FENIX WF11E Intrinsically Safe Flashlight Instruction Manual

FENIX WF11E Intrinsically Safe Flashlight

STANDARDS

• IEC 60079-0:2011 Edition:6.0
• IEC 60079-11:2011 Edition:6.0
• EN 60079-0:2012/A11:2013
• EN 60079-11:2012
• CAN/CSA-C22.2 No. 0-10 (r 2015)
• CSA C22.2 No.250.4-14
• CAN/CSA-C22.2 No. 60079-0:15
• CAN/CSA-C22.2 No. 60079-11:14
• UL153- Thirteenth Edition
• ANSIUL 913-2018
• ANSIUL 60079-0-2013 (r2017)
• ANSI/UL 60079-11 Sixth Edition (March28, 2014)
• GB 3836.1-2010
• GB 3836.4-2010
• GB 12476.1-2013
• GB 12476.4-2010

CERTIFICATE NUMBER & MARKING

• IECX: IECE TUR 18.0041X
  Ex ia IIC T4 Ga
  Ex ia IIIC T130°C Da IP66/IP67

• ATEX: TÜV 18 ATEX 8251 X
  II 1G Ex ia IIC T4 Ga
  II 1D Ex ia IIIC T130°C Da IP66/IP67

• PCEC: CE19.2314X
  Ex ia IIC T4 Ga
  Ex iaD 20 T130°C

• SGS:SGSNA/21/SUW/00098X
  Class I,Division 1, Groups A B C D,T4
  Class II,Division 1,Groups E F G, T4
  Class III
  Class I, Zone 0 A/Ex ia IIC T4 Ga
  Zone 20 A/Ex ia IIIC T130°C Da

LIGHTING FOR EXTREMES

FENIXLIGHT LIMITED
Tel : +86-755-29631163/83/93
Fax : +86-755-29631181
E-mail: info@fenixlight.com
Web : www.fenixlight.com
Address : 2F/3F, West of Building A, Xinghong Technology Park, 111 Shuiku Road, Fenghuanggang Community, Xixiang Street, Bao’an District, Shenzhen City, Guangdong Province, China

WF11E Intrinsically safe flashlight
The Fenix WIlE is an intrinsically safe flashlight with magnetic tail and body clip, which emits a max output of 200lumens. It has passed the necessary tests and was certi fied by IECEx, SGS and ATEX. Thus this product can be safely used in Zone 0, Zone 1 and Zone 2, where there is explosive gas mixture belongs to lIA, IIB and IIC; and it can be used in combustible dust areas: Zone 20, Zone 21 and Zone 22 as well, such as petroleum, chemical and textile industries, fire controlling, metallurgical areas, electric power stations and areas, and paper producing plants, etc.

PRODUCT FEATURES

• Intrinsically safe flashlight for use in hazardous areas.
• Cree XP-G2 neutral white LED with a lifespan of 50,000 hours.
• Powered by three AA alkaline batteries as shown in the battery list below.
• Three output levels, max 200 lumens.
• Made of explosion-proof and antistatic plastics.
• Magnetic light tail and body clip.
• Physical reverse polarity protection, to protect from improper battery insertion.
• Weight: 5.64 oz / 160 g (excluding batteries).
• 6.59″‘ Length x 0.94″ Width x 1.93″ Height / 167.5 × 24 × 49 mm.

MARKINGS

• Exia IIC T4 Ga
• Exia I|IC T130°C Da IP66/IP67
• I| 1G Ex ia lIC T4 Ga
• |I 1D Exia I|IC T130°C Da IP66/IP67
• Class I, Division 1, Groups A B C D,T4
• Class II, Division 1, Groups E F G,T4

TECHNICAL PARAMETERS

Test condition : Three Energizer E91 AA Alkaline batteries, temperature 21 ‡ 3°C, humidity 50% – 80%.

• Class III
• Class I, Zone 0 A/Exia lIC T4 Ga
• Zone 20 A/Exia IIIC T130°C Da
• Exia lIC T4 Ga
• ExiaD 20 T130°C

OPERATING INSTRUCTION

On/Off
Press and hold the switch for 0.5 seconds to turn on/off the light.
Output Selection
With the light turned on, single click the switch to cycle through Low->Med->High.

BATTERY SPECIFICATIONS

Warning:

1. Do not disassemble the light or replace battery in potentially explosive atmospheres.
2. For your safety only use the abovementioned batteries.
3. Do not mix batteries of different types and capacities. Doing so may cause danger, or damage the flashlight.

BATTERY REPLACEMENT
Unscrew the light head and remove the battery holder. Replace the battery and ensure it is inserted in accordance with polarity marks. Insert battery holder into the light body then tighten the light head.

USAGE AND MAINTENANCE

• Uses only the three recommended types of batteries.
• If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.

INCLUDED
WF11E Flashlight, 3 X A Alkaline batteries (Energizer E91), Spare 0-ring, Lanyard, User manual, Warranty card

WARNING

• Do not disassemble the light or replace battery in potentialv explosive amosoneres.
• The flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone’s eyes.
• Do not use in explosive atmospheres if the flashlight is with missing parts or its shell is obviously broken.

SPECIAL CONDITION OF USE

1. Do not open the enclosure or replace the batteries when an explosive atmosphere may be present.
2. Only the following batteries may be used in the model

WF11E Flashlight:

• Energizer E91 AA Alkaline.
• Duracell MN1500 AA Alkaline.
• Rayovac 815 AA Alkaline.
• MAX 70 HOURS
• 3 x AA ALKALINE BATTERIES

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>