WaterGuru Inc WGSENSE25 Sense System Assembly User Manual
- June 13, 2024
- WaterGuru Inc
Table of Contents
WaterGuru Inc WGSENSE25 Sense System Assembly
Product Information
The Sense2.5 is a device designed to measure water quality. It operates by using a test cassette that detects the color change of a pad, indicating the water quality level.
Product Usage Instructions
- Ensure that the device is used with the test cassette provided.
- Prepare the water sample that you want to test.
- Insert the test cassette into the device according to the instructions provided in the user manual.
- Dip the pad of the test cassette into the water sample, allowing it to fully absorb the water.
- Observe the color change of the pad on the detection cassette.
- Compare the color of the pad with the provided color chart to determine the water quality level.
- If the color indicates a normal water quality level, the water is within an acceptable range.
- For additional details about the device and its usage, please refer to our website for an introduction.
- If you require further assistance or technical support, please consult our team of technical engineers.
Sense2.5 User manual
- Product name: Sense System Assembly
- Model: WGSENSE2.5
- Powersupply: C type alkaline battery*4pcs.
- Auxiliary control equipment: Apple products @ iOS
General description:
Sense product is a swimming monitor and maintainer for pool water quality. It
can detect the water quality timely, such as PH value, chloride content and
other indicators and judge whether the values meets the standard. According to
the above test results, the user will release chemicals to balance the
chemical parameters of the water, so as to improve the water quality to a
normal level.
The device can be controlled remotely, and it connects to Apple products via
WiFi.
FCC warning:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Sense2.5 Operation Description
Working Mechanism:
- The device must be used with the test cassette.
- The color of the pad on the detection cassette will change with the water quality. The optical devices on the Sense can sense the above color changes and calculate the chemical parameters of the effluent (PH value, chloride ion content, etc.) and judge whether the values meets the standard.
- If the above parameters are not met to standard, the user will release chemicals to balance the chemical parameters of the water, so as to improve the water quality to a normal level.
- The device can be controlled remotely, and it connects to Apple products via WiFi.
Operational processing:
- Put 4 pcs C type alkaline batteries into the battery box. The device is powered on.
- Turn on your Apple device and connect Sense project and Apple products via WiFi.
- Products are monitored remotely through WiFi, water quality is detected and reported.
- If the above result is not met the standard, the user will release chemicals to balance the chemical parameters of the water, so as to improve the water quality to a normal level.
- For additional details, please visit our website for introduction, or consult our technical engineers for support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>