Puxinat BT103 Bluetooth Separable Sound Bars User Manual

Puxinat BT103 Bluetooth Separable Sound Bars

Introduction

The Puxinat BT103 Bluetooth Separable Sound Bars are a versatile audio solution designed to enhance your entertainment experience. These sound bars are engineered to deliver high-quality sound for your home theater, gaming, or music needs. With a sleek and modern design, these sound bars are a perfect addition to any living space.

Specifications

• Audio Output Power: 40W (20W x 2)
• Frequency Response: 60Hz – 20kHz
• Bluetooth Version: 5.0
• Inputs: Bluetooth, AUX, USB, TF Card
• Separable Design: Two detachable sound bars
• Built-in Battery: Yes, rechargeable
• Dimensions (Each Sound Bar): 16.5 inches (L) x 2.2 inches (W) x 2.4 inches (H)
• Weight (Each Sound Bar): Approximately 1.5 lbs

What’s in the Box

• 2 x Bluetooth Separable Sound Bars
• 1 x Remote Control
• 1 x AUX Cable
• 1 x USB Charging Cable
• User Manual

Description

Features

• Bluetooth Connectivity: Easily connect your devices wirelessly to enjoy music, movies, and games with clear and immersive sound.
• Separable Design: The two sound bars can be used together for a full stereo experience or separated for versatile placement options.
• Multiple Input Options: Connect via Bluetooth, AUX, USB, or TF card for a variety of audio sources.
• Rechargeable Battery: Built-in rechargeable batteries allow for cordless operation, making it portable and suitable for outdoor use.
• Remote Control: Conveniently control the sound bars from a distance with the included remote.
• LED Display: The LED display provides clear information about the input source, volume, and other settings.

Unique Detachable Design

How to Use

1. Power On/Off: Press and hold the power button on the sound bars or use the remote control to turn them on/off.
2. Bluetooth Pairing: Enable Bluetooth on your device and select “Puxinat BT103” from the available devices list to connect.
3. Input Selection: Use the “Source” button on the remote to switch between Bluetooth, AUX, USB, or TF card mode.
4. Volume Control: Adjust the volume using the remote control or the dedicated buttons on the sound bars.
5. Separation: To separate the sound bars, gently pull them apart. To combine them, align the magnets and push them together.
6. Charging: Connect the included USB cable to the sound bars for charging when needed.

2.2ch and Built-in Dual Subwoofer

Safety

• Keep Away from Water: Do not expose the sound bars to water or moisture. Water can cause electrical damage and pose a serious safety hazard. Ensure they are placed in a dry environment.
• Avoid Extreme Temperatures: Do not expose the sound bars to extreme temperatures, such as direct sunlight or freezing conditions. High temperatures can affect the internal components, and low temperatures can impact battery performance.
• Proper Ventilation: Allow for adequate ventilation around the sound bars. Ensure that the ventilation slots are not obstructed, as overheating can occur if the device cannot dissipate heat effectively.
• Child Safety: Keep the sound bars out of reach of children, especially if they have small detachable parts that could be a choking hazard. Children should also be educated about safe usage and not tamper with the device.
• Stability: Ensure that the sound bars are placed on a stable and flat surface to prevent them from falling or tipping over. Unstable placement can result in damage or accidents.
• Power Sources: Connect the sound bars to the appropriate power source as specified in the user manual. Avoid using incorrect adapters or power sources, as this can damage the device and pose a safety risk.

3D Stereo Surround Sound

• Cable Safety: Ensure that the power cables and connectors are not damaged or frayed. Damaged cables can cause electrical issues and even fire hazards. Replace damaged cables immediately.
• Overloading: Do not overload the sound bars with excessive volume levels for extended periods, as this can damage the speakers and your hearing. Listen at a comfortable volume.
• Cleaning: Clean the sound bars using a soft, dry cloth to prevent dust buildup. Do not use liquid cleaners or immerse the device in water.
• Repairs: Do not attempt to disassemble or repair the sound bars yourself unless you are a qualified technician. Unauthorized repairs can void warranties and compromise safety.
• Battery Safety: If the sound bars have a built-in rechargeable battery, only use the recommended charger and follow the manufacturer’s instructions for charging. Overcharging or using the wrong charger can lead to battery damage or overheating.
• Transportation: When transporting the sound bars, use the provided protective packaging or carry case, if available. This will help prevent physical damage during transit.

Multiple Connection

• Warnings and Instructions: Always follow the manufacturer’s warnings, instructions, and guidelines provided in the user manual. These guidelines are designed to ensure the safe and proper use of the device.

