maytronics LIBERTY 200 Cordless Robotic Pool Cleaner User Guide

maytronics LIBERTY 200 Cordless Robotic Pool Cleaner

Product Information

The Maytronics Dolphin Robotic Pool Cleaner is a cordless pool cleaning device. It comes with various features and indications to ensure effective and efficient cleaning of your pool. The LIBERTY 300 model includes additional filter panels for enhanced filtration. The cleaner is equipped with battery indicators and a power button for easy operation. It also comes with an inductive charger connection for convenient charging.

Features

• Settings or status indicator
• Battery indicators
• Power button
• Inductive charger connection
• Extra filter panels (LIBERTY 300 only)
• Filter basket with grab hook

Usage Instructions

First Time Use

1. Plug the charger into an outlet.
2. Connect the inductive charger to the robot.
3. Peel off the sticker.
4. Charge the battery to 100% – indicated by 3 green bars.
5. Unplug the inductive charger.
6. Press the power button. The robot will start working within 30 seconds.
7. Put the robot in the pool. The default mode is 90 minutes of floor and walls cleaning.

Cycle Selector – LIBERTY 300:

Use the Cycle Selector to customize the cleaning mode to Floor only:

1. Press ON to activate until the LED lights up.
2. Press ON again for 3-6 seconds until the purple LED blinks 3 times.
3. Place the robot in the pool, and within 30 seconds, it will start working.
4. After each cleaning cycle, the robot will return to the default Floor and Walls mode.

Eco Mode – LIBERTY 300:

Use Eco Mode to keep your pool floor clean for a week on one charge:

1. Press ON to activate until the LED lights up.
2. Press ON again for 6 seconds until the green LED blinks.
3. Place the robot in the pool, and within 30 seconds, it will start working.

In case of error notification, please refer to the User Manual for troubleshooting instructions.

Removing the Robot Out of the Pool Using Grab Hook:

1. Attach a standard pole (not included) to the grab hook.
2. Use the grab hook to lift the robot out of the pool.

Cleaning the Filter Basket:

1. Remove the filter basket from the robot.
2. Clean the filter basket by rinsing it with water.
3. Replace the filter basket back into the robot.
4. Dispose of the collected debris properly.

Using Clicker (On LIBERTY 300):

1. Follow the specific instructions provided in the User Manual for using the Clicker with LIBERTY 300 model.

For more information and detailed instructions, please refer to the user manual available at www.maytronics.com.

Maytronics Dolphin Cordless Robotic Pool Cleaner

What’s in the Box

First Time Use

1. Plug the charger to outlet
2. Connect the inductive charger to the robot
3. Peel-off the sticker
4. Charge the battery to 100% – 3 green bars
5. Unplug the inductive charger
6. Press the power button. The robot will start working within 30 sec
7. Put the robot in the pool. Default mode: 90 min of floor and walls cleaning

Features and Indications

Cycle Selector – LIBERTY 300

• Use Cycle Selector to customize cleaning mode to “Floor only”:

1. Press ON to activate until the LED lights up.
2. Press ON again for 3-6 seconds until the purple LED blinks 3 times. Place the robot in the pool, and within 30 sec, it will start working. After each cleaning cycle, the robot will return to default Floor and Walls” mode.

Eco Mode – LIBERTY 300

• Use Eco Mode to keep your pool floor clean for a week on one charge. The robot will automaticly clean the pool floor for up to 30 min, 3 times a week, with 48 hours between cleaning cycles.

1. Press ON to activate until LED lights up.
2. Press ON again for 6 seconds until green LED blinks. Place the robot in the pool, and within 30 sec, it will start working.

Temperature Warning

• In case of temperature warning notification, place and charge the pool cleaner in a protected and shaded area, at a temperature range of 43°F – 95°F / 6°C – 35°C.

Error

• In case of error notification, please refer to User Manual.

Charging Recommendations

• When the battery is low and all indicators are off – the cleaner is on standby mode.
• Connect to charger to wake it up.
• Always Charge the pool cleaner in a protected and shaded area at a temperature range of 43°F – 95°F / 6°C – 35°C, until you see 3 green bars in the battery indicator panel (up to 6 hours).
• The charger is waterproof, the robot can be charged when wet. However, do not put the charger in the water.

Off-Season Storage

• Before off-season storage – Charge the battery at least 50%
• (2 green bars in the battery indicator panel).
• Recommended storage temperature range: 14°F – 104°F / -10°C – 40°C. After off-season storage, charge the robot to its fullest.

Removing the Robot Out of the Pool Using grab hook

Cleaning the Filter Basket

Using clicker

Info and recommendations

Note

• Keep your fingers away from the impeller motor area to avoid injury.
• Ensure that electrical outlet is protected by a ground fault interrupter (GFI) or earth leakage interrupter.
• Do not put the charger in the pool.
• Do not enter the pool while the pool cleaner is working.
• In case of any physical damage to the robot or the charger, contact Customer Care for instructions.
• Water temperature range: 43°F – 95°F / 6°C – 35°C
• Water depth range: 1.33ft/0.4m – 8.2ft/2.5m
• Motor protection: IP 68
• Chlorine – 4 ppm, Max pH – 7.0-7.8 NaCl – 5000 ppm, Max.
• Battery Lithium-ion | 5,000mAh
• Charger protection: IP 54
• Scan for user manual
• For more information www.maytronics.com

Documents / Resources

| maytronics LIBERTY 200 Cordless Robotic Pool Cleaner [pdf] User Guide
LIBERTY, LIBERTY 200, LIBERTY 200 Cordless Robotic Pool Cleaner, Cordless Robotic Pool Cleaner, Robotic Pool Cleaner, Pool Cleaner, Cleaner
---|---

References

• Dolphin Robotic Swimming Pool Cleaner | Maytronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>