Ossiform P3D Scaffolds Cell Recovery From Cells Cultured Instructions
- June 13, 2024
- Ossiform
Table of Contents
Ossiform P3D Scaffolds Cell Recovery From Cells Cultured
Product Information
The P3D Scaffolds are a research-use-only (RUO) product developed by Ossiform ApS. They are designed for cell recovery from cells cultured on the scaffolds. Please note that these scaffolds should not be used for clinical purposes.
For more detailed protocols and information, you can visit Ossiform’s Resources Platform.
Before starting, it is important to handle the materials properly. Refer to the general advice on material handling provided in the user manual.
Contact Information:
- Company: Ossiform ApS
- Address: Oslogade 1, 5000 Odense, Denmark
- Telephone: +45 5360 0670
- Email: research@ossiform.com
- Website: https://ossiform.com
Disclaimer: Ossiform makes no other warranties, expressed or implied, including the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. The P3D Scaffolds are protected by one or more US, European, and/or foreign patents.
You can download the Safety Data Sheet (SDS) from Ossiform’s website.
Product Usage Instructions
- Ensure you have read and understood the general advice on material handling.
- Culture cells on the P3D Scaffolds according to your experimental requirements.
- When ready for cell recovery, follow the protocol below:
- Prepare the necessary equipment and reagents for cell recovery.
- Handle the P3D Scaffolds with care to avoid damage.
- Transfer the P3D Scaffolds to a suitable container or plate.
- Add the appropriate cell recovery solution to the container or plate, ensuring the scaffolds are fully immersed.
- Incubate the container or plate with the scaffolds and cell recovery solution under appropriate conditions (e.g., temperature, humidity, time).
- Gently agitate or swirl the container or plate to facilitate cell detachment from the P3D Scaffolds
- Collect the cell suspension from the container or plate, ensuring to minimize scaffold debris.
- Proceed with further analysis or experimentation using the collected cell suspension.
- Dispose of the used P3D Scaffolds and any remaining materials according to applicable regulations and guidelines.
- Revision 1.0
- Revised 2021.12.09
- Ossiform ApS
PROTOCOL
Cell recovery from cells cultured on P3D Scaffolds
Application
This guide explains how cell recovery works with P3D Scaffolds. For more
protocols, please visit our Resources Platform.
Materials
- Trypsin, accuracy, or other appropriate enzymes
Notes before starting and general advice on material handling
- All handling of The P3D Scaffolds products should be performed using gloves, according to the standard aseptic methods.
- In general, 3D cultures require longer incubation times and more rigorous shaking than 2D cultures.
Procedure
Cell recovery from the P3D scaffolds can be performed using standard protocols with small modifications. Make sure that the enzymatic agent completely covers the scaffolds (minimum 300uL pr well for 24-well plates). Incubate for 3-5 minutes. Stop the trypsinization by adding media and transfer liquid and scaffold to a clean 50 mL Falcon tube. Centrifuge for 5 minutes at 1200-4000 rpm to retrieve cells “dislodged” inside the scaffold as well. Remove the scaffold and resuspend cell pellet by pipetting up and down.
Disclaimer:
The products are “For Research Use Only (RUO)” and should not be used for
clinical purposes. Ossiform makes no other warranties, expressed or implied,
including the implied warranty of merchantability and the implied warranty of
fitness for a particular purpose.
Patent status:
The product is protected by one or more US, European, and/or foreign patents.
Safety Data Sheet:
Download from our website here.
- Ossiform ApS – Oslogade 1, 5000 Odense, Denmark
- Telephone: +45 5360 0670
- Email: research@ossiform.com.
- Website: https://ossiform.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>