mikroTIK CCR2004-16G-2S+PC Routers And Wireless User Guide

: June 13, 2024
: Mikrotik

Table of Contents

CCR2004-16G-2S+PC Routers And Wireless
Technical Specifications
Documents / Resources

Quick Guide:

CCR2004-16G-2S+PC Routers And Wireless

This device needs to be upgraded to v7.10 or the latest software version to ensure compliance with local authority regulations!
It is the end user’s responsibility to follow local country regulations. All MikroTik devices must be professionally installed.
This Quick Guide covers the model: CCR2004-16G-2S+PC.

mikroTIK CCR2004 16G 2S+PC Routers And Wireless - QR
Code https://mt.lv/um

This is a Network Device. You can find the product model name on the case label (ID).
Please visit the user manual page on https://mt.lv/um for the full up-to- date user manual. Or scan the QR code with your mobile phone.
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Technical specifications, Full EU Declaration of Conformity, brochures, and more info about products at https://mikrotik.com/products
Configuration manual for software in your language with additional information can be found at https://mt.lv/help
MikroTik devices are for professional use. If you do not have qualifications please seek a consultant https://mikrotik.com/consultants
First steps:

Connect with your PC to the Ethernet15 port.
Connect the device to a power source.
Set your IP for PC to 192.168.88.2/24
Use Web browser or WinBox to connect to the default IP address of 192.168.88.1, with the username: admin and no password.
In case IP is not available then use WinBox and connect with the MAC address.
Update the device by clicking the (Check_for_updates) button to the latest RouterOS software for this to work the device needs to have an active Internet connection.
To manually update the device without public IP, go to our download page https://mikrotik.com/download
Choose your architecture based on your device model under (System/Resources) and download the latest packages from a stable channel to your PC.
Open WinBox and upload packages in the (Files) menu.
Reboot the device.
Set up your password to secure the device.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures
Manufacturer: Mikrotikls SIA, Unijas 2, Riga, Latvia, LV1039.

Note: For some models, check the user and wireless passwords on the sticker.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.
Innovation, Science and Economic Development Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This Class A digital apparatus complies with Canadian ICES-003.
CAN ICES-003 (A) / NMB-003 (A)
UKCA marking

Technical Specifications

Product Power Input Options| DC Adapter Output| IP class of the enclosure| Operating Temperature
---|---|---|---
| Voltage, V| Current , A| |
DC Jack (36 – 57 V DC)
2-pin terminal (36 – 57 V DC)| 48| 0.9| IP20| ±0°..+60°C

#72845

Documents / Resources

| mikroTIK CCR2004-16G-2S+PC Routers And Wireless [pdf] User Guide
CCR2004-16G-2S PC Routers And Wireless, CCR2004-16G-2S PC, Routers And Wireless, And Wireless, Wireless
---|---
| MikroTik CCR2004-16G-2S+PC Routers and Wireless [pdf] User Manual
CCR2004-16G-2S PC Routers and Wireless, CCR2004-16G-2S PC, Routers and Wireless, Wireless