Bluetooth

Maintenance

• Regular Cleaning: Dust and debris can accumulate on the sound bars’ surfaces, affecting both the appearance and sound quality. Use a soft, lint-free cloth to wipe down the sound bars periodically. Avoid using abrasive materials or harsh chemicals, as they can damage th finish.
• Keep Away from Liquids: To prevent electrical hazards and damage to internal components, make sure the sound bars stay away from liquids. Avoid placing drinks or water containers near them.
• Avoid Extreme Temperatures: Exposing the sound bars to extreme temperatures can lead to performance issues. Keep them in a location where the temperature remains within a reasonable range, typically between 0°C to 40°C (32°F to 104°F).
• Check and Clean Connectors: Periodically inspect the input and output connectors on the sound bars for dirt or debris. Use compressed air or a soft brush to gently clean them if necessary. Dirty connectors can cause poor connectivity and affect sound quality.
• Battery Care (If Applicable): If your Puxinat BT103 sound bars have a built-in rechargeable battery, ensure that you recharge them regularly to maintain battery health. Follow the manufacturer’s recommendations for charging cycles and storage when not in use.
• Firmware Updates (If Applicable): If the manufacturer provides firmware updates for your sound bars, consider checking for and applying these updates. Firmware updates can improve performance, add features, and address bugs or compatibility issues.
• Store Properly: When not in use, store the sound bars in a cool, dry place. If you need to store them for an extended period, consider removing the battery (if applicable) and storing it separately to prevent potential battery degradation.
• Protect from Physical Damage: To avoid physical damage, handle the sound bars with care. Protect them from accidental drops, impacts, or other potential sources of damage.
• Consult the User Manual: Always refer to the user manual or manufacturer’s instructions for specific maintenance guidelines and safety precautions. Following the manufacturer’s recommendations is crucial to maintaining your sound bars correctly.

BUILT…IN DSP TECHNOLOGY

Troubleshooting

No Sound or Low Sound:

• Check if the sound bars are powered on and the LED indicator is lit.
• Ensure that the volume is turned up on both the sound bars and your connected device.
• Verify that the correct input source (e.g., Bluetooth, AUX, USB, TF card) is selected.
• Check the cables and connections for any loose or damaged parts.

Bluetooth Connectivity Issues:

• Make sure that Bluetooth is enabled on your device (phone, tablet, computer).
• Check if the sound bars are in Bluetooth pairing mode (LED indicator flashing).
• Ensure you are within the Bluetooth range (typically around 30 feet or 10 meters).
• Disconnect and then re-pair your device with the sound bars.
• Clear the Bluetooth pairing list on the sound bars and your device and try pairing again.

Remote Control Not Working:

• Check if the remote control has a working battery. Replace the battery if necessary.
• Make sure you are using the remote within the specified range and pointing it towards the sound bars.
• Remove any obstructions that might be blocking the remote’s signal to the sound bars.
• Try resetting the remote control by removing and reinserting the battery.

Charging Problems:

• Ensure that the USB cable is properly connected to both the sound bars and a power source.
• Check the condition of the USB cable for damage and replace it if needed.
• Make sure the sound bars are compatible with the power source you are using (e.g., USB wall charger, computer).
• Allow the sound bars sufficient time to charge fully before use.

Sound Quality Issues (e.g., distortion, static):

• Check if there are any obstructions between the sound bars and your device causing interference.
• Ensure that the audio source (e.g., music file, video) is of good quality and not corrupted.
• Adjust the EQ settings on your connected device for better sound quality.
• If the issue persists, try playing audio from a different source to rule out device-specific problems.

Separation/Combination Problems:

• When separating the sound bars, ensure you pull them apart gently without excessive force.
• To combine the sound bars, align the magnets on both ends and push them together.
• Check for any debris or foreign objects that might hinder the separation or combination process.

FAQs

What is the Puxinat BT103 Bluetooth Separable Sound Bar?

The Puxinat BT103 Bluetooth Separable Sound Bar is a high-quality audio device designed to enhance your audio experience with wireless connectivity.

What are the key features of the BT103 sound bar?

The BT103 features Bluetooth connectivity, a separable design for flexible placement, rich sound quality, and multiple audio modes for a customized listening experience.

Is it easy to set up and pair with devices?

Yes, the BT103 is easy to set up and pairs quickly with compatible devices using Bluetooth technology.

What is the range of Bluetooth connectivity?

The Bluetooth range of the BT103 is typically up to 30 feet (10 meters), ensuring a stable connection with your devices.

Can I use it with my TV, smartphone, or other audio sources?

Yes, the BT103 is compatible with a wide range of audio sources, including TVs, smartphones, tablets, and more.

What is the sound quality like?

The BT103 offers high-quality sound with clear audio, deep bass, and adjustable settings to customize your listening experience.

Does it come with a remote control?

Yes, the sound bar comes with a remote control for convenient operation.

How do I mount or place the sound bar?

The BT103 can be placed on a flat surface or mounted on the wall, providing flexibility in placement options.

Is it suitable for use in large rooms?

Yes, the BT103 is designed to deliver clear audio in both small and large rooms, making it versatile for different spaces.

What is the power source for the sound bar?

The BT103 is typically powered through an electrical outlet, and it comes with the necessary power cord.

Is it compatible with voice assistants like Alexa or Google Assistant?

It may be compatible with some voice assistants, depending on your devices. Check the product details for specific compatibility information.

What is the warranty coverage for the BT103 sound bar?

Warranty coverage may vary, so it's advisable to check the warranty details provided by the manufacturer or retailer at the time of purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>