Phaetus X ZODIAC Dragonfly BMO Hotend Installation Guide
- June 4, 2024
- Phaetus
Table of Contents
Phaetus X ZODIAC Dragonfly BMO Hotend
Product Appearance
Exclusive Choice for High Configuration
Thank you for buying Zodiac x Phaetus Dragonfly BMO Hotend.
Product Features
Compatible Filaments
Compatible with all filaments, including: PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives, such as carbon fiber, steel, wood, boron carbide, tungsten and phosphorescent pigment.
Specifications
Product Name: Zodiac x PhaetusDragonfly® BMO
Product Size: 56.8mm .. 23.0mm .. 20.0mm
Nozzle Diameter: Can be matched arbitrarily
Color: Black
Product Net Weight: BMO 38g
Parts & Accessories
-
M1 .4×12 Screws *2pcs
-
H 1 .27 Hexagon bar
H1 .5 Hexagon bar -
H2.0 Hexagon bar
-
M3x12 Screws *2pcs
-
H5.0 Open – Ended wrench Brass sleeve
-
Collect clip
-
Heat conducting silicone grease
Product Exploded View
Product Advantage
- Fixed installation to prevent the rotation of the Hotend during the parts assembly
- High conductivity and good heat resistance to prevent the clog
- High torsional rigidity ,meeting the requirement of changing nozzle by one hand
- Higher heating efficiency
- More precision of the nozzle temperature measurement
- More convenient operatio
- Non filament stick Cleaner printing
3. Insert the capillary into the 2 holes on side A of the heatblock, and
carefully align the 2 holes at the bottom of the heatsink with the capillary.
Slightly press (to ensure that the capillary has penetrated into the
heatsink).
Note: the logo engraved on the heatsink side and the logo engraved on the
heatblock should face the same direction.
4. Use the H1 .27 hexagon bar to put 2 M1 .4 screws into the 2 holes on the
heatblock’s B side and lockthem tightly.
5. Use H1 .5 hexagon bar to load 2 M3 head screws into the 2 threaded holes
on the front and back of the heatblock.
6. If you’re using glass ball typed thermocouple, put the thermocouple into
the brass sleeve in the accessories kit (brass sleeve is shown in the picture
below), then put it into the heatblock, and lock it tightly with the head
screw.
Hot – Tightening
-
Hot – tightening is the last mechanical step before the Zodiac x Phaetus Dragonfly BMO Hotend is ready! Hot – tightening is essential for the sealing of the nozzle and heatbreak to ensure that molten filaments do not leak out of the hotend during use.
-
Using the printer’s control software (or LCD screen), set the hotend’s temperature to 285°C.
Wait 1 minute after its temperature reaches 285°C to equalize the temperature of all components. -
Gently tighten the nozzle first, and at the same time fix the heatblock with the 10mm open – ended wrench carried in the accessories kit, and finally tighten the nozzle with the hexagon bar.
This will keep the nozzle close to the heatbreak and ensure that the hotend does not leak. -
The tightening torque of the hot nozzle is about 2.5nm, which is about the pressure applied by one finger on a small wrench.
ATTENTION: Do not touch the hotend directly with your hands during heating and within a period of time after heating.
Copyright
Phaetus © 2021 Phaetus. All rights reserved.
phaetus.com
Phaetus, the Phaetus logo, are trademarks of Phaetus, registered in China and other countries and regions.
Other company and product names mentioned herein may be trademarks of their respective companies.
Every effort has been made to ensure that the information in this manual is accurate. Phaetus is not responsible for printing or clerical errors.
Documents / Resources
|
Phaetus X ZODIAC Dragonfly BMO
Hotend
[pdf] Installation Guide
X ZODIAC Dragonfly BMO Hotend, X ZODIAC Dragonfly, BMO Hotend, X ZODIAC,
Dragonfly
---|---