GILL 730182C Fusion F8 Starting Block Instructions
- October 31, 2023
- GILL
Table of Contents
730182 – FUSION 8×8 STARTING BLOCK
INSTRUCTIONS
730182C Fusion F8 Starting Block
Pedal pads are available in the following colors:
- Royal Blue
- Red
- Orange
- Black
- Green
Precise and consistent foot placement is ensured using the integrated pedal
markings.
Pedals are adjustable to 30°, 40°, 50°, and 60° settings. Angled spikes in the
base of the pedals guarantee a start with absolutely no slipping. Built in
handle allows for easy carriage.
The FUSION starting block is shipped unassembled.
The following tools are needed:
- Needle Nose Pliers
- Spike Wrench
- Allen Key (provided)
-
Pedal pads
Set the angle of the pedal to the 60 position.
Insert the tabs on the pedal pad into the holes in the pedal plate.
Use one hand to press on the pedal pad. Use the other hand to gently pull the tabs through the holes with needle nose pliers.
Gently wiggle the tab to help it through the hole. Be careful not to pull the tab off of the pedal pad.
-
False start bracket
Fasten the false start bracket to the back of the rail with the flat head screw provided.
Make sure that the “teeth” of the rail are pointing away from the false start bracket.
-
Pedals
Slide each pedal onto the rail so that the pedal pad is facing towards the open end of the rail. -
Handle
Fasten the handle to the front of the rail with the flat head screw provided.
-
Spikes
Flip the starting block over and install the spikes into the bottom of each pedal.
Replacement Parts
| 7301821C02 – Royal Blue
7301821C03 – Red
7301821C05 – Orange
7301821C12 – Black
7301821C15 – Green
---|---
| REPL00043
Pedal Set Screws QTY 10
| 7301813
Rail
| 73016504
Spike Kit
includes 16 spikes
| 7301822
Includes:
Right & Left Pedal with Pedal to Rail Connectors
Handle & Rear Bracket
Handle & Rear Bracket Screws
Copyright ©2021 by Gill Athletics.
All rights reserved.
2/18/2022
inst 730182
www.gillathletics.com
800-637-3090