ARGIGU BL-HJ07 Spaceman Music Star Light User Manual
- June 13, 2024
- ARGIGU
Table of Contents
BL-HJ07 Spaceman Music Star Light
Unboxing Check
- Thank you for purchasing our products, please read the user manual carefully before use. The user manual contains necessary safety advice and user instructions, follow them to operate to avoid damaging the product for misuse.
- Check the product to ensure it is in good condition when received. Do not disassemble the host and component by yourself.
Package List
- Rocket Astronaut Music Star Light x 1
- Remote Control x 1
- Type-C USB Cable x 1
- User Manual x 1
Notice
- Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
- This product is suitable for indoor use:
- Please do not shine the star directly into your eyes and keep it away from children.
- The product is projected by LED and star combinations.
Warning:
This product requires a USB Type-C DC 5V/2A power supply. The product has
undergone rigorous and comprehensive testing before leaving the factory.
Users should strictly adhere to the warnings and instructions. Disassembling
the main unit and accessories is strictly prohibited. Improper use resulting
in product damage is not covered under our warranty. Please use the power
adapter correctly and ensure it falls within the specified range to avoid
affecting its lifespan.
Instructions for Use
- It can be used indoors and projected to the ceiling or wall.
- The product features built-in Bluetooth Music Speaker and can be connected via Bluetooth to play music using “BL-HJ07”.
- The product can be controlled using the wireless remote control. Ensure that the remote control is not far away from the product during use.
- Bluetooth Mode: The device can be connected to your cellphone via Bluetooth to directly play music. User can also use the Smart Night Light app to connect to the device, control the music star light’s on/off function, and switch its nebula light effects and star functions. This allows for the presentation of different functions such as nebula light effects, stars, and music playback individually or in combination.
- Timer Mode: User can use the remote control or the app to customize the automatic standby time of the product.
- Rhythm Mode: By pressing the rhythm button on the remote control or the rhythm button on the main interface of the app, user can enable the rhythm function. In this mode, the projected light of the product wil flicker and change according to the rhythm of the music.
- White Noise Mode: The main unit is equipped with 15 white noise tracks that can be played using the remote control or the app.
- Night Light Mode: By using the remote control or pressing the night light button, you can change the lighting effect of the night light. The night light will automatically turn on when plugged in and will default to automatically turn off after 12 hours.
Manual Mode
Note: When the Rocket Astronaut Music Star Light is plugged in, it defaults to
blue and green nebula rotation and the stars are in breathing mode. The main
unit will automatically shut down after 4 hours.
Host button function descriptions
- Long press 3 seconds to power on/off, short press to play/pause music
- Bluetooth and white noise mode switching
- Short press to play previous song; Long press to reduce volume:
- Short press to play next song; Long press to increase volume
- Type-C Power Input: 5V/2A
- Night Light Button: Short press to change the lighting effect, long press to turn on or turn off the night ight.
Remote control function description
After turning on the LED nebula light, click the RGBW LED nebula button again to enable/disable the colorful nebula overlay. Using the remote control, you can enable the dual-color LED nebula overlay effect at most.
-
Power ON/OFF
-
Star light switch ON/OFF
-
Short press to switch between Bluetooth mode and white noise mode;
long press to disconnect Bluetooth and pair again. -
LED red light
-
LED green light
-
LED blue light
-
LED white light
-
Control device volume up
-
Control device volume down
-
Select playing previous song
-
Select playing next song
-
Play/Pause
-
Switch ON/OFF the LED light
-
Single-color breathing cycle mode/Dual-color breathing cycle mode
-
Rhythm Mode switch ON/OFF
-
Short press to switch the night light color, long press to turn on/off the night light
-
Nebula brightness adjustment (Four-level cycle)
-
Nebula rotation speed adjustment (Stop-Slow-Medium-Fast, Four-level cycle)
-
Hour auto-off timer (The light flash once as prompting)
-
Hours auto-off timer (The light flash 2 times as prompting)
-
Timer off (The light flash 3 times as prompting)
App Operations
Bluetooth Mode
- Please turn on your phone Bluetooth, or the product won’t be connected;
- For Android, please allow access to the location and turn on the location.
