only the camera and audio functions are shut  down leaving the flashing lights functioning, which can last up to 1.5 hours.
OR
Incident capture mode was triggered 1 hour ago and the device has just powered down due to the function completing.
Fly6 won’t charge| Try an alternate USB charge cable.

CAUTION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
There is no guarantee, however, that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  the user is encouraged to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio or television technician for help.

FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and 1 this device must accept any interference received, including interference that may cause undesired operation. 2 The provided shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
WARNING
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

LIMITED WARRANTY
For comprehensive warranty information refer to www.cycliq.com/warranty
CYCLIQ CUSTOMER SUPPORT
For questions, troubleshooting or video solutions visit www.cycliq.com/support

CAUTION
Cycliq recommends the following:

  • Do not look directly at the light.
  • Do not leave the light on when not in use.
  • Do not record with the USB/MicroSD port open.

CYCLIQ logoWWW.CYCLIQ.COM

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals