Central RESTAURANT PRODUCTS (E)9451-12CDCP Heater Proofer Instruction Manual

Central RESTAURANT PRODUCTS (E)9451-12CDCP Heater Proofer

Product Information

The Heater Proofer is an aluminum transport cabinet designed to function as a hot food holding cabinet and/or proofing cabinet. It is available in various models, including (E)9451-12CDCP, (E)9451-12SDCP, (E)9451-34CDCP, and (E)9451-34SDCP. The unit is manufactured by Star International Holdings Inc., Company and has the model number 2M-Z18494.

Features:

• Aluminum transport cabinet
• Heaters for hot food holding
• Can be used as a proofing cabinet
• Electrical socket on the back of the drawer for power cord connection
• Main power switch on the front of the drawer
• Air circulating fan
• Designed for commercial use only

MODEL

• (E)9451-12CDCP, (E)9451-12SDCP,
• (E)9451-34CDCP, (E) 9451-34CDCP

Specifications:

Model| Width (Exterior)| Depth (Exterior)| Height (Exterior)| Width (Interior)| Depth (Interior)| Height (Interior)| Weight (Shipping)| Electrical Specifications
---|---|---|---|---|---|---|---|---
9451-12CDCP| 22.8125″| 33.3125″| 30.3125″| 15.625″| 18.125″| 27.5″| 100 lbs| 120V, 1.5 kW, 1 Phase, 50/60 Hz
9451-12SDCP| 22.8125″| 33.3125″| 67.5625″| 15.625″| 18.125″| 27.5″| 100 lbs| 120V, 1.5 kW, 1 Phase, 50/60 Hz
9451-34CDCP| 23.3125″| 33.875″| 30.3125″| 18.125″| 27.5″| 51.75″| 140 lbs| 120V, 1.5 kW, 1 Phase, 50/60 Hz
9451-34SDCP| 23.3125″| 33.875″| 67.5625″| 18.125″| 27.5″| 51.75″| 140 lbs| 120V, 1.5 kW, 1 Phase, 50/60 Hz

Product Usage Instructions

CAUTION: The Heater Proofer is not a cooking appliance. It is designed to hold food at a constant temperature and supply humidity for proofing (if applicable). This unit is intended for commercial use only by trained personnel and should not be used in or around homes or directly by the general public in food service locations.

1. Installation: Place the Heater Proofer in a suitable location with proper ventilation. Ensure that the power cord can reach an electrical outlet.
2. Power Connection: Slide the heater or heat drawer into place on the floor of the cabinet. Connect the supplied power cord to the electrical socket on the back of the drawer. Plug the power cord into an electrical outlet through the access hole in the back of the cabinet.
3. Power On: Locate the main power switch on the front of the drawer. Switch it ON to activate the unit. The light in the switch will turn on, and the air circulating fan in the drawer will start operating. The fan will continue running as long as the unit is switched ON.
4. Maintenance and Repairs: For any required maintenance or repairs, contact your local authorized service agent. Keep a record of the model number, serial number, voltage, and purchase date for faster service.

For additional assistance or information, you can contact Star International Holdings Inc., Company’s service help desk during business hours at:

Telephone : 314-678-6303
Fax : 314-781-2714
Email: Parts@star-mfg.com, Service@star- mfg.com, Warranty@star-mfg.com

For an updated authorized service agent listing, visit the website: www.star- mfg.com
Mailing Address : Star International Holdings Inc., Company, 10 Sunnen Drive, St. Louis, MO 63143, U.S.A

SAFETY SYMBOL

These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

• Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability.
• Star reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
• Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star International Holdings Inc., Company exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service.

