Logicbus GW-7472 Ethernet/IP to Modbus Gateway User Guide

: June 4, 2024
: Logicbus

Table of Contents

What’s in the shipping package?
Installing software on your PC
Connecting the Power and Host PC
Searching the GW-7472
Module configuration
Module Diagnostic
Related Information
Documents / Resources

GW-7472 QUICK START
For GW-7472
**Dec. 2014/ Version 2.1

**

What’s in the shipping package?

The package includes the following items:

****	GW-7472
Software CD
Quick Start Guide(This Document)
CA-002 (DC connector to 2-wire power cable)

Installing software on your PC

Install GW-7472 Utility:
The software is located at Fieldbus_CD:\EtherNetIP\Gateway\GW-7472\Utility
http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethernetip/gateway/gw-7472/utility/

Connecting the Power and Host PC

Make sure your PC has workable network settings.
Disable or well configure your Windows firewall and anti-virus firewall first, else the “Network Scan” on steps 4, 5, and 6 may not work. (Please contact your system Administrator)
Check Init/Run DIP switch if it is in the Init position.
Connect both the GW-7472 and your computer to the same sub-network or the same Ethernet switch, and power the GW7472 on.

Searching the GW-7472

Double-click the GW-7472 Utility shortcut on the desktop.
Click the “Network Scan” button to search your GW-7472.
Select the “Configure” or “Diagnostic” buttons to configure or test the module

Module configuration

Double-click the GW-7472 Utility shortcut on the desktop.
Click the “Network Scan” button to search your GW-7472.
Select the “Configure” buttons to configure the module
After setting, click the “Update Settings” button to finish the
Item| Settings (Init Mode)
---|---
IP| 192.168.255.1
Gateway| 192.168.0.1
Mask| 255.255.0.0

Item Descriptions:

Item|

Description

---|---
Network Settings| For configuration of the Address Type , Static IP Address , Subnet Mask, and Default Gateway of the GW-7472 Please refer to the section “ 4.2.1 Network Settings ”
Modbus RTU Port Settings| For configuration of the Baud Rate , Data Sizes , Parity , Stop Bits , of the RS-485/RS-422 port of the GW-7472 Please, refer to the section “ 4.2.2 Modbus RTU Serial Port
Settings ”
Modbus TCP Server IP Setting| For configuration of the IP of each Modbus TCP server.
Please refer to section “ 4.2.3 Modbus TCP Server IP Settings ”
Setting File Management| For the setting files management of GW-7472.
Please refer to section “ 4.2.4 Setting File Management ”
Byte Order Setting| For configuration of the order of two bytes in a word of AI and AO
Please refer to section “ 4.2.5 Byte Order Setting ”
Modbus Request Command Setting| Modbus commands to communicate with the Modbus slaves
Please refer to section “ 4.2.6 Modbus Request Settings ”

Module Diagnostic

Check Init/Run switch if it is in the Run position.
Reboot your GW-7472. Then, reconnect it by the utility.
Click the “Diagnostic” button to open the diagnostic window.
Item Descriptions: Item|

Description

---|---
UCMM/Forward Open Class 3 Behavior| Send UCMM packets or use the Forward_Open service to build the CIP class 3 connection to communicate with the GW-7472. Please refer to section “ 4.3.1 UCMM/Forward Open Class 3 Behavior ”
Forward Open Class1 Behavior| Use the Forward_Open service to build the CIP class 1 connection to communicate with the GW-7472. Please refer to section “ 4.3.2 Forward Open Class 1 Behavior ”
Response Message| EtherNet/IP packets responded from the GW-7472.
Modbus TCP Servers Status| The connection status of Modbus TCP servers. Please refer to the section “ 4.3.3 Modbus TCP Servers Status ”

GW-7472 Product page:
http://www.icpdas.com/products/Remote_IO/can_bus/GW-7472.htm
GW-7472 Documentations:
Fieldbus_CD:\EtherNetIP\Gateway\GW-7472\Manual
http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethernetip/gateway/gw-7472/manual/
GW-7472 Utility:
Fieldbus_CD:\EtherNetIP\Gateway\GW-7472\Utility
http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethernetip/gateway/gw-7472/utility/
GW-7472 firmware:
Fieldbus_CD:\EtherNetIP\Gateway\GW-7472\firmware
http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethernetip/gateway/gw-7472/firmware/ Logicbus
GW 7472 Ethernet IP to Modbus Gateway -Update Settings 2

[email protected]
+52(33)-3823-4349
www.tienda.logicbus.com.mx

Documents / Resources

| Logicbus GW-7472 Ethernet/IP to Modbus Gateway [pdf] User Guide
GW-7472 Ethernet IP to Modbus Gateway, GW-7472, Ethernet Gateway, Gateway, IP to Modbus Gateway, Gateway, Modbus Gateway
---|---