PALMDALE 500 LUX Easy Camp Palmdale 500 Tent Instruction Manual
- June 13, 2024
- easy camp
Table of Contents
PALMDALE 500 LUX Easy Camp Palmdale 500 Tent
Product Information
The PALMDALE tent is available in three different models: 500 LUX, 600 LUX, and 800 LUX. The tent is designed for outdoor use and provides a spacious and comfortable sleeping area. It features fiberglass poles, a flysheet, sleeping cabins, and guylines for added stability.
Product Usage Instructions
- When unpacking the tent, take note of how it should be repacked for future use.
- Choose an even and clean area to spread out the flysheet.
- Assemble the fiberglass poles and push them through the sleeves marked with color codes. Place the ends of the poles over the pins fastened in the rings to raise the tent. Attach the hooks on the flysheet to the poles.
- Position the tent as desired and secure it by pegging it down through the loops and metal rings. Start at the ends and work your way around. Use a mallet to secure the pegs in the ground, taking care to protect your hands and feet.
- Hang the sleeping cabins inside the tent using the provided straps with rings. Attach the cabins to the floor using the hooks.
- For added stability in strong winds, use guylines and pegs to secure the tent.
- Finally, make sure to secure the tent against strong winds with guylines and pegs.
For more information, tips on maintenance, and videos on setup, please visit www.youtube.com/easycamptent.
SET-UP INSTRUCTIONS
This tent should be erected by at least two people!
- When unpacking the tent, it is a good idea to familiarise yourself with how it should be repacked.
- Spread out the flysheet in an area that is as even and clean as possible.
- Assemble the fibreglass poles and push them through the sleeves marked with color. The tent can now be raised by placing the ends of the poles down over the pins fastened in the rings. Then fasten the hooks on the flysheet to the poles.
- Position the tent as required. Peg it down through the loops and metal rings. Start at the ends and then do it all around. Use a mallet to secure the pegs in the ground but be careful of your hands and feet when hitting the peg.
- The sleeping cabins can now be hung in the tent, using the straps with rings provided for the purpose, and then attach the cabins to the floor with the hooks.
- Secure the tent against strong winds with guylines and pegs.
Please turn over for more info and tips on maintenance.
Check out www.youtube.com/easycamptent
EASYCAMP.COM
Easy Camp is a reg. Trademark of Oase Outdoors ApS. EU: Kornvej 9, DK-7323
Give. UK: One Glass Wharf, Bristol, BS2 0ZX © 8/2022 Oase Outdoors.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>