MX5 things MX-5 ND Trunk Light Kit Installation Guide
- June 13, 2024
- MX5 things
Table of Contents
MX5 things MX-5 ND Trunk Light Kit
Product Information
The MX-5 ND Trunk Light Kit is an accessory designed to provide additional
lighting inside the trunk of the MX-5 ND model. It includes an LED strip, a
Y-Harness, and necessary connectors for installation. The LED strip is
equipped with a protective tape for
easy attachment.
Product Usage Instructions
- Step 1: Preparation
- Clear the surface of the trunk where the LED strip will be attached using the provided alcohol pad.
- Attach the LED strip connector to the Y-Harness.
- Step 2: Attaching the LED strip
- Peel off the red protective tape from the LED strip.
- Attach the LED strip to the back of the trunk, ensuring a secure fit.
- Step 3: Accessing the trunk light connector
- Remove the back plastic panel that covers the trunk light connector. This will allow you to connect the Trunk Light Kit.
- Step 4: Disconnecting the existing light module
- Unplug the connector from the light module that is currently installed in the trunk.
- Step 5: Routing the cable and installing the Y-Harness
- Route the cable from the LED strip behind the panels, ensuring it is hidden from view. Install the Y-Harness at a convenient location.
- Use zip ties to secure the cable and connectors in place.
MX-5 ND Trunk Light Kit Installation Instruction
-
Step 1.
Preparation:
Clear the surface with the alcohol pad.
Attach the LED strip connector to the Y-Harness. -
Step 2.
Peel red protective tape from LED strip and attach to the back of the trunk.
- Step 3.
Remove the back plastic panel to access the trunk light connector.
-
Step 4.
Unplug the connector from the light module. -
Step 5.
Route cable from LED strip behind panels and Install Y-harness. Use zip ties to secure the cable and connectors. -
Step 6.
Reinstall the trunk panel with 4 fasteners.
MX5Things LLC ©2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>