Tranquillo B0B9MQSB9M Hammock Chair Stand with Portable Hammock Nest Instruction Manual
- June 14, 2024
- Tranquillo
Table of Contents
**Tranquillo B0B9MQSB9M Hammock Chair Stand with Portable Hammock Nest Instruction Manual
**
WHAT’S IN THE BOX
1 x Hammock Stand
1 x Hardware Set, including:
- 2 x Straps
- 2 x S-hooks
- 9 x bolt with plastic knob 20 x 8mm
- 3 x bolt with plastic knob 35 x 6mm
Read all assembly and care instructions carefully before using this product. Save these instructions for future reference.
- Select a smooth, level surface to place the hammock stand.
- Assemble components on a soft, clean surface to avoid scratching and/or damaging the finish.
- Ensure all parts are accounted for before disposing of packaging.
WARRANTY INFORMATION
Thank you for choosing Tranquillo. We stand behind our brand and the quality
of the items we sell. Tranquillo is not responsible for normal wear and tear,
for products used commercially or for failures caused by accidents, abuse,
alteration, modification, misuse or improper care.
There are no other express warranties beyond the terms of this limited
warranty. In no event shall any implied warranties, including merchantability
and fitness for a particular purpose, extend beyond the duration of the
express warranty contained herein. In no event shall Tranquillo be liable for
incidental or consequential damages. We offer 12-month warranty on base stand.
Replacement parts or products will be sent at our discretion if the defect is
the result of any fault on our side. Proof of purchase, with the date of
purchase as well as photos of the defective merchandise, must be provided.
Photos are used to determine the cause of defects and for future quality
control.
Please contact Tranquillo Customer Service directly; or if you have any
questions, comments or concerns by emailing us at:
customerservice@tranquillohomes.com,
or via our Contact Us page at www.tranquillohomes.com/contact-
us/
ASSEMBLY
IMPORTANT INFORMATION
Under normal use, Tranquillo ALine hammock chair will last for years. It is, however, important to follow basic care tips to prolong the life of your stand.
USE & CARE
-
Before each use, inspect your hammock for wear and weakness.
-
Take your time getting into and out of your hammock. Any hammock may tip if your weight is not centered.
-
Ensure the stand is assembled correctly and the hardware is securely tightened before each use.
-
Swinging, bouncing, jumping and other excessive movements may cause serious injuries including, but not limited to, the stand tipping over.
-
Supervise children at all times. Do not allow children to play or sleep in hammocks when used with this stand without constant supervision.
-
Pets should not be allowed into hammocks as it may result in injuries or damage the product.
-
Do not exceed the recommended weight capacity of the base stand.
-
Store the base stand indoors when not in use. Cool, dry locations are recommended to prevent damage that may result from exposure to moisture and other environmental elements.
-
The powder coating on the stand is tough and durable but, even under normal use, some scratching is inevitable.
To avoid excessive rust, wipe scratched areas as needed to remove moisture. -
Use a soft cloth and warm water to wipe down the stand, if necessary. Dry the stand after cleaning and before storing to prevent rust.
TROUBLESHOOTING
If the stand seems unstable, make sure it is on a level surface and the feet are correctly distributed as shown in the assembly instructions. Also make sure that all components are assembled correctly and the hardware is securely tightened.
Any modification or failure to follow the recommended care will void the product warranty.
WARNING
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, Improper use, inadequate maintenance, or neglect of this product.
PORTABLE NEST + STRAP + CEILING MOUNT
Read all assembly and care instructions carefully before using this product. Save these instructions for future reference.
- Assemble components on a soft, clean surface to avoid scratching and/or damaging the finish.
- Ensure all parts are accounted for before disposing of packaging.
IMPORTANT INFORMATION
- Before each use, inspect your mount for wear and weakness.
- Ensure the mount is assembled correctly and the hardware is securely tightened before each use.
- Swinging, bouncing, jumping and other excessive movements may cause serious injuries.
- Do not exceed the recommended weight capacity of the mount and straps.
Any modification or failure to follow the recommended care will void the product warranty.
WARNING
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.