Download the App
-
Download the app by scanning the following QR code
http://www.zoqin.com/APP/QRCODE/SmartNightLight.html -
Search “Smart Night Light” app through Google Play (for Android) or APP Store(for Apple-iOS) and download it.
Operate “Smart Night Light” app
- Open the “Smart Night Light” app.
- Log in your account and password. Please register a new account on first use, or use a guest account login.
How to pair with your phone
Notice: Please allow the app to access Bluetooth and previously turn on the
Bluetooth. For Android, please also allow access to the location and turn on
the location.
Connect the music star light with the power supply, enter the app interface,
click “Add Device”/”+” to “Product Selection” interface. Choose the “Rocket
Astronaut Music Star Light”, it will skip to “Find the Device” interface, keep
the device close to the phone app for identification, see the pop-up shown,
then add the found device.
APP Functions
Click on the “Rocket Astronaut Music Star Light” icon to enter the main
interface, touch the Power Switch to tum on/off the music star light.
Custom the product name via the icon * ” at the top right-hand comer, turn on
the voice-activated mode via Micro“ ” button.
Click “Timer” icon to set a timer of the device auto turn on/off:
Make the device automatically turn on/off in a custom time.
(Note: It is not possible to set the device to automatically shut down after
more than 4 hours.)
Click the “Countdown” icon to enter the countdown
function interface. When the main unit is tured on, click the “Start” button
to activate the countdown shutdown function. When the main unit is turned off,
click the “Start” button to activate the countdown startup function. Click the
“Stop” button to cancel the set countdown command. 
Four main interfaces
as follows:
- Nebula Interface;
- Star Light Interface;
- Music Play Interface;
- Scenario Interface.
Nebula Interface
Star Light Interface
Music Play Interface
Select the rhythm scene, where the lights will dance to the music
Scenario Interface
-
Features as follows: Custom scenario mode, choose the modes combination:
-
Turn on/off the nebula light
-
Colour light/White light combination, adjust brightness, 3 color changing modes:
a. Static mode; b. Flash mode; c. Breathe mode. Custom the color changed speed in static, flash and breathe modes; -
Star light on/off, adjust starlight brightness, star light breathe mode on/off;
-
Choose your custom scenario and save your rename, convenient to restart your favorite scenario effects next time.
-
Preset Scenario Mode Selection: Click the preset scenario icon, select 48 kinds of scenario mode effects in the system
Troubleshooting – Fail to Connect to Phone Bluetooth
- Please check your phone Bluetooth access permission and tum on the Bluetooth. (for Android, please also allow access to the location and turn on the location)
- Please check if the music star light is powered on and within the 10m/32.8ft connection range:
- Please check if your phone i connected to the correct Bluetooth model BL-HJO7.
- Please check if your phone network works normally.
Specifications
| Host Material | ABS |
|---|---|
| Input Rated Voltage | 5V DC |
| Maximum Power | 10W |
| Maximum Working Current | 2.0A |
| Projection Light Source | LED light bead |
| Projector Light Source Wavelength | Red light beads (620-625nm), Green light |
beads (520-525nm), Blue light beads (460-465nm), White light beads (color
temperature 1500-15000k), Star light wavelength (532nm)
Projection Distance| 2m-10nv/6.56-32.80ft
Projection Area| The projection area is Ami /ABasg tt ata distance of
3m/9.84ft, and 75n7/807sq.ft at a distance of 5m/16.4ft
Speaker Parameter| 403W
Motor| Starting Voltage: 3V, with 1-4 r/min
Operating Temperature| -20~50°C/-4~122 F
Storage Temperature| -20~60°C/-4~140°F
Product Model| BL-HJ07
Bluetooth Version| Bluetooth 5.1
FCC ID| IAXGMRI -HIO7
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the imits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
tuming the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment nto an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.