Argom ARG-HS-5020BK True Wireless Stereo Earbuds Instructions
- June 13, 2024
- Argom
Table of Contents
**Argom ARG-HS-5020BK True Wireless Stereo Earbuds Instructions
**
Charge the earbuds
Please be fully charged before first use.
Place the earbuds into the case and they will charge automatically by the
magnet.
The LED light of earbuds will turn solid red while charging, and turn off once
charging complete.
The LED light of charging station will turn white breathing while charging for
earbuds then turn off once charging complete for earbuds.
Battery low: LED flashes red per 30seconds and prompt “battery low”.
Charge the charging case:
Plug the provided Type-C charging cable into the bottom of charging case, the LED light will turn green breathing while charging then turn solid green once charging complete. If the charging case is in low battery, the LED flashes white. Charging time for charging case: around 2hours
Bluetooth Pairing
Open the charging case, the earbuds will begin auto-pairing with each other. The earbuds LED will flash red and blue and going to device pairing mode. Activate the Bluetooth function on your device to search for “RT65AE” and connect it. It is ready to use.
ENC Tech
The ENC (Environmental Noise cancellation tech) algorithm cancels the background noise so that you can be heard crystal clear via voice calls. The earbuds are equipped with 4 mics and the ENC already activated by default.
Single earbuds usage
Each earbud can be used independently
Calling/ Music:
Answer/ END call: Touch L/R earbud twice：
Rejecting an incoming call: Touch and hold L/R earbud 2 seconds until you
hear a prompt tone ”du”:
Play/Pause: Touch L/R earbud twice
Next song: Touch R earbud 3 times
Previous song: Touch L earbud 3 times:
Voice Assistant:
Touch and hold L earbud for 2 seconds until you hear a prompt sound to active
the Voice Assistant/ Siri function. This function may not work for all
devices.
ANC Function
Transparency ON: Touch and hold R earbud for 2 seconds
ANC ON: Touch and hold R earbud for 2 seconds
ANC OFF: Touch and hold R earbud for 2 seconds
Power off:
Method 1: Place the earbuds back into the charging case.
Method 2: Touch and hold the earbuds for 5seconds until you hear prompt”
Power off”
Reset Earbuds
Place L/R earbuds into the charging case, keep the case open and touch the
reset button on the charging case for 5s-7s. This clears all connection
records and all device.
Remark: TWS without connecting any device within 5mins, it will power off automatically.
What is in the box
- Bluetooth earbuds
- Charging case
- Type-C cable
- User manual
- S,M,L 3 sizes silicon earplugs.
Product’s specification
Bluetooth Version: 5.3
ANC Level: -28dB
Hall Switch: Yes
Earbuds Battery: 35mAh (2C fast charging)
Case Battery: 470mAh
Usage time:
5H /25H ANC off
4H /20H ANC on
Charging time:
Earbuds 0.8H, 10mins=2.5H usage time Station 2H
Waterproof: IPX5
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna (s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in
portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>