• Model No.
• Serial No.
• Voltage
• Purchase Date

Authorized Service Agent Listing
Reference the listing provided with the unit or for an updated listing go to:
Website : www.star-mfg.com
E-mail Service@star-mfg.com

Service Help Desk

• Business Hours: 8:00 am to 4:30 p.m. Central Standard Time

• Telephone : 314-678-6303

• Fax : 314-781-2714

• E-mail Parts@star-mfg.com
  Service@star-mfg.com
  Warranty@star-mfg.com

• Website : www.star-mfg.com

• Mailing Address: Star International Holdings Inc., Company 10 Sunnen Drive St. Louis, MO 63143 U.S.A

SERVICE SPECIFICATIONS

• The Heater Proofer is an aluminum transport cabinet with heaters to function as a hot food holding cabinet, and/or as a proofing cabinet.
• The heater, or heat drawer, is slid into place on the floor of the cabinet. An electrical socket on the back of the drawer is provided to accept the supplied power cord, which is plugged into the drawer through an access hole in the back of the cabinet.
• The main power switch on the front of the drawer, when switched “ON”, will turn on the light in the switch and turn on the air circulating fan in the drawer.
• The circulating fan will operate continuously while the unit is “ON”.
• The thermostat control knobs are mounted to the left and right of the heat/proof switch. The left thermostat knob controls the heat in the cabinet from 1 (low heat: approximately 80°F) to 9 (high heat: approximately 185°F). The right thermostat knob controls the humidity from 1 (approximately 20% relative humidity) to 9 (in excess of 100% relative humidity). Average setting will be approx. 6 (approximately 85% relative humidity).

SIZE SPECIFICATIONS

| Exterior| Interior| Weight Shipping
Height| Width| Depth| Height| Width| Depth
9451-12| 30.3125”| 22.8125”| 33.3125”| 15.625”| 18.125”| 27.5”| 100lbs
9451-34| 67.5625”| 23.3125”| 33.875”| 51.75”| 18.125”| 27.5”| 140lbs
ELECTRICAL SPECIFICATIONS

Model| Volts| Watts| Phase| Hz| NEMA
9451-12CDCP|

120V

|

1.5 kW

|

1

|

50/60 Hz

|

5-20P

9451-12SDCP
9451-34CDCP
9451-34SDCP
E9451-12CDCP
E9451-12SDCP
E9451-34CDCP
E9451-34SDCP

CAUTION

• This equipment is designed to hold food at a constant temperature, and supply humidity for proofing when the application applies, this is NOT a cooking appliance. This unit is sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations.
• Before using your new equipment, read and understand all the instructions & labels associated with the unit prior to putting it into operation. Make sure all people associated with its use understand the units operation & safety before they use the unit.
• All shipping containers should be checked for freight damage both visible and concealed. This unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in damaged condition, either apparent or concealed, a claim must be made with the delivering carrier.
• Concealed damage or loss – if damage or loss is not apparent until after equipment is unpacked, a request for inspection of concealed damage must be made with carrier within 15 days. Be certain to retain all contents plus external and internal packaging materials for inspection. The carrier will make an inspection and will supply necessary claim forms.

INSTALLATION

• This unit is equipped for the voltage indicated on the nameplate mounted the side of the unit. They will operate on alternating current (AC) only.
• The electrical connection must be made in accordance with local codes or in the absence of local codes with NFPA No.70 latest edition (in Canada use: CAS STD. C22.1). The electrical service is provided by a cord and plug. Each appliance requires a 120 volt grounded supply. Supply wires must be 14 gauge or larger to carry the load for one proofer

WARNING

DO NOT CONNECT TO DIRECT CURRENT (DC). THIS APPLIANCE IS EQUIPPED WITH A 3-PRONG (GROUNDED) PLUG FOR YOUR PROTECTION AGAINST SHOCK HAZARD AND MUST BE PLUGGED DIRECTLY INTO A PROPERLY GROUNDED 3-PRONG RECEPTACLE.

GENERAL OPERATING PROCEDURES

Proofing
Proofing is one of the most important and delicate stages in baking. About 50% of the product volume is created in the proofer. Proofing accelerates the fermentation of yeast in a warm moist environment causing the dough to rise. The proofer humidity should be between medium high and high. For optimum results, rolls should be removed from the hot proofer and transferred to the cold proofer at minimum proof. This will ensure that they can be held for 40 minutes without becoming over-proofed.

OPERATING INSTRUCTIONS

Startup

1. Push ON/OFF rocker switch to “ON” position

2. Push HEAT/PROOF switch to HEAT for heating.

3. Turn HEAT thermostat knob fully clockwise for pre-heat.

4. Allow 45 minutes for pre-heating, then turn thermostat to desired setting.

5. For proofing, push HEAT/PROOF switch to PROOF. DO NOT RUN WATER PAN EMPTY.
   Note: While in proof mode only the element around the water pan is on.

6. Adjust the heat and humidity thermostat knobs to control desired temp and humidity. 45 min pre-heating.
   Note : The internal air circulation blower will operate continuously when the power switch is turned “ON”.

Heat Knob (Heat Mode)
The controlling range is 80° to 185°F ( 26° to 85°C) temperatures vary slightly between insulated and non-insulated units. The dial has setting from 1 to 9 that do not relate to any specific calibrated temperatures. Temperature settings must be obtained through familiarization with the unit. While in the heat mode this knob controls the two elements in the air stream, in the “OFF” position the elements are turned off. During the “Proof” mode one of these elements is not in use.

Humidity Knob (Proof Mode)
To control the humidity range from 30% to 100% humidity, settings must be obtained through familiarization with the unit. The dial has a range of 1 – 9 which determins the temperature of the water in the pan, if you have the knob in the “OFF” position it will turn the proofing element off. While in proof mode the unit will operate at a lower termperature.
Allow 45 minutes to pre-heat in both heat & proof cycle.

TROUBLESHOOTING

CAUTION : Before disassembling unit, electrical power must be disconnected by unplugging the unit. Failure to unplug the unit prior to servicing may result in electrical shock. Each unit is shipped with an instruction manual to be used as a reference guide for all service areas. The manual shows a picture of the drawer, showing the location of electrical components and a description of each. If the unit does not operate correctly, or malfunctions for any reason, the following checklist should provide a solution.

1. Check to make sure cord set is firmly plugged into the power receptacle in the back of the cabinet and into the wall outlet.
2. Check circuit breaker of wall outlet and reset if necessary.
3. Remove heat drawer from cabinet. Remove bottom cover of drawer. Visually inspect for:
4. Loose or disconnected wires
5. Black marks or burning on any components
6. Loose heating elements.
7. If any burn marks or discoloration of wires is note on any components along with all wires attached to damaged components must be replaced.
8. If heater element is loose, or if it has broken loose from mounting tabs, the wires will short out on the Metal, causing permanent damage. Both the element and main power switch (with wires on switch) must be replaced.
9. If temperature on “L.E.D. Thermometer” is not reading a constant temperature, it must be replaced. If temperature has exceeded 200°F (93°C) it must be lowered immediately to maximum temperature of 185°F (85°C)

PARTS LIST

Central Products: Heater / Proofer Model: E9451 & 9451

Fig No| Part Number| Qty| Description| Application
1| 2R-4FM0705P| 1| PULL,ALM DRWR,DIE CST,BUF|
2| R2-AC1323| 1| BAFFLE| 9451-12CDCP, 9451-12SDCP, E9451-12CDCP, E9451-12SDCP
R2-WH2006| 9451-34CDCP, 9451-34SDCP, E9451-34CDCP, E9451-35SDCP
3| 2C-1525| 2| SCREW 1/4-20X1-1/4 RH ST|

4

| R2-WASSY001|

1

| ASSY,DOOR,CLEAR,NHPL-1836| 9451-34CDCP, E9451-34CDCP
R2-WASSY003| ASSY,DOOR,SOLID,NHP-1836| 9451-34SDCP, E9451-34SDCP
R2-WASSY022| ASSY,DOOR,RH,E9451-HP12CD| 9451-12CDCP, E9451-12CDCP
R2-WASSY057| ASSY,DOOR,RH, SOLID DOOR| 9451-12SDCP, E9451-12SDCP
5| 2I-4FMD345P| 1| 18.63X52.70 GSK, BLK, MAG| E9451-34, 9451-34
2I-4FMD405P| GASKET,BLK,MAG,18.63X16.5| E9451-12, 9451-12
6| 2V-4FM0003P| 2| HINGE,ASSY,2”,S/S|
7| R2-TC0075| 1| PAN ASSY.|
8| 2P-738ABK| 4| CASTER,5×1.25,SWIVEL,POLY|
9| 2R-4FMBC01P| 4| CORNER BUMPER J-J-B12 BLA|
10| 2C-Z15625| 16| SCREW 10-32-1 FLT HD PHIL|
11| R2-Z17184| 1| CORD BRACKET|
12| R2-WH2020| 1| BOTTOM COVER|
13| 2I-6STRN05P| 6| GROMMET,7/16X1/16X1/4X3/4|
14| R2-WH2014| 1| ELECT BULKHEAD|
15| 2U-WP-6FANS30P| 1| 6IN TRANSFLOW FAN 115V/60|
16| 2C-1493| 7| SCREW 8-32X3/8 RHP STL NP|
17| R2-WH2015| 1| BULKHEAD, MOTOR|
18| 2C-8833| 37| SCREW 8-18X1/2 HEX STL NP|
19| 2N-6FME755P| 1| ELEMENT,120V,600W|
20| 2N-6WH0001P| 1| ELEMENT,HTPRF 600W/120V|
21| 2N-6WH0002P| 1| ELEMENT,HTPRF 900W|
22| R2-WH2022| 1| PROBE HOLDER TOP|
23| R2-WH2023| 1| PROBE HOLDER BOTTOM|
24| 2C-2582| 7| NUT 1/4-20 HEX STL NP|
25| 2C-Z5557| 7| WASHER 1/4 SPLIT SS|
26| R2-AP2102| 1| PROBE HOLDER|
27| R2-WH2012| 1| REAR COVER PLATE|
28| 2E-50-1382| 1| OUTLET,NEMA 5-20R|
29| 2T-66-1150| 1| DISC,SNAP,275*F|
30| 2T-66-1121| 2| THERMOSTAT,85-180 DEG,MEC|
31| R2-AC2337| 1| FRONT CONTROL PNL|
32| 2M-Z18490| 1| GRAPHIC, HEAT\PROOF|
33| 2J-50-0029| 2| LIGHT,PILOT,RED NEON,125V|
34| 2E-50-1355| 1| SWITCH,ROCKER,SPST,ON-OFF| Main Power Switch
35| 2R-50-0726| 2| KNOB,TEMP.BOARD CONTROL|
36| 2E-50-1357| 1| SWITCH,ROCKER,DPDT,ON-ON| Heat / Proof Select Switch
37| R2-TC0092| 1| HP MODULE|
NI| 2C-20304-02| 1| NUT WING 1/4-20 STN STL|
NI| 2E-6WH0040P| 1| CORD,POWER,6’FT LONG H-10|
NI| 2C-Z15532| 1| CABLE CLAMP|
NI| R2-AC1330| 1| SIDE, OUTER RIGHT| 9451-12CDCP, 9451-12SDCP
NI| R2-AC1331| 1| SIDE, OUTER LEFT| 9451-12CDCP, 9451-12SDCP
NI| R2-AC2515| 1| SIDE-O/D-LT| 9451-34CDCP, 9451-35SDCP
NI| R2-AC2516-C| 1| SIDE-O/D-RT| 9451-35CDCP, 9451-34SDCP

HEATER PROOFER WIRING DIAGRAM

References

• Manual-Hub.com - Free PDF manuals!
• Star - Innovation. Technology. Performance
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>