LightStyles PND-2233 River Pendant Lights Installation Guide

Pendant installation
Assembly Instructions
Model No.PND-2233

PND-2233 River Pendant Lights

CAUTION

• Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
• Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

TOOLS REQUIRED

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

STEP 1
Install the main body, and install the straight rod-canopy-glass-metal cover in turn as shown in the figure

STEP 2
Use the mounting screws to attach the mounting unit to the junction box

STEP 3
Make the electrical connection from the junction box to thefixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw.
Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape

Connect Clear, Brown, Gold or Black Parallel Wire without tracer (round & smooth) or Black Fixture Wire to:| Connect Clear, Brown, Gold or Black *Parallel Wire with tracer (square & ridged) or White Fixture Wire to:
---|---
Black or Red Supply Wire or Insulated Wire (other than green) with copper conductor.| White Supply Wire or Insulated Wire (other than green) with silver conductor

STEP 4
Place the canopy over the mounting unit and secure the fixture with the cap nuts.

STEP 5
Install bulb(Not Included) E26 TYPE T 60W